APS-160ESS331MJC5S [CHEMI-CON]

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS; 导电性高分子固体铝电解电容器
APS-160ESS331MJC5S
型号: APS-160ESS331MJC5S
厂家: UNITED CHEMI-CON, INC.    UNITED CHEMI-CON, INC.
描述:

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
导电性高分子固体铝电解电容器

电容器 铝电解电容器
文件: 总2页 (文件大小:36K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS  
Radial Lead  
@Super low ESR, high temperature resistance  
@Large capacitance & Improved high ripple current capability  
@Rated voltage range : 2.5 to 25Vdc  
@2000 hours at 105C  
@Suitable for DC-DC converters, voltage regulators and decoupling applications  
For computer motherboards  
@Pb-free design  
SPECIFICATIONS  
?
Items  
Characteristics  
Category  
Temperature Range  
-55 to +105C  
Rated Voltage Range 2.5 to 25Vdc  
Capacitance Tolerance P20% (M)  
(at 20C, 120Hz)  
(at 105C)  
Surge Voltage  
Leakage Current  
*Note  
Rated voltageB1.15V  
I=0.2CV (max.)  
Where, I : Leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (Vdc)  
(at 20C after 2 minutes)  
(at 20C, 120Hz)  
Dissipation Factor  
(tane)  
0.12 max.  
Low Temperature  
Characteristics  
Max. impedance ratio at 100kHz to the 20C value  
Z(-25C)/Z(+20C)[1.15  
Z(-55C)/Z(+20C)[1.25  
Endurance  
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours  
at 105C.  
Appearance  
Capacitance change  
D.F. (tanE)  
No significant damage  
[P20% of the initial measured value  
[150% of the initial specified value  
[150% of the initial specified value  
[The initial specified value  
ESR  
Leakage current  
Bias Humidity Test The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C,  
90 to 95% RH for 500 hours.  
Appearance  
Capacitance change  
D.F. (tanE)  
No significant damage  
[P20% of the initial measured value  
[150% of the initial specified value  
[150% of the initial specified value  
[The initial specified value  
ESR  
Leakage current  
Surge Voltage Test The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds  
through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds.  
Appearance  
Capacitance change  
D.F. (tanE)  
No significant damage  
[P20% of the initial measured value  
[150% of the initial specified value  
[150% of the initial specified value  
[The initial specified value  
ESR  
Leakage current  
Failure Rate  
1% per 1000 hours maximum (Confidence level 60% at 105C)  
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.  
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C.  
DIMENSIONS [mm]  
MARKING  
?
?
@Terminal Code : E  
EX) 4V820MF  
Coated Case  
PS18M  
820  
4V  
fD  
L
8
11.5  
3.5  
10  
12.5  
5.0  
F
L+1.5 max.  
15min.  
4min.  
(1/2)  
CAT. No. E1001E  
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS  
Radial Lead  
PART NUMBERING SYSTEM  
?
1
2
3
4
5
6
7
8
9
10  
11 12 13  
14  
15 16 17  
18  
-
A P S  
A A A E A A A A A M A A A S  
Supplement code  
Size code  
Capacitance tolerance code  
Capacitance code (ex. 270MF:271,1500MF:152)  
Lead forming·Taping code  
Terminal code  
Voltage code (ex. 4V:4R0,6.3V:6R3,10V:100)  
Series code  
Category  
Please refer to "A guide to global code (conductive polymer type)"  
STANDARD RATINGS  
?
Case size  
ESR  
Rated ripple current  
WV(Vdc)  
Cap(µF)  
Part No.  
fDbL(mm)  
(momax/20c, 100k to 300kHz)  
(mArms/105c, 100kHz)  
680  
1500  
560  
820  
390  
680  
270  
470  
180  
330  
100  
150  
68  
8B11.5  
10B12.5  
8B11.5  
10B12.5  
8B11.5  
10B12.5  
8B11.5  
10B12.5  
8B11.5  
10B12.5  
8B11.5  
10B12.5  
8B11.5  
10B12.5  
10  
8
5230  
5500  
5230  
5500  
4770  
5500  
4420  
5300  
4360  
5050  
3320  
4320  
3320  
4320  
APS-2R5ESS681MHB5S  
APS-2R5ESS152MJC5S  
APS-4R0ESS561MHB5S  
APS-4R0ESS821MJC5S  
APS-6R3ESS391MHB5S  
APS-6R3ESS681MJC5S  
APS-100ESS271MHB5S  
APS-100ESS471MJC5S  
APS-160ESS181MHB5S  
APS-160ESS331MJC5S  
APS-200ESS101MHB5S  
APS-200ESS151MJC5S  
APS-250ESS680MHB5S  
APS-250ESS101MJC5S  
2.5  
4
10  
8
12  
10  
14  
12  
16  
14  
24  
20  
24  
20  
6.3  
10  
16  
20  
25  
100  
: Lead forming code and taping code  
SS  
(2/2)  
CAT. No. E1001E  

相关型号:

APS-160ETD181MHB5S

Aluminum Electrolytic Capacitor, Polarized, Aluminum, 16V, 20% +Tol, 20% -Tol, 180uF
CHEMI-CON

APS-160ETD331MJC5S

Aluminum Electrolytic Capacitor, Polarized, Aluminum, 16V, 20% +Tol, 20% -Tol, 330uF
CHEMI-CON

APS-16D25-11-DF8-TR8

Ambient light sensing
EVERLIGHT

APS-200ESS101MHB5S

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CHEMI-CON

APS-200ESS151MJC5S

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CHEMI-CON

APS-250ESS101MJC5S

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CHEMI-CON

APS-250ESS680MHB5S

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CHEMI-CON

APS-2R5ELL152MJC5S

Aluminum Electrolytic Capacitor, Polarized, Aluminum, 2.5V, 20% +Tol, 20% -Tol, 1500uF
CHEMI-CON

APS-2R5ESS152MJC5S

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CHEMI-CON

APS-2R5ESS681MHB5S

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
CHEMI-CON

APS-306-G-A

IC Socket, DIP6, 6 Contact(s),
SAMTEC

APS-306-G-A1

IC Socket, DIP6, 6 Contact(s),
SAMTEC