CL-L104-HC6L2-F5 [CITIZEN]
This data sheet is applied to the chip type LED lamp;
| 型号： | CL-L104-HC6L2-F5 |
| 厂家： | 
CITIZEN ELECTRONICS CO., LTD. |
| 描述： | This data sheet is applied to the chip type LED lamp 光电 |
| 文件： | 总12页 (文件大小：244K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATA SHEET
CL-L104-HC6L2-F5
andꢀ
are trademarks or registered trademarks of CITIZEN HOLDINGS CO., LTD. JAPAN.
is a trademark or a registered trademark of CITIZEN ELECTRONICS CO., LTD. JAPAN.
Ref.CE-P2397 03/13 R1(0613)
1/11
DATA SHEET
1. Scope of Application
This data sheet is applied to the chip type LED lamp , model CL-L104-HC6L2-F5.
2. Part code
C L - L 1 0 4 - H C 6 L 2 - F 5
Series
L104 : White power LED for general lighting.
Special specifications
H : General Color Rendering Index Min.90 type.
Watt class
C6 : 6 watt package.
Lighting color
L2 : Compliance with ANSI C78.377-2008,
3-Step MacAdam ellipse,
ꢀꢀ ꢀꢀCorrelated Color Temperature 2700K.
CITILED
CL-L104-HC6L2-F5
Symbol
Name
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2397 03/13 R1(0613)
2/11
DATA SHEET
3. Outline drawing
Cathode
CathodeMark(Gray)
Resin
Anode
Marking2
Marking1
Tc measuring-point(Board side)
Unit : mm
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
Tolerances unless otherwise specified : ±0.3
<Marking1>
Emitting area (including white resin)
First line : Serial No.
Second line :
Protection Device
Hꢀ6ꢀL2ꢀF5
Color e.g. L2
Watt e.g. 6 : 6W
<Marking2>
Ra
e.g. H : Min.90
First line :
ＣＥＪꢀL104
Model number
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Second line :
Anode
×12
Cathode
9.2ꢀ700ꢀ120
Maximum junction temperture Tj=120C
Rated supply current 700mA
Rated supply voltage 9.2V
It has a protection device built in as a protection circuit against static electricity.
4. Performance
( 1 ) Absolute Maximum Rating
Parameter
Rating Value
15.7
Symbol
PD
Unit
W
Power Dissipation
Forward Current
1,440
IF
mA
mA
mA
C
60
IF Min
IR
Mnimum current
1
Reverse Current
-30 ~ +85
-40 ~ +100
120
TOP
Operating Temperature
Storage Temperature
Junction Temperature
TST
C
Tj Max
C
*1
*1 D.C. Current : Tj = Tc + Rj-c × PD
CITILED
Symbol
Name
CL-L104-HC6L2-F5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2397 03/13 R1(0613)
3/11
DATA SHEET
( 2 ) Electro-optical Characteristics
( Tc=25 C )
Parameter
Forward Voltage
Condition
IF=700mA
Symbol
VF
Min.
8.1
Typ.
9.2
Max.
9.9
Unit
V
IF=700mA
IF=700mA
Luminous Flux
General Color
Φv
400
90
500
-
-
-
lm
-
Ra
Junction-case
Thermal Resistance
Rj-c
-
5.0
-
C/W
Chromaticity coordinates ( Condition : IF=700mA ,Tc=25 C )
Color rank
Center
Referenceꢀ(ANSI C78.377)
Color rank
Center
x
y
x
y
0.4578
0.4101
0.4578
0.4813
0.4562
0.4373
0.4593
0.4101
0.4319
0.4260
0.3893
0.3944
(2725K)
Oval parameter
a
b
c
L2
L2
a
b
θ°
0.00774
0.00411
57.28
d
*Color region stay within MacAdam "3-step" ellipse from the chromaticity center.
*The chromaticity center refers to ANSI C78.377:2008.
Please refer to ANSI C78.377 for the chromaticity center.
*θ is the angle between the major axis of the ellipse and the x-axis,
ꢀ and a and b are the major and minor semi-axes of an ellipse. (Ref. IEC 60081:1997 AnnexD)
x-y chart-CIE1931
0.44
2900K
2700K
2500K
0.43
0.42
0.41
0.40
0.39
0.38
0
0
Color region
Color region
(ANSI)
2800K
0.44
2600K
0.43
0.45
0.46
x
0.47
0.48
0.49
Note: The tolerance of measurement at our tester is VF±3% , Φv±10% , Chromaticity(x,y)±0.01.
CITILED
Symbol
Name
CL-L104-HC6L2-F5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2397 03/13 R1(0613)
4/11
DATA SHEET
5. Characteristics
・Forward Current vs. Forward Voltage
・Forward Current vs. Relative Luminous Flux
Tc=25C
Tc=25C
10.5
10.0
9.5
200%
180%
160%
140%
120%
100%
80%
9.0
8.5
60%
40%
8.0
20%
7.5
0%
0
200 400 600 800 1000 1200 1400
IF [mA]
0
200 400 600 800 1000 1200 1400
IF [mA]
・Forward Current vs. Chromaticity Coordinate
・Case Temperature vs. Chromaticity Coordinate
IF=700mA
Tc=25C
0.020
0.020
Δx
Δx
0.015
0.015
Δy
Δy
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
0
200 400 600 800 1000 1200 1400
IF [mA]
0
20
40
60
80
100
Tc [C]
CITILED
CL-L104-HC6L2-F5
Symbol
Name
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2397 03/13 R1(0613)
5/11
DATA SHEET
・Case Temperature vs. Forward Voltage
・Case Temperature vs. Relative Luminous Flux
IF=700mA
IF=700mA
120%
10.0
9.5
9.0
8.5
8.0
7.5
100%
80%
60%
40%
20%
0%
0
20
40
60
80
100
0
20
40
60
80
100
Tc [C]
Tc [C]
・Case Temperature vs. Allowable Forward Current
・Spectrum
Tc=25C IF=700mA
120%
100%
80%
60%
40%
20%
0%
1600
1400
1200
1000
800
600
400
200
0
0
25
50
75
100
125
350
450
550
650
750
850
Tc [C]
λ [nm]
CITILED
CL-L104-HC6L2-F5
Symbol
Name
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2397 03/13 R1(0613)
6/11
DATA SHEET
6. Reliability
(1) Details of the tests
Test Item
Test Condition
Ta=-30 C, IF=700 mA× 1000 hours(with Al-fin)
Ta=60 C, IF=700 mA× 1000 hours(with Al-fin)
Ta=85 C, IF=700 mA× 1000 hours(with Al-fin)
-40 C × 1000 hours
Continuous Operation Test
Low Temperature Storage Test
High Temperature Storage Test
Moisture-proof Test
100 C × 1000 hours
60 C, 90 %RH for 1000 hours
Thermal Shock Test
-40 C × 30 minutes – 100 C × 30 minutes, 100 cycle
(2) Judgment Criteria of Failure for Reliability Test
(Ta=25 C)
Measuring Condition
Measuring Item
Judgment Criteria for Failure
Symbol
VF
Forward Voltage
IF=700mA
IF=700mA
> U × 1.1
< S × 0.85
Total Luminous Flux
Φv
U defines the upper limit of the specified characteristics. S defines the initial value.
Note: Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be
returned to the normal ambient conditions after the completion of each test.
CITILED
Symbol
Name
CL-L104-HC6L2-F5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2397 03/13 R1(0613)
7/11
DATA SHEET
7. Packing Specifications
(1) Packing
An empty tray is placed on top of a five-tier tray which contain 50 pieces each. The set of six
trays is banded together with two rubber bands.
(Smallest packing unit: 250 pieces)
A label with product name, quantity, lot number is placed on the upper empty tray.
Tray (Dimensions: 310 × 210 × 11mm / Materials: Electrically conductive PS)
< Packing figure >
Product 50pcs/tray
< Example of indication label >
1. TYPE
CL-L104-HC6L2-F5
e.g. xxx
CUSTOMER
2. P.No. (Cutomer's P/N)
3. Lot No.
e.g. 132 001
※
TYPE
P.NO
CL-L104-HC6L2-F5
xxx
---(1)
---(2)
---(3)
---(4)
- First letter: Last digit of the year
- Second letter: Production month
e.g. 13 : year 2013
ꢀ
e.g. 2 : Feb
ꢀ
LOT No 132 001
※
Q'ty
250 pcs.
Note: October, November and December are designated
by X, Y and Z, respectively.
PASS
- Third letter: Control LOT including factory number
CITIZEN ELECTRONICS
e.g. 001
※
4. Quantity
e.g. 250 pieces
ꢀ
CITILED
CL-L104-HC6L2-F5
Symbol
Name
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2397 03/13 R1(0613)
8/11
DATA SHEET
8．Precautions
(1) 1. Handling with care for this product
-Both the light emitting area and white dam over the light emitting area is composed of resin materials.
Please avoid the resin area from being pressed, stressed, rubbed, come into contact with sharp metal nail
(e.g. edge of reflector part) because the function, performance and reliability of this product
are negatively impacted.
-Please be aware that this product should not come into contact with any other parts
while incorporating in your lighting apparatus or your other products.
(2) Countermeasure against static electricity
-Handling of this product needs countermeasures against static electricity
because this is a semiconductor product.
-Please take adequate measures to prevent any static electricity being produced
such as the wearing of a wristband or anti-static gloves when handling this product.
-Every manufacturing facility in regard to the product (plant, equipment, machine, carrier machine
and conveyance unit) should be connected to ground and please avoid the product to be electric-charged.
-ESD sensitivity of this product is over 1000V (HBM, based on JEITA ED-4701/304).
-After assembling the LEDs into your final product(s), it is recommended to check
whether the assembled LEDs are damaged by static electricity (electrical leak phenomenon) or not.
-It is easy to find static damaged LED dies by a light-on test with the minimum current value.
(3) Caution of product assembly
-Regarding this product assembling on the heat sink, it is recommended to use M3 screw.
It might be good for screw tightening on the heat sink to do temporary tightening and final tightening.
In addition, please don’t press with excess stress on the product.
-The condition of the product assembling on the heat sink and the control of screw tightening torque
needs to be optimized according to the specification of the heat sink.
-Roughness, unevenness and burr of surface negatively impact thermal bonding
between the product and heat sink and increase heat thermal resistance between them.
Confidence of thermally and mechanical coupling between the product and heat sink are confirmed
by checking the mounting surface and measuring the case temperature of the product.
-In order to reduce the thermal resistance at assembly, it might be good to use
TIM (Thermal Interface Material) on whole contact surface of the product.
In case of using thermal grease for the TIM, it might be good to apply uniformly
on the contact surface of the product. In case of using thermal sheet for the TIM,
it might be good to make sure that the product is NOT strained by stress
when the screws are tightened for assembly.
Symbol
Name
CITILED
CL-L104-HC6L2-F5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2397 03/13 R1(0613)
9/11
DATA SHEET
8. Precautions (continued)
(4) Thermal Design
-The thermal design to draw heat away from the LED junction is most critical parameter
for an LED illumination system. High operating temperatures at the LED junction adversely affect
the performance of LED’s light output and lifetime. Therefore the LED junction temperature should
not exceed the absolute maximum rating in LED illumination system.
-The LED junction temperature while operation of LED illumination system depends upon
thermal resistance of internal LED package (Rj-c), outer thermal resistances of LED package,
power loss and ambient temperature. Please take both of the thermal design specifications
and ambient temperature conditions into consideration for the setting of driving conditions.
-For more information, please refer to application note "Thermal Management".
(5) Driving Current
-A constant current is recommended as an applying driving current to this product.
In the case of constant voltage driving, please connect current-limiting resistor to each products in series
and control the driving current to keep under the absolute maximum rating forward current value.
-Electrical transient might apply excess voltage, excess current and reverse voltage to the product(s).
They also affect negative impact on the product(s) therefore please make sure that no excess voltage,
excess current and reverse voltage is applied to the product(s)
when the LED driver is turn-on and/or turn-off.
-For more information, please refer to application note "Driving".
(6) Lighting at a minimum current value
-In a case where the minimum current(IF min) is applied to the product,
some of LED dice in the product might look different in their brightness
due to the individual difference of the LED dice, and they are not failed.
(7) Electrical Safety
-This product is designed and produced according to IEC 62031:2008
(IEC 62031:2008 LED modules for general lighting. Safety specification)
-Dielectric voltage withstand test has been conducted on this product to see any failure
after applying voltage between active pads and aluminum section of the product,
and to pass at least 500V.
-Considering conformity assessment for IEC62031:2008, almost all items of the specification
depend upon your final product of LED illumination system.
Therefore, please confirm with your final product for electrical safety of your product.
As well, the products comply with the criteria of IEC62031:2008 as single LED package.
Symbol
Name
CITILED
CL-L104-HC6L2-F5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2397 03/13 R1(0613)
10/11
DATA SHEET
8. Precautions (continued)
(8) Recommended soldering Condition (This product is not adaptable to reflow process.)
-For manual soldering
Please use lead-free soldering.
Soldering shall be implemented using a soldering bit at a temperature lower than 350C,
and shall be finished within 3.5 seconds for one land.
No external force shall be applied to resin part while soldering is implemented.
Next process of soldering should be carried out after the product has return to ambient temperature.
-For soldering correction
Regarding soldering correction, above conditions shall be applied.
Contacts number of soldering bit should be within twice for each terminal as a correction.
* Citizen Electronics cannot guarantee if usage exceeds these recommended conditions.
Please use it after sufficient verification is carried out on your own risk if absolutely necessary.
(9) Eye Safety
-The International Electrical Commission (IEC) published in 2006 IEC 62471
”2006 Photobiological safety of lamps and lamp systems ” which includes LEDs within its scope.
-When sorting single LEDs according to IEC 62471, almost all white LEDs can be classified
as belonging to either Exempt Group (no hazard) or Risk Group 1 (low risk).
-However, Optical characteristics of LEDs such as radiant flux,
spectrum and light distribution are factors that affect the risk group determination of the LED,
and especially a high-power LED, that emits light containing blue wavelengths,
might have properties equivalent to those of Risk Group 2 (moderate risk).
-Great care should be taken when directly viewing an LED that is driven at high current,
has multiple uses as a module or when focusing the light with optical instruments,
as these actions might greatly increase the hazard to your eyes.
-It is recommended to regard the evaluation of stand-alone LED packages as a reference
and to evaluate your final product.
(10) This product is not designed for usage under the following conditions.
If the product might be used under the following conditions, you shall evaluate its effect
and appropriate them. In places where the product might:
-directly and indirectly get wet due to rain and/or at place with the fear.
-be damage by seawater and/or at place with the fear
-be exposed to corrosive gas (such as Cl2, H2S, NH3, SOx, NOx and so on) and/or at place with the fear.
-be exposed to dust, fluid or oil and/or at place with the fear.
Symbol
Name
CITILED
CL-L104-HC6L2-F5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2397 03/13 R1(0613)
11/11
DATA SHEET
9. Precautions with regard to product use
(1) This document is provided for reference purposes only so that CITIZEN ELECTRONICS'
products are used as intended. CITIZEN ELECTRONICS neither makes warranties or
representations with respect to the accuracy or completeness of the information contained
in this document nor grants any license to any intellectual property rights or any other
rights of CITIZEN ELECTRONICS or any third party with respect to the information
in this document.
(2) All information included in this document such as product data, diagrams, charts,
is current as of the date this document is issued.
Such information, however, is subject to change without any prior notice.
Before purchasing or using any CITIZEN ELECTRONICS' products listed in this document,
please confirm the latest product information with a CITIZEN ELECTRONICS' sales office,
and formal specifications must be exchanged and signed by both parties prior to mass production.
(3) CITIZEN ELECTRONICS has used reasonable care in compiling the information
included in this document,
but CITIZEN ELECTRONICS assumes no liability whatsoever for any damages incurred as
a result of errors or omissions in the information included in this document.
(4) Absent ａwritten signed agreement, except as provided in the relevant terms and conditions of
sale for product, and to the maximum extent allowable by law, CITIZEN ELECTRONICS
assumes no liability whatsoever, including without limitation, indirect, consequential, special,
or incidental damages or loss, including without limitation, loss of profits, loss of opportunities,
business interruption and loss of data, and disclaims any and all express or implied warranties
and conditions related to sale, use of product, or information, including warranties
or conditions of merchantability, fitness for a particular purpose, accuracy of information,
or no infringement.
(5) Though CITIZEN ELECTRONICS works continually to improve products' quality and reliability,
products can malfunction or fail. Customers are responsible for complying with safety standards
and for providing adequate designs and safeguards to minimize risk and avoid situations
in which a malfunction or failure of a product could cause loss of human life,
bodily injury or damage to property, including data loss or corruption.
In addition, customers are also responsible for determining the appropriateness of
use of any information contained in this document such as application cases not only with
evaluating by their own but also by the entire system.
CITIZEN ELECTRONICS assumes no liability for customers' product design or applications.
(6) Please contact CITIZEN ELECTRONICS' sales office if you have any questions regarding
the information contained in this document, or if you have any other inquiries.
CITIZEN Micro HumanTech is a registered trademark of Citizen Holding Co., Japan.
CITILED is a registered trademark of CITIZEN ELECTRONICS CO., LTD. Japan
Symbol
Name
CITILED
CL-L104-HC6L2-F5
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2397 03/13 R1(0613)
相关型号：
©2020 ICPDF网 联系我们和版权申明