4PS560MH11-E [CHEMI-CON]
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 4V, 20% +Tol, 20% -Tol, 560uF, Through Hole Mount, RADIAL LEADED;型号: | 4PS560MH11-E |
厂家: | UNITED CHEMI-CON, INC. |
描述: | Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 4V, 20% +Tol, 20% -Tol, 560uF, Through Hole Mount, RADIAL LEADED |
文件: | 总3页 (文件大小:103K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UPGRADE
Engineering Bulletin Jul 03
PSSeries
ꢀ
Solid Functional
Polymer
Aluminum
ꢀ
Radial Lead
ꢀ
Ultra Low ESR
ꢀ
Lead-Free
Construction
ꢀ
Solvent Proof
Actual
Size
ꢀ
ꢁ
105ꢂC Max.
Temperature
The PS series is a radial lead miniature series of aluminum capacitors that uses a solid functional
polymer as the electrolyte. This durable solid capacitor design allows more stable performance and
higher reliability over the expected lifetime than normal liquid electrolyte capacitors. The PS series
features large capacitance, ultra low ESR, high ripple current capability, and lead-free construction
that can withstand the harsh environment of lead-free alloy soldering. The PS capacitors are suitable
for DC-DC converters, voltage regulators, and decoupling applications for computer motherboards.
The PS series has been upgraded to include new 20 and 25 volt models which are recommended as
cost-effective replacements for OS-CONTM capacitors.
The PS series capacitors are solvent proof. Refer to the Mini-Glossary for cleaning guidelines and
recommended cleaning agents that are compatible with United Chemi-Con products.
Summary of Specifications
Radial lead terminals.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Capacitance range: 68 to1,500µF.
Voltage range: 2.5 to 25VDC.
ꢃ
ꢁ
Category temperature range: 55ꢂC to 105ꢂC.
ꢁ
Leakage current: 0.2CV maximum after 2 minutes at 20ꢂC.
ꢄ
Standard capacitance tolerance: 20%
Nominal case size (DꢅL): 8ꢅ11.5mm and10ꢅ12.5mm.
ꢁ
Rated lifetime: 2,000 hours at 105ꢂC.
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
1/3
Engineering Bulletin Jul 03
PS Series
PS Specifications
Item
Characteristics
ꢃ
ꢁ
55 to 105ꢂC
Category Temperature Range
Rated Voltage Range
Capacitance Range
Capacitance Tolerance
Leakage Current
2.5 to 25VDC
68 to1,500ꢀF
ꢄ
ꢁ
20% (M) at 20ꢂC, 120Hz
ꢁ
I ꢆ 0.2CV maximum after 2 minutes at 20ꢂC. To verify maximum leakage current, apply the
ꢁ
DC rated voltage to the capacitors for120 minutes at 105ꢂC before measurement.
Where I=Max. leakage current (ꢀA), C=Nominal capacitance (ꢀF) and V=Rated voltage (V)
ꢁ
0.12 maximum at 20ꢂC, 120Hz
Dissipation Factor (Tan ꢁ)
ꢃ
ꢃ
ꢁ
Low Temperature
Characteristics
At 100kHz, impedance (Z) ratio between the 25ꢂC or 55ꢂC value and 20ꢂC value shall
not exceed the values given below.
Rated Voltage (V)
2.5-25
≤ 1.15
≤ 1.25
ꢃ
ꢁ
Z( 25ꢂC) /Z( 20ꢂC)
ꢃ
ꢁ
Z( 55ꢂC) /Z( 20ꢂC)
ꢁ
The following specifications shall be satisfied when the capacitors are restored to 20ꢂC after
Endurance
(Load Life)
ꢁ
subjecting them to the DC rated voltage for 2,000 hours at 105ꢂC.
Appearance : no significant damage
Capacitance change: ≤ 20% of the initial measured value
ꢄ
Tan ꢁ (DF)
ESR
Leakage current
: ≤ 150% of the initial specified value
: ≤ 150% of the initial specified value
: ≤ initial specified value
ꢁ
The following specifications shall be satisfied when the capacitors are restored to 20ꢂC after
Bias HumidityTest
Surge VoltageTest
ꢁ
subjecting them to the DC rated voltage for 500 hours at 60ꢂC, 90-95%RH.
Appearance : no significant damage
Capacitance change: ≤ 20% of the initial measured value
ꢄ
Tan ꢁ (DF)
ESR
Leakage current
: ≤ 150% of the initial specified value
: ≤ 150% of the initial specified value
: ≤ initial specified value
ꢁ
The following specifications shall be satisfied when the capacitors are restored to 20ꢂC after
ꢁ
the surge voltage at 105ꢂC is applied through a protective resistor of 1,000 ohms at a cycling
of 30 seconds on, 5.5 minutes off for1,000 cycles. The surge voltage shall not exceed115%
of the rated voltage.
Appearance
: no significant damage
ꢄ
Capacitance change: ≤ 20% of the initial measured value
Tan ꢁ (DF)
ESR
Leakage current
: ≤ 150% of the initial specified value
: ≤ 150% of the initial specified value
: ≤ initial specified value
ꢁ
1% maximum per1,000 hours at 105ꢂC with rated voltage applied. (Confidence level 60%)
Failure Rate
Part Numbering System for PS Series When ordering, always specify complete catalog number for PS Series.
PS 560 H11 T15
4
M
Lead Code: T15 = Ø8 (F= 3.5mm) in Tape & Ammo Pack Box.
T14 = Ø10 (F= 5.0mm) in Tape & Ammo Pack Box.
E = Optional 5mm Short Leads in Bulk.
Blank = Standard Lead Length in Bulk.
Case Code: See Case Sizes in Tables.
Design Code: Use only if design change code number is assigned
by the factory. Ask United Chemi-Con for details.
ꢄ
Capacitance Tolerance: M = 20%
Capacitance Value: Expressed in Microfarads. An R indicates a
decimal point (e.g. 2R2= 2.2ꢀF).
Series Name: Indicates Basic Capacitor Design.
DC Rated Voltage: Expressed in Volts (e.g. 4 = 4WVDC).
Note: Prefix code 6 = 6.3WVDC; 2R5 = 2.5WVDC.
2/3
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
Engineering Bulletin Jul 03
PS Series
Diagram of Dimensions
Unit: mm
Radial Lead
Marking Example: 4V, 560µF
Resin Coated Can
d
PS197
560
4V
D
'
D
F
L
L
15 MIN.
4 MIN.
'
Refer to Packaging section for Miniature
taping and ammo box specifications and
Lead Configurations section for Miniature
radial lead cut and lead forming options.
ꢄ
F 0.5
3.5
5.0
Case Code
ØD
Ø8
L
11.5
12.5
ØD max.
ꢁ
ØD 0.5
ꢁ
ØD 0.5
L max.
Ød
0.6
0.6
'
'
ꢁ
H11
J12
L
L
1.5
1.5
ꢁ
Ø10
Standard Voltage Ratings - Radial Lead
Rated
Rated
Voltage
(WVDC)
Nominal
Case Size*
DꢅL (mm)
Maximum ESR
Capacitance
(µF)
Catalog
Part Number
Case
Code
Ripple Current
(mA rms) at
ꢁ
(mΩ) at 20ꢂC
100k-300kHz
ꢁ
105ꢂC,100kHz
680
2R5PS680MH11
2R5PS1500MJ12
8 ꢅ 11.5
H11
J12
10
8
5,230
5,500
2.5 Volts
2.9 Volts Surge
1,500
10 ꢅ 12.5
560
820
4PS560MH11
4PS820MJ12
8 ꢅ 11.5
H11
J12
10
8
5,230
5,500
4 Volts
4.6 Volts Surge
10 ꢅ 12.5
390
680
6PS390MH11
6PS680MJ12
8 ꢅ 11.5
H11
J12
12
10
4,770
5,500
6.3 Volts
7.2 Volts Surge
10 ꢅ 12.5
270
470
10PS270MH11
10PS470MJ12
8 ꢅ 11.5
H11
J12
14
12
4,420
5,300
10 Volts
11.5 Volts Surge
10 ꢅ 12.5
180
330
16PS180MH11
16PS330MJ12
8 ꢅ 11.5
H11
J12
16
14
4,360
5,050
16 Volts
18.4 Volts Surge
10 ꢅ 12.5
100
150
20PS100MH11
20PS150MJ12
8 ꢅ 11.5
H11
J12
24
20
3,320
4,320
20 Volts
23 Volts Surge
10 ꢅ 12.5
68
25PS68MH11
25PS100MJ12
8 ꢅ 11.5
H11
J12
24
20
3,320
4,320
25 Volts
28.7 Volts Surge
100
10 ꢅ 12.5
Refer to diagram for detailed case sizes.
*
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com
3/3
相关型号:
©2020 ICPDF网 联系我们和版权申明