概述
数据手册UPG2183T6C-E2-A 概述
4W HIGH POWER SP4T SWITCH 4W大功率SP4T开关
UPG2183T6C-E2-A 数据手册
通过下载UPG2183T6C-E2-A数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载GaAs INTEGRATED CIRCUIT
PG2183T6C
4 W HIGH POWER SP4T SWITCH
DESCRIPTION
The PG2183T6C is a GaAs MMIC SP4T (Single Pole Four Throw) switch which was designed for digital cellular
phone application.
This device can operate frequency from 0.5 to 2.5 GHz, having the low insertion loss and high isolation.
This device is housed in a 16-pin plastic QFN (Quad Flat Non-leaded) (T6C) package. And this package is able
to high-density surface mounting.
FEATURES
• Supply voltage
: Vbat = 2.9 to 3.2 V (3.0 V TYP.)
: VDD (H) = 1.7 to Vbat V (2.65 V TYP.)
: VDD (L) = 0 to +0.05 V (0 V TYP.)
: Vcont (H) = 1.7 to Vbat V (2.65 V TYP.)
: Vcont (L) = 0 to +0.05 V (0 V TYP.)
: f = 0.5 to 2.5 GHz
• Standby mode voltage
• Switch control voltage
• Operating Frequency
• Low insertion loss
:
:
:
:
:
:
:
:
L
ins1 = 0.4 dB TYP. @ f = 0.5 to 1.0 GHz, Vbat = 3.0 V, VDD = Vcont(H) = 2.65 V, Vcont(L) = 0 V
ins2 = 0.55 dB TYP. @ f = 1.0 to 2.0 GHz, Vbat = 3.0 V, VDD = Vcont(H) = 2.65 V, Vcont(L) = 0 V
ins3 = 0.7 dB TYP. @ f = 2.0 to 2.5 GHz, Vbat = 3.0 V, VDD = Vcont(H) = 2.65 V, Vcont(L) = 0 V
L
L
• High isolation
ISL1 = 24 dB TYP. @ f = 0.5 to 1.0 GHz, Vbat = 3.0 V, VDD = Vcont(H) = 2.65 V, Vcont(L) = 0 V
ISL2 = 19 dB TYP. @ f = 1.0 to 2.0 GHz, Vbat = 3.0 V, VDD = Vcont(H) = 2.65 V, Vcont(L) = 0 V
ISL3 = 17 dB TYP. @ f = 2.0 to 2.5 GHz, Vbat = 3.0 V, VDD = Vcont(H) = 2.65 V, Vcont(L) = 0 V
• Handling power
P
in (0.1 dB) = +37.5 dBm TYP. @ f = 0.9 GHz, Vbat = 3.0 V, VDD = Vcont(H) = 2.65 V, Vcont(L) = 0 V
in (0.1 dB) = +35.0 dBm TYP. @ f = 1.8 GHz, Vbat = 3.0 V, VDD = Vcont(H) = 2.65 V, Vcont(L) = 0 V
P
• High-density surface mounting : 16-pin plastic QFN (T6C) package (3.0 3.0 0.75 mm)
APPLICATIONS
• Digital cellular phone etc.
ORDERING INFORMATION
Part Number
Order Number
Package
Marking
2183
Supplying Form
Embossed tape 12 mm wide
PG2183T6C-E2 PG2183T6C-E2-A 16-pin plastic QFN
(T6C) (Pb-Free)
Pin 13, 14, 15 and 16 face the perforation side of the tape
Qty 3 kpcs/reel
Remark To order evaluation samples, please contact your nearby sales office.
Part number for sample order: PG2183T6C-A
Caution Although this device is designed to be as robust as possible, ESD (Electrostatic
Discharge) can damage this device. This device must be protected at all times from ESD. Static
charges may easily produce potentials of several kilovolts on the human body or equipment, which
can discharge without detection. Industry-standard ESD precautions must be employed at all times.
Document No. PG10762EJ01V0DS (1st edition)
Date Published May 2009 NS
PG2183T6C
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
Pin No.
Pin Name
GND (N.C.)
VDD
1
2
3
Vcont2
4
Vcont1
5
GND
6
RF4
7
GND (N.C.)
RF3
8
9
GND (N.C.)
GND (N.C.)
ANT
10
11
12
13
14
15
16
GND (N.C.)
RF1
GND (N.C.)
RF2
Vbat
Remark Exposed pad : GND
SW TRUTH TABLE
Vbat
VDD
High
High
High
High
Low
Low
Low
Low
Vcont1
Low
Vcont2
Low
RF Path
ANT-RF1
ANT-RF2
ANT-RF3
ANT-RF4
ANT-RF1
ANT-RF2
ANT-RF3
ANT-RF4
Mode
High
High
High
High
High
High
High
High
Active mode
Active mode
Active mode
Active mode
Standby mode
Standby mode
Standby mode
Standby mode
Low
High
Low
High
High
Low
High
Low
Low
High
Low
High
High
High
2
Data Sheet PG10762EJ01V0DS
PG2183T6C
ABSOLUTE MAXIMUM RATINGS (TA = +25C, unless otherwise specified)
Parameter
Battery Voltage
Symbol
Vbat
Ratings
+4.2
Unit
V
Standby Mode Voltage
Switch Control Voltage
Input Power
VDD
Vcont
Pin
+4.2
V
+4.2
V
+38
dBm
C
C
Operating Ambient Temperature
Storage Temperature
TA
45 to +85
55 to +150
Tstg
RECOMMENDED OPERATING RANGE (TA = +25C, unless otherwise specified)
Parameter
Battery Voltage
Symbol
Vbat
MIN.
2.9
1.7
0
TYP.
3.0
2.65
0
MAX.
3.2
Unit
V
Standby Mode Voltage (H)
Standby Mode Voltage (L)
Switch Control Voltage (H)
Switch Control Voltage (L)
VDD (H)
VDD (L)
Vcont (H)
Vcont (L)
Vbat
V
0.05
Vbat
V
1.7
0
2.65
0
V
0.05
V
3
Data Sheet PG10762EJ01V0DS
PG2183T6C
ELECTRICAL CHARACTERISTICS
(TA = +25C, Vbat = 3.0 V, VDD = 2.65 V, Vcont (H) = 2.65 V, Vcont (L) = 0 V, Zo = 50 , DC blocking
capacitors = 56 pF, unless otherwise specified)
Parameter
Insertion Loss 1
Symbol
Lins1
Test Conditions
f = 0.5 to 1.0 GHz
MIN.
TYP.
0.4
0.55
0.7
24
MAX.
0.55
0.8
0.95
Unit
dB
Insertion Loss 2
Insertion Loss 3
Isolation 1
Lins2
f = 1.0 to 2.0 GHz
f = 2.0 to 2.5 GHz
f = 0.5 to 1.0 GHz
f = 1.0 to 2.0 GHz
f = 2.0 to 2.5 GHz
f = 0.5 to 2.5 GHz
f = 0.5 to 2.5 GHz
dB
Lins3
dB
ISL1
ISL2
ISL3
RLin
22
17
15
15
15
+37.0
dB
Isolation 2
19
dB
Isolation 3
17
dB
Input Return Loss
Output Return Loss
0.1 dB Loss Compression
Input Power 1 Note
0.1 dB Loss Compression
Input Power 2 Note
Harmonics 1
19
dB
RLout
19
dB
Pin (0.1 dB) 1 f = 0.9 GHz
Pin (0.1 dB) 2 f = 1.8 GHz
+37.5
dBm
+34.0
+35.0
dBm
2f0
3f0
f = 0.9 GHz, Pin = 34.5 dBm
75
75
72
75
0.55
65
65
62
62
1.5
dBc
dBc
dBc
dBc
mA
A
Harmonics 2
2f0
f = 1.8 GHz, Pin = 31.5 dBm
3f0
Battery Current 1
Ibat1
Ibat2
IDD1
IDD2
Icont 1-1
Icont 1-2
Icont 2-1
Icont 2-2
tSW
Active Mode, No RF
Standby Mode, No RF
VDD : High, No RF
VDD :Low, No RF
Battery Current 2
10
Switched Supply Current 1
Switched Supply Current 2
Control Current 1-1
Control Current 1-2
Control Current 2-1
Control Current 2-2
Switch Control Speed
Startup Time
0
0.1
mA
mA
A
0
0.1
Vcont1 : High, No RF
Vcont1 : Low, No RF
Vcont2 : High, No RF
Vcont2 : Low, No RF
50% CTL to 90/10%
100
100
100
100
0
100
100
100
100
5.0
0
A
0
A
0
A
0.5
s
Time for the switch to be operational
from that the switched supply voltage
(VDD) goes high.
100
s
Note Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear
range.
Caution This device is used it is necessary to use DC blocking capacitors.
The value of DC blocking capacitors should be chosen to accommodate the frequency of
operation, bandwidth, switching speed and the condition with actual board of your system. The
range of recommended DC blocking capacitor value is less than 56 pF.
4
Data Sheet PG10762EJ01V0DS
PG2183T6C
EVALUATION CIRCUIT
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
APPLICATION INFORMATION
• LESD provides a means to increase the ESD protection on a specific RF port, typically the port attached to the
antenna.
• The value may be tailored to provide specific electrical responses.
• The RF ground connections should be kept as short as possible and connected to directly to a good RF ground
for best performance.
5
Data Sheet PG10762EJ01V0DS
PG2183T6C
PERFORMANCE DATA
(TA = +25C, Vbat = 3.0 V, VDD = 2.65 V, Vcont (H) = 2.65 V, Vcont (L) = 0 V, DC blocking capacitors = 56
pF, unless otherwise specified)
Remark The graphs indicate nominal characteristics.
6
Data Sheet PG10762EJ01V0DS
PG2183T6C
Remark The graphs indicate nominal characteristics.
7
Data Sheet PG10762EJ01V0DS
PG2183T6C
REFERENCE DATA (TA = +25C, VDD = 1.8 V, Vcont (H) = 1.8 V, Vcont (L) = 0 V, DC blocking capacitors
= 56 pF, unless otherwise specified)
Remark The graphs indicate nominal characteristics.
8
Data Sheet PG10762EJ01V0DS
PG2183T6C
Remark The graphs indicate nominal characteristics.
9
Data Sheet PG10762EJ01V0DS
PG2183T6C
MOUNTING PAD LAYOUT DIMENSIONS
16-PIN PLASTIC QFN (T6C) (UNIT: mm)
Remark The mounting pad layout in this document is for reference only.
When designing PCB, please consider workability of mounting, solder joint reliability, prevention of
solder bridge and so on, in order to optimize the design.
10
Data Sheet PG10762EJ01V0DS
PG2183T6C
PACKAGE DIMENSIONS
16-PIN PLASTIC QFN (T6C) (UNIT: mm)
11
Data Sheet PG10762EJ01V0DS
PG2183T6C
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Infrared Reflow
Soldering Conditions
Condition Symbol
IR260
Peak temperature (package surface temperature)
Time at peak temperature
: 260C or below
: 10 seconds or less
: 60 seconds or less
: 12030 seconds
: 3 times
Time at temperature of 220C or higher
Preheating time at 120 to 180C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Partial Heating
Peak temperature (pin temperature)
: 350C or below
HS350
Soldering time (per side of device)
: 3 seconds or less
: 0.2%(Wt.) or below
Maximum chlorine content of rosin flux (% mass)
Caution Do not use different soldering methods together (except for partial heating).
12
Data Sheet PG10762EJ01V0DS
PG2183T6C
This product uses gallium arsenide (GaAs).
Caution GaAs Products
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the
following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
Data Sheet PG10762EJ01V0DS
13
UPG2183T6C-E2-A 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| UPG2185T6R | NEC | SPDT SWITCH FOR 2 GHz TO 6 GHz | 获取价格 |
|
| UPG2185T6R | RENESAS | GaAs Integrated Circuit SPDT Switch for 2 GHz to 6 GHz | 获取价格 |
|
| UPG2185T6R-E2 | NEC | SPDT SWITCH FOR 2 GHz TO 6 GHz | 获取价格 |
|
| UPG2185T6R-E2 | RENESAS | GaAs Integrated Circuit SPDT Switch for 2 GHz to 6 GHz | 获取价格 |
|
| UPG2185T6R-E2-A | NEC | SPDT SWITCH FOR 2 GHz TO 6 GHz | 获取价格 |
|
| UPG2185T6R-E2-A | RENESAS | GaAs Integrated Circuit SPDT Switch for 2 GHz to 6 GHz | 获取价格 |
|
| UPG2189TB | NEC | L-BAND 4W HIGH POWER SPST SWITCH | 获取价格 |
|
| UPG2193T6E-E2-A | NEC | Diversity Switch, 915MHz Min, 2170MHz Max, 0.65dB Insertion Loss-Max, 3.50 X 3.50 MM, 0.60 MM HEIGHT, LEAD FREE, PLASTIC, TQFN-20 | 获取价格 |
|
| UPG2193T6E-E2-A | RENESAS | UPG2193T6E-E2-A | 获取价格 |
|
| UPG2214TB | NEC | NECs W LOW VOLTAGE L, S-BAND SPDT SWITCH | 获取价格 |
|
UPG2183T6C-E2-A 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 6
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 9
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
