CM2835 [CHAMP]

300mA CMOS LDO; 300毫安CMOS LDO
CM2835
型号: CM2835
厂家: CHAMPION MICROELECTRONIC CORP.    CHAMPION MICROELECTRONIC CORP.
描述:

300mA CMOS LDO
300毫安CMOS LDO

文件: 总9页 (文件大小:346K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
CM2835  
300mA CMOS LDO  
GENERAL DESCRIPTION  
FEATURES  
The CM2835 family is a positive voltage linear regulator  
developed utilizing CMOS technology featured low quiescent  
current (30μA typ.), low dropout voltage, and high output  
voltage accuracy, making them ideal for battery applications.  
EN input connected to CMOS has low bias current. The  
space-saving SOT-23 and SOT-89 package is attractive for  
“Pocket” and “Hand Held” applications.  
‹
‹
‹
‹
‹
‹
‹
‹
‹
‹
‹
‹
Very Low Dropout Voltage  
Low Current Consumption: Typ. 30μA, Max. 35μA  
Output Voltage: 1.8V, 2.5V, 3.0V, and 3.3V  
High Accuracy Output Voltage: +/- 1.5%  
Guaranteed 300mA Output  
Input Range up to 7.0V  
Thermal Shutdown  
Current Limiting  
These rugged devices have both Thermal Shutdown, and  
Current limit to prevent device failure under the “Worst” of  
operating conditions.  
Stability with Low ESR Capacitors  
Compact Package: SOT-23, SOT-89  
Factory Pre-set Output Voltages  
Low Temperature Coefficient  
The CM2835 is stable with a Low ESR output capacitance of  
1.0μF or greater.  
APPLICATIONS  
‹
‹
‹
‹
Battery-powered devices  
Personal communication devices  
Home electric/electronic appliances  
PC peripherals  
TYPICAL APPLICATIONS  
CM2835  
IN  
OUT  
IN  
OUT  
GND  
C1  
1uF  
C2  
1.0uF  
5V  
2006/10/11 Rev1.4  
Champion Microelectronic Corporation  
Page 1  
CM2835  
300mA CMOS LDO  
PIN CONFIGURATION  
SOT-23  
SOT-89  
Top View  
Top View  
3
2
1
BLOCK DIAGRAM  
IN  
OUT  
Overcurrent  
Shutdown  
R1  
Thermal  
Shutdown  
-
AMP  
+
R2  
GND  
2006/10/11 Rev1.4  
Champion Microelectronic Corporation  
Page 2  
CM2835  
300mA CMOS LDO  
ORDERING INFORMATION  
Part Number  
CM2835DIM23  
CM2835DIM89  
CM2835KIM23  
CM2835KIM89  
CM2835PIM23  
CM2835PIM89  
CM2835SIM23  
CM2835SIM89  
CM2835GDIM23  
CM2835GDIM89  
CM2835GKIM23  
CM2835GKIM89  
CM2835GNIM23  
CM2835GNIM89  
CM2835GPIM23  
CM2835GPIM89  
CM2835GSIM23  
CM2835GSIM89  
Output Voltage  
Temperature Range  
-40~ +85℃  
-40~ +85℃  
-40~ +85℃  
-40~ +85℃  
-40~ +85℃  
-40~ +85℃  
-40~ +85℃  
-40~ +85℃  
-40~ +85℃  
-40~ +85℃  
-40~ +85℃  
-40~ +85℃  
-40~ +85℃  
-40~ +85℃  
-40~ +85℃  
-40~ +85℃  
-40~ +85℃  
-40~ +85℃  
Package  
SOT-23  
SOT-89  
SOT-23  
SOT-89  
SOT-23  
SOT-89  
SOT-23  
SOT-89  
SOT-23  
SOT-89  
SOT-23  
SOT-89  
SOT-23  
SOT-89  
SOT-23  
SOT-89  
SOT-23  
SOT-89  
1.8V  
1.8V  
2.5V  
2.5V  
3.0V  
3.0V  
3.3V  
3.3V  
1.8V  
1.8V  
2.5V  
2.5V  
2.8V  
2.8V  
3.0V  
3.0V  
3.3V  
3.3V  
Note: For other pre-set output voltage requirements, please contact Champion Sales office.  
ABSOLUTE MAXIMUM RATINGS  
OPERATING RATINGS  
Input Voltage …………….……………………………. +7V  
Ambient Temperature Range (TA) ……... -40to +85℃  
Junction Temperature Range …..…..... -40to +150℃  
Output Current …………………….……  
PD / (VIN - Vo) mA  
Output Voltage …………………… GND-0.3V to VIN+0.3V  
ESD Classification ………………………………………… B  
THERMAL INFORMATION  
Parameter  
Maximum  
170  
Unit  
/W  
SOT-23  
SOT-89  
SOT-23  
SOT-89  
SOT-23  
SOT-89  
Thermal Resistance (Θjc)  
100  
330  
300  
225  
/W  
Thermal Resistance (Θja)  
Internal Power Dissipation (PD)  
(ΔT = 100)  
mW  
400  
Maximum Junction Temperature  
Maximum Lead Temperature (10 Sec)  
150  
300  
*With Junction sink capable of twice times ofΘjc  
Caution: Stress above the listed absolute rating may cause permanent damage to the device.  
2006/10/11 Rev1.4  
Champion Microelectronic Corporation  
Page 3  
CM2835  
300mA CMOS LDO  
ELECTRICAL CHARACTERISTICS  
TA = +25; unless otherwise noted  
CM2835  
Unit  
Parameter  
Symbol  
Test Conditions  
Min.  
Note 1  
-1.5  
Typ.  
Max.  
7
Input Voltage  
VIN  
V
Output Voltage Accuracy  
VOUT  
IO = 1mA to 300mA  
1.5  
%
1.2V<VO(NOM) 2.0V  
2.0V<VO(NOM) 2.5V  
1300  
400  
300  
IO = 300mA,  
Dropout Voltage  
VDROPOUT  
mV  
V
OUT=VO(NOM)-1.5%,  
2.5V<VO(NOM)  
Output Current  
Current Limit  
IO  
ILIM  
VOUT > 1.2V  
300  
300  
mA  
mA  
μA  
μA  
%
VOUT > 1.2V  
IO = 0mA  
450  
30  
Quiescent Current  
IQ  
35  
50  
0.1  
1
Ground Pin Current  
Line Regulation  
IGND  
IO = 1mA to 300mA  
IOUT=5mA, VIN=VOUT+1 to VOUT+2  
IO=1mA to 300mA  
30  
REGLINE  
REGLOAD  
OTS  
OTH  
TC  
-0.1  
0.02  
0.2  
150  
30  
Load Regulation  
%
Over Temperature Shutdown  
Over Temperature Hysteresis  
VOUT Temperature Coefficient  
40  
ppm/℃  
f=1kHz  
IO = 100mA  
60  
Power Supply Rejection  
PSRR  
PSRR  
dB  
dB  
f=10kHz  
50  
CO=2.2μF ceramic  
f=100kHz  
40  
f=1kHz  
f=10kHz  
75  
IO = 100mA  
Power Supply Rejection  
Output Voltage Noise  
CO=2.2μF ceramic  
55  
C
BYP=0.01μF  
f=100kHz  
CO=2.2μF  
CO=100μF  
CO=2.2μF  
CO=100μF  
30  
f=10Hz to 100kHz  
IO = 10mA, CBYP=0μF  
f=10Hz to 100kHz  
30  
eN  
eN  
μVrms  
μVrms  
20  
30  
Output Voltage Noise  
IO = 10mA, CBYP=0.01μF  
20  
Note 1. VIN(MIN) = VOUT + VDROPOUT  
2006/10/11 Rev1.4  
Champion Microelectronic Corporation  
Page 4  
CM2835  
300mA CMOS LDO  
DETAILED DESCRIPTION  
The CM2835 family of CMOS regulators contain a PMOS pass transistor, voltage reference, error amplifier, over-current  
protection, thermal shutdown.  
The P-channel pass transistor receives data from the error amplifier, over-current protection, and thermal protection circuits.  
During normal operation, the error amplifier compares the output voltage to a precision reference. Over-current and Thermal  
shutdown circuits become active when the junction temperature exceeds 150, or the current exceeds 300mA. During thermal  
shutdown, the output voltage remains low. Normal operation is restored when the junction temperature drops below 120.  
The CM2835 switches from voltage mode to current mode when the load exceeds the rated output current. This prevents  
over-stress.  
EXTERNAL CAPACITOR  
The CM2835 is stable with a Low ESR output capacitor to ground of 1.0μF or greater. It can keep stable even with higher ESR  
capacitors. A second capacitor is recommended between the input and ground to stabilize VIN. The input capacitor should be  
larger than 0.1μF to have a beneficial effect. All capacitors should be placed in close proximity to the pins. A “quiet” ground  
termination is desirable.  
TYPICAL CHARACTERISTICS  
2006/10/11 Rev1.4  
Champion Microelectronic Corporation  
Page 5  
CM2835  
300mA CMOS LDO  
2006/10/11 Rev1.4  
Champion Microelectronic Corporation  
Page 6  
CM2835  
300mA CMOS LDO  
PACKAGE DIMENSION  
SOT-23 (M23)  
D
3
b1  
With Plating  
A
A1  
A2  
b
b
Base Metal  
b1  
c
Section B-B  
c1  
D
E
E1  
L
1
2
e
b
L1  
e
e1  
e1  
θ
θ1  
θ2  
L
See Section B-B  
L1  
SOT-89 (M89)  
D
D1  
φ1.0  
C
e
e1  
A
L
b
b1  
C
D
D1  
H
E
e1  
e
b
b
b1  
2006/10/11 Rev1.4  
Champion Microelectronic Corporation  
Page 7  
CM2835  
300mA CMOS LDO  
NUMBERING SCHEME  
Ordering Number: CM2835XYZ (note1)  
Ordering Number: CM2835GXYZ (note2)  
note1:  
CM2835: 300mA CMOS LDO with enable  
X : Suffix for voltage output (note 3)  
Y : Suffix for Temperature Range (note 4)  
Z : Suffix for Package Type (note 5)  
note2:  
CM2835: 300mA CMOS LDO with enable  
G : Suffix for Pb Free Product  
X : Suffix for voltage output (note 3)  
Y : Suffix for Temperature Range (note 4)  
Z : Suffix for Package Type (note 5)  
note 3: see CMOS LDO Voltage Suffix Table  
CM2835 will provide options of D(1.8V), K(2.5V), P(3.0V), S(3.3V)  
note 4:  
Y= I : -40~+85(only I grade support for all CMOS LDOs)  
note 5:  
Z is single alphabet with or without digits  
M23 : SOT-23 (TR only)  
M89 : SOT-89 (TR only)  
CMOS LDO Voltage Suffix Table  
Output Voltage  
1.5V  
Suffix  
A
Output Voltage  
3.0V  
Suffix  
P
1.6V  
1.7V  
1.8V  
1.9V  
2.0V  
2.1V  
2.2V  
2.3V  
B
C
D
E
F
G
H
I
3.1V  
3.2V  
3.3V  
3.4V  
3.5V  
3.6V  
3.7V  
3.8V  
3.9V  
4.0V  
Q
R
S
T
U
V
W
X
Y
Z
2.4V  
2.5V  
2.6V  
J
K
L
2.7V  
2.8V  
2.9V  
M
N
O
2006/10/11 Rev1.4  
Champion Microelectronic Corporation  
Page 8  
CM2835  
300mA CMOS LDO  
IMPORTANT NOTICE  
Champion Microelectronic Corporation (CMC) reserves the right to make changes to its products or to discontinue any integrated  
circuit product or service without notice, and advises its customers to obtain the latest version of relevant information to verify,  
before placing orders, that the information being relied on is current.  
A few applications using integrated circuit products may involve potential risks of death, personal injury, or severe property or  
environmental damage. CMC integrated circuit products are not designed, intended, authorized, or warranted to be suitable for  
use in life-support applications, devices or systems or other critical applications. Use of CMC products in such applications is  
understood to be fully at the risk of the customer. In order to minimize risks associated with the customer’s applications, the  
customer should provide adequate design and operating safeguards.  
HsinChu Headquarter  
Sales & Marketing  
5F, No. 11, Park Avenue II,  
Science-Based Industrial Park,  
HsinChu City, Taiwan  
7F-6, No.32, Sec. 1, Chenggong Rd., Nangang  
District, Taipei City 115, Taiwan  
TEL: +886-3-567 9979  
FAX: +886-3-567 9909  
TEL: +886-2-2788 0558  
FAX: +886-2-2788 2985  
2006/10/11 Rev1.4  
Champion Microelectronic Corporation  
Page 9  

相关型号:

CM2835DIM23

300mA CMOS LDO
CHAMP

CM2835DIM89

300mA CMOS LDO
CHAMP

CM2835GDIM23

300mA CMOS LDO
CHAMP

CM2835GDIM89

300mA CMOS LDO
CHAMP

CM2835GKIM23

300mA CMOS LDO
CHAMP

CM2835GKIM89

300mA CMOS LDO
CHAMP

CM2835GNIM23

300mA CMOS LDO
CHAMP

CM2835GNIM89

300mA CMOS LDO
CHAMP

CM2835GPIM23

300mA CMOS LDO
CHAMP

CM2835GPIM89

300mA CMOS LDO
CHAMP

CM2835GSIM23

300mA CMOS LDO
CHAMP

CM2835GSIM89

300mA CMOS LDO
CHAMP