THEVAM83D [CEL]
LVDS Single Link Evaluation Board;型号: | THEVAM83D |
厂家: | CALIFORNIA EASTERN LABS |
描述: | LVDS Single Link Evaluation Board |
文件: | 总10页 (文件大小:1261K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
To Our Customers
Continuing it’s rich tradition of partnering with high quality
Japanese semiconductor suppliers, CEL is now partnering with
THine from May of 2015 onwards.
www.cel.com
THAN0184_Rev.1. 0_E
THC63LVDM83D / THC63LVDF(R)84C Evaluation Kit
LVDS Single Link Evaluation Board
Parts Number: THEVAM83D, THEVAF(R)84C
1.General Description
2. Features
THEVAM83D and, THEVAF(R)84C boards are
designed to support video data transmission
between the host and display. One high-speed lane
can carry up to 24bits data and 3bits of
synchronizing signals at a pixel clock frequency
from 8MHz to 160MHz.
Compatible with TIA/EIA-644 LVDS Standard
7:1 LVDS Transmitter and Receiver
Single power supply
Power Down Mode
< THEVAM83D>
LVDS swing is reducible as 200mV by RS-pin
to reduce EMI and power consumption.
Input clock triggering edge is selectable by
R/F-pin
< THEVAF84C> Falling Edge Clock
< THEVAR84C> Rising Edge Clock
Table 1 Clock Frequency
Type
Tx
Rx
Parts Number
THEVAM83D
THEVAF(R)84C
TTL Clock Freq.
8MHz to 160MHz
8MHz to 112MHz
3. Overview
(a) THEVAM83D (Top Side)
(b) THEVAF(R)84C (Top Side)
Figure 1 THEVAM83D and THEVAF(R)84C Top Side View
(a) THEVAM83D (Bottom Side)
(b)THEVAF(R)84C (Bottom Side)
Figure 2 THEVAM83D and THEVAF(R)84C Bottom Side View
THine Electronics, Inc.
Security
Copyright(C) 2015 THine Electronics, Inc.
1/9
THAN0184_Rev.1. 0_E
4. Power Supply Set Up
This chapter shows power supply condition.
Caution: Please check if there is no power-GND short on below red trace before supplying any power.
3.3V Power Supply to Each Board
Each evaluation board require 3.3V power supply. Please use “CON1” connector typically.
Ground
3.3V Power Supply
(a)THEVAM83D
(b) THEVAF(R)84C
Figure 3 Power Supply for Evaluation Board
Power Supply from / to Connector
3.3V power supply can be connected to Header1 and CON2 by using W1 and W2solder jumper.
THEVAM83D
W1: Connect the 3.3V power supply with pin#29 and 30 of CON2.
W2: Connect the 3.3V power supply with pin#1, 2 and 3 of Header1.
Figure 4 THEVAM83D Power Supply from / to Each Connector
THine Electronics, Inc.
Security
Copyright(C) 2015 THine Electronics, Inc.
2/9
THAN0184_Rev.1. 0_E
THEVAF(R)84C
W1: Connect the 3.3V power supply with pin#1, 2 and 3 of Header1.
W2: Connect the 3.3V power supply with pin#1 and 2 of CON2.
W1
W2
Figure 5 THEVAF(R)84C Power Supply from / to Each Connect
5. Function Setting
Setting pin of each boards are shown in yellow area of figure 6. HEADER is connected to IC’s setting pin.
Each setting pin’s high or low setting can set by connecting HEADER and high level or low level.
(a)THEVAM83D
(b) THEVAF(R)84C
Figure 6 Position of Function Setting Pin
High setting
High side
Connected with
IC s setting pin
Low side
Low setting
Figure 7 High / Low Setting Description
THine Electronics, Inc.
Security
Copyright(C) 2015 THine Electronics, Inc.
3/9
THAN0184_Rev.1. 0_E
5. Function
This chapter shows function setting of THEVAM83D and THEVAF(R)84C.
Table 2 THEVAM83D Function Setting Description
Silk
Symbol
Function
Input clock triggering edge select input for latching input
RF
RF
data
H: Rising edge L: Falling edge
LVDS Swing Mode.
LVDS
Swing
Small Swing
Input Support
RS
RS
RS
VCC
0.6 to 1.4V
GND
350mV
350mV
200mV
N/A
RS=VREF
N/A
VREF : is Input Reference Voltage
Power down input.
PWDN
PWDN
H: Normal operation L: Power down
Table 3 THEVAF(R)84C Function Setting Description
Silk
Symbol
Function
Power down input.
PWDN
PWDN
H: Normal Operation L: Power Down
THine Electronics, Inc.
Security
Copyright(C) 2015 THine Electronics, Inc.
4/9
THAN0184_Rev.1. 0_E
6. Schematic
1
1
1
3
3
3
1
2
C C V
D N G
Figure 8 THEVAM83D Schematic
THine Electronics, Inc.
Security
Copyright(C) 2015 THine Electronics, Inc.
5/9
THAN0184_Rev.1. 0_E
1
3
1
2
C C V
D N G
Figure 9 THEVAF(R)84C Schematic
THine Electronics, Inc.
Security
Copyright(C) 2015 THine Electronics, Inc.
6/9
THAN0184_Rev.1. 0_E
7. Bills of Materials
Table 4 THEVAM83D BOM
TYPE
Capacitor
Capacitor
Capacitor
Connector
Connector
Connector
Header
Value / Part No.
Package
2012
1005
SPEC
Reference No.
C1, C2, C3, C4
C5, C6, C7, C12
C8, C9, C10, C11
CON1
CON2
Header1
Header2, Header3, Header4
IC1
Qty.
4
4
4
1
1
1
3
1
10uF
0.1uF
0.01uF
16V
16V
16V
2pin
1005
282836-2(NC)
52271-3069(NC)
PCN10-48P-2.54DSA_LEFT(NC)
3HEAD(NC)
THC63LVDM83D
MPZ1608R471A
SML-310MT
5mm_pitch
1mm_pitch
2.54mm_pitch
2.54mm_pitch
TSSOP56
1608
30pin
48pin
---
IC
Inductor
LED0
---
1.2A
GREEN
L1, L2, L3
D1
3
1
1608
Table 5 THEVAF(R)84C BOM
TYPE
Capacitor
Capacitor
Capacitor
Value / Part No.
10uF
0.1uF
Package
2012
1005
1005
SPEC
Reference No.
C1, C2, C3, C4
C5, C6, C7, C12
Qty.
4
4
16V
16V
16V
0.01uF
C8, C9, C10, C11
4
PCN10-48P-2.54DSA_RIGHT(N
C)
Connector
2.54mm_pitch
48pin
Header1
1
Connector
Connector
Header
IC
Inductor
LED0
52271-3069(NC)
282836-2(NC)
3HEAD(NC)
THC63LVDF(R)84C
MPZ1608R471A
SML-310MT
1mm_pitch
5mm_pitch
2.54mm_pitch
TSSOP56
1608
30pin
2pin
---
---
1.2A
GREEN
CON2
CON1
Header2
IC1
L1, L2, L3
D1
1
1
1
1
3
1
1608
R2, R3, R4, R5, R8, R11, R13, R14,
R16, R17, R18, R19, R21, R24, R26,
R27, R29, R30, R31, R32, R33, R34,
R36, R38, R39, R40, R41, R42, R43
29
8
THine Electronics, Inc.
Security
Copyright(C) 2015 THine Electronics, Inc.
7/9
THAN0184_Rev.1. 0_E
8. Set items
Table 6 Set Items
TYPE
Part No.
282836-2
DC Connector
52271-3069
98267-0475
---
FFC Connector for LVDS Link
FFC 30pin 1mm pitch for LVDS Link
Pin Header
It's possible to mount these parts on this board and use.
THine Electronics, Inc.
Security
Copyright(C) 2015 THine Electronics, Inc.
8/9
THAN0184_Rev.1. 0_E
9. Notices and Requests
Please kindly read, understand and accept this “Notes and Requests” before using this product.
For the Material:
1. The product specifications described in this material are subject to change without prior notice.
2. The circuit diagrams described in this material are examples of the application which may not always
apply to design of respective customers. THine Electronics, Inc. (“THine”) is not responsible for
possible errors and omissions in this material. Please note if the errors or omissions should be found in
this material, THine may not be able to correct them immediately.
3. This material contains THine’s copyright, know-how or other proprietary. Copying or disclosing of the
contents of this material to any third party without THine’s prior permission is strictly prohibited.
For the Product:
1. This product is solely designed for evaluation purpose, and other purposes including mass production
and distribution are not intended.
2. This product has been solely manufactured for electric design engineers but not for end-users.
3. This product is not radiation-tolerant product.
4. This product is presumed to be used for general electric device, not for applications which require
extremely high-reliability/safety (including medical device concerned with critical care, aerospace
device, or nuclear power control device). Also, when using this product for any device concerned with
control and/or safety of transportation mean, traffic signal device, or other various types of safety
device, such use must be after applying appropriate measures to the product.
5. This product has been designed with the utmost care to accomplish the purpose of evaluation of IC
products manufactured by THine Electronics, Inc., however, THine MAKES NO WARRANTIES OR
REPRESENTATIONS WITH REGARD TO ANY PERFORMANCE OR FUNCTION OF THIS
PRODUCT IN ANY CIRCUMSTANCE.
6. This product has been manufactured with the utmost care in quality control and product reliability,
however, there may be faults or defects with a low but fixed probability, as inevitable phenomenon
concerned with semiconductor manufacturing processes. Therefore, Customers are encouraged to have
sufficiently redundant or error-preventive design applied to the use of the product so as not to have
THine’s product cause any social or public damage. Replacement of the product is only available in
case of obvious defects of mount devices at the point of unpacking the product. Neither replacement
nor failure analysis of the product is available in any other case of defects with the product and/or the
product’s components.
7. Customers are asked, if required, to judge by themselves on whether this product falls under the
category of strategic goods under the Foreign Exchange and Foreign Trade Control Law.
8. Please Note that if infringement of any third party’s industrial ownership should occur by using this
product, THine will be exempted from any responsibility unless it directly relates to the production
process or functions of the product.
9. Developing, designing and manufacturing of Customers’ own products, equipments or system by using
of this product is strictly prohibited in any way.
THine Electronics, Inc.
sales@thine.co.jp
THine Electronics, Inc.
Security
Copyright(C) 2015 THine Electronics, Inc.
9/9
相关型号:
©2020 ICPDF网 联系我们和版权申明