CLL040-1818A5-273H1A7 [CITIZEN]
Applied to the LED package; 施加到LED封装
| 型号： | CLL040-1818A5-273H1A7 |
| 厂家： | 
CITIZEN ELECTRONICS CO., LTD. |
| 描述： | Applied to the LED package |
| 文件： | 总12页 (文件大小：2973K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATA SHEET
CLL040-1818A5-273H1A7
and
are trademarks or registered trademarks of CITIZEN HOLDINGS CO., LTD. JAPAN.
is a trademark or a registered trademark of CITIZEN ELECTRONICS CO., LTD. JAPAN.
Ref.CE-P2119 05/12
1/11
DATA SHEET
1. Scope of Application
This data sheet is applied to the LED package, model CLL040-1818A5-273H1A7.
2. Part code
CLL 040 - 18 18 A5 - 27 3 H1 A7
[1]
[2] [3]
[4] [5] [6]
[1] Part Code
[2] Dies in series quantity
[3] Dies in parallel quantity
18
18
[4] Correlated color temperature 2700K
[5] Chromaticity range
[6] CRI
90min.
< Features >
- External Dimensions 28.0 x 28.0 x 1.4
- Internal StructurAluminum Base Chip on Board
- Connection to Heat SinkBy M3 screw (Recommended)
-Luminous Flux: 4565 lm @ 1080 mA
-CCT: 2700K (ANSI C78.377 Compliant, in 3-Step MacAdam Ellipse)
-CRI: 90min.
-Thermal Resistance: 0.4 C/W
- RoHS Compliant
Symbol
Name
CITIZEN ELECTRONICS CO.,LTD. JAPAN
CITILED
CLL040-1818A5-273H1A7
Ref.CE-P2119 05/12
2/11
DATA SHEET
Protection device
3. Outline drawing - Marking
Unit : mm
×18
Tolerances unless otherwise specified : +/-0.3
×18
×18
×18
×18
×18
×18
×18
×18
×18
×18
×18
×18
×18
×18
×18
×18
×18
Marking 1
Anode
Cathode
Anode
Cathode
(Tc Measurement Point)
Marking 2
Emitting area (including white resin)
Marking 1 : Serial No.
Marking 2 : 18 18 27 H1
CRI
CCT
Dies in parallel quantity
Dies in series quantity
4. Performance
(1) Absolute Maximum Rating
Parameter
Symbol
Rating Value
Unit
Input Power
Forward Current
Mnimum current
144.9
2160
90
*1
*1
Pi
IF
IF min
IR
Top
Tst
W
mA
mA
mA
C
Reverse Current
1
-30 ~ +85
-40 ~ +100
Operating Temperature
Storage Temperature
Case Temperature
Junction Temperature
C
100
150
*2
*3
Tc
Tj
C
C
*1 Input power and forward current are the values when the LED is used within the range of
the derating curve in this data sheet.
*2 Refer to 3. Outline drawing for Tc measurement point
*3 D.C. Current : Tj = Tc + Rj-c X Pi
Symbol
Name
CITILED
CLL040-1818A5-273H1A7
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2119 05/12
3/11
DATA SHEET
Tc=25C
Unit
V
lm
-
(2) Electro-optical Characteristics
Parameter
Forward Voltage
Symbol
VF
Condition
Min.
50.4
3880
90
Typ.
54.4
4565
-
Max.
59.9
-
-
-
IF=1080mA
Luminous Flux
Φv
Ra
Rj-c
IF=1080mA
IF=1080mA
Junction-Case
CRI
Thermal Resistance
-
0.4
C/W
Chromaticity coordinates ( Condition : IF=1080mA, Tc = 25C）
Center
Reference (ANSI C78.377)
x
x
y
y
0.4578
0.4101
Center 0.4578 0.4101
Oval parameter
a
b
c
0.4813 0.4319
0.4562 0.4260
0.4373 0.3893
0.4593 0.3944
2700K
a
b
0.00774
0.00411
57.28
θ°
d
*Color region stay within MacAdam "3-step" ellipse from the chromaticity center.
*The chromaticity center refers to ANSI C78.377:2008.
Please refer to ANSI C78.377 for the chromaticity center.
*θ is the angle between the major axis of the ellipse and the x-axis,
and a and b are the major and minor semi-axes of an ellipse. (Ref. IEC 60081:1997 AnnexD)
x-y chart-CIE1931
0.44
2900K
2700K
0.43
0.42
0.41
0.40
0.39
0.38
2500K
Color region
Color region
(ANSI)
B.B. Locus
2600K
2800K
0.44
0.43
0.45
0.46
x
0.47
0.48
0.49
Note: The tolerance of measurement at our tester is VF+/-3% , Φv+/-10% , Chromaticity(x,y)+/-0.005 and Ra+/-1.
Symbol
Name
CITILED
CLL040-1818A5-273H1A7
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2119 05/12
4/11
DATA SHEET
5. Characteristics
Forward Current vs. Forward Voltage
Tc=25C
Forward Current vs. Relative Luminous Flux
Tc=25C
59.0
58.0
57.0
56.0
55.0
54.0
53.0
52.0
51.0
50.0
49.0
200%
180%
160%
140%
120%
100%
80%
60%
40%
20%
0%
0
500
1000 1500 2000 2500
IF [mA]
0
500 1000 1500 2000 2500
IF [mA]
Forward Current vs. Chromaticity Coordinate
Case Temperature vs. Chromaticity Coordinate
IF=1080mA
Tc=25C
0.020
0.020
Δｘ
Δｘ
0.015
0.015
Δｙ
Δｙ
0.010
0.010
0.005
0.005
0.000
0.000
-0.005
-0.010
-0.015
-0.020
-0.005
-0.010
-0.015
-0.020
0
500 1000 1500 2000 2500
IF [mA]
0
25
50
75
100
Tc [C]
Symbol
Name
CITILED
CLL040-1818A5-273H1A7
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2119 05/12
5/11
DATA SHEET
Case Temperature vs. Forward Voltage
IF=1080mA
Case Temperature vs. Relative Luminous Flux
IF=1080mA
56.0
55.0
54.0
53.0
52.0
51.0
120%
100%
80%
60%
40%
20%
0%
0
25
50
Tc [C]
Case Temperature vs. Allowable Forward Current Spectrum
75
100
0
25
50
75
100
Tc [C]
Tc=25C, IF =1080 mA
2500
2000
1500
1000
500
120%
100%
80%
60%
40%
20%
0%
0
350
450
550
650
750
850
0
25
50
75
100
125
λ [nm]
Tc [C]
Directive Characteristic
-40° -30° -20° -10°
10° 20° 30°
40°
100%
-50°
50°
80%
Y
-60°
60%
60°
70°
X
40%
20%
0%
-70°
-80°
-90°
80°
90°
X direction
Y direction
Symbol
Name
CITILED
CLL040-1818A5-273H1A7
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2119 05/12
6/11
DATA SHEET
6. Reliability
（１）Datails of the tests
Test Item
Test Condition
IF=1080mA Ta=25C (with Al-fin) × 1000 hours
IF=1080mA Tj=150C (with Al-fin) × 1000 hours
Continuous Operation Test
Low Temperature Storage Test -40 C × 1000 hours
High Temperature Storage Test 100 C × 1000 hours
Moisture-proof Test
Thermal Shock Test
85 C, 85 %RH for 500 hours
-40 C × 30 minutes – 100 C × 30 minutes, 100 cycle
(2)Judgement Criteria of Failure for Reliability Test
(Ta=25C)
Judgement Criteria for Failure
Measuring Item
Forward Voltage
Total Luminous Flux
Symbol
VF
Φv
Measuring Condition
IF=1080mA
>U X 1.1
<S X 0.85
IF=1080mA
U defines the upper limit of the specified characteristics. S defines the initial value.
Note : Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be
return to the normal ambient conditions after the completion of each test.
Symbol
Name
CITILED
CLL040-1818A5-273H1A7
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2119 05/12
7/11
DATA SHEET
7. Packing Specifications
(1) Packing
An empty tray is placed on top of a 6-tier tray which contain 30 pieces each.
(Smallest packing unit: 180 pieces)
A label with product name, quantity, lot number is placed on the upper empty tray.
Tray (Dimensions: 310 x 210 x 12 mm / Materials: Electrically conductive PS)
< Packing figure >
Product 30pcs/tray
1. TYPE
e.g. CLL040-1818A5-273H1A7
< Example of indication label >
2. P.No. (Cutomer's P/N)
3. Lot No.
CUSTOMER
TYPE : CLL***-******-******-*--(1)
- First and second letter: Last digit of the year e.g. 12 : year 2012
- Third letter: Production month e.g. 5 : May
Note: October, November and December are designated
P. NO
Lot No: *******
Q'ty : ***
: ******
---(2)
---(3)
---(4)
PASS
- Forth letter: CE's control number
4. Quantity
e.g. 5035
CITIZEN ELECTRONICS
Symbol
CITILED
CLL040-1818A5-273H1A7
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Name
Ref.CE-P2119 05/12
8/11
DATA SHEET
8．Precautions
(1) 1. Handling with care for this product
-Both the light emitting area and white dam over the light emitting area is composed of resin materials.
Please avoid the resin area from being pressed, stressed, rubbed, come into contact with sharp metal nail
(e.g. edge of reflector part) because the function, performance and reliability of this product
are negatively impacted.
-Please be aware that this product should not come into contact with any other parts
while incorporating in your lighting apparatus or your other products.
(2) Countermeasure against static electricity
-Handling of this product needs countermeasures against static electricity
because this is a semiconductor product.
-Please take adequate measures to prevent any static electricity being produced
such as the wearing of a wristband or anti-static gloves when handling this product.
-Every manufacturing facility in regard to the product (plant, equipment, machine, carrier machine
and conveyance unit) should be connected to ground and please avoid the product to be electric-charged.
-ESD sensitivity of this product is over 1000V (HBM, based on JEITA ED-4701/304).
-After assembling the LEDs into your final product(s), it is recommended to check
whether the assembled LEDs are damaged by static electricity (electrical leak phenomenon) or not.
-It is easy to find static damaged LED dies by a light-on test with the minimum current value.
(3) Caution of product assembly
-Regarding this product assembling on the heat sink, it is recommended to use M3 screw.
It might be good for screw tightening on the heat sink to do temporary tightening and final tightening.
In addition, please don’t press with excess stress on the product.
-The condition of the product assembling on the heat sink and the control of screw tightening torque
needs to be optimized according to the specification of the heat sink.
-Roughness, unevenness and burr of surface negatively impact thermal bonding
between the product and heat sink and increase heat thermal resistance between them.
Confidence of thermally and mechanical coupling between the product and heat sink are confirmed
by checking the mounting surface and measuring the case temperature of the product.
-In order to reduce the thermal resistance at assembly, it might be good to use
TIM (Thermal Interface Material) on whole contact surface of the product.
In case of using thermal grease for the TIM, it might be good to apply uniformly
on the contact surface of the product. In case of using thermal sheet for the TIM,
it might be good to make sure that the product is NOT strained by stress
when the screws are tightened for assembly.
Symbol
Name
CITILED
CLL040-1818A5-273H1A7
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2119 05/12
9/11
DATA SHEET
8. Precautions (continued)
(4) Thermal Design
-The thermal design to draw heat away from the LED junction is most critical parameter
for an LED illumination system. High operating temperatures at the LED junction adversely affect
the performance of LED’s light output and lifetime. Therefore the LED junction temperature should
not exceed the absolute maximum rating in LED illumination system.
-The LED junction temperature while operation of LED illumination system depends upon
thermal resistance of internal LED package (Rj-c), outer thermal resistances of LED package,
power loss and ambient temperature. Please take both of the thermal design specifications
and ambient temperature conditions into consideration for the setting of driving conditions.
-For more information, please refer to application note "Thermal Management".
(5) Driving Current
-A constant current is recommended as an applying driving current to this product.
In the case of constant voltage driving, please connect current-limiting resistor to each products in series
and control the driving current to keep under the absolute maximum rating forward current value.
-Electrical transient might apply excess voltage, excess current and reverse voltage to the product(s).
They also affect negative impact on the product(s) therefore please make sure that no excess voltage,
excess current and reverse voltage is applied to the product(s)
when the LED driver is turn-on and/or turn-off.
-For more information, please refer to application note "Driving".
(6) Lighting at a minimum current value
-In a case where the minimum current(IF min) is applied to the product,
some of LED dice in the product might look different in their brightness
due to the individual difference of the LED dice, and they are not failed.
(7) Electrical Safety
-This product is designed and produced according to IEC 62031:2008
(IEC 62031:2008 LED modules for general lighting. Safety specification)
-Dielectric voltage withstand test has been conducted on this product to see any failure
after applying voltage between active pads and aluminum section of the product,
and to pass at least 500V.
-Considering conformity assessment for IEC62031:2008, almost all items of the specification
depend upon your final product of LED illumination system.
Therefore, please confirm with your final product for electrical safety of your product.
As well, the products comply with the criteria of IEC62031:2008 as single LED package.
Symbol
Name
CITILED
CLL040-1818A5-273H1A7
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2119 05/12
10/11
DATA SHEET
8. Precautions (continued)
(8) Recommended soldering Condition (This product is not adaptable to reflow process.)
-For manual soldering
Please use lead-free soldering.
Soldering shall be implemented using a soldering bit at a temperature lower than 350C,
and shall be finished within 3.5 seconds for one land.
No external force shall be applied to resin part while soldering is implemented.
Next process of soldering should be carried out after the product has return to ambient temperature.
-For soldering correction
Regarding soldering correction, above conditions shall be applied.
Contacts number of soldering bit should be within twice for each terminal as a correction.
* Citizen Electronics cannot guarantee if usage exceeds these recommended conditions.
Please use it after sufficient verification is carried out on your own risk if absolutely necessary.
(9) Eye Safety
-The International Electrical Commission (IEC) published in 2006 IEC 62471
”2006 Photobiological safety of lamps and lamp systems ” which includes LEDs within its scope.
When sorting single LEDs according to IEC 62471, almost all white LEDs can be classified
as belonging to either Exempt Group (no hazard) or Risk Group 1 (low risk).
-However, Optical characteristics of LEDs such as radiant flux,
spectrum and light distribution are factors that affect the risk group determination of the LED,
and especially a high-power LED, that emits light containing blue wavelengths,
might have properties equivalent to those of Risk Group 2 (moderate risk).
-Great care should be taken when directly viewing an LED that is driven at high current,
has multiple uses as a module or when focusing the light with optical instruments,
as these actions might greatly increase the hazard to your eyes.
-It is recommended to regard the evaluation of stand-alone LED packages as a reference
and to evaluate your final product.
(10) This product is not designed for usage under the following conditions.
If the product might be used under the following conditions, you shall evaluate its effect
and appropriate them. In places where the product might:
-directly and indirectly get wet due to rain and/or at place with the fear.
-be damage by seawater and/or at place with the fear
-be exposed to corrosive gas (such as Cl2, H2S, NH3, SOx, NOx and so on) and/or at place with the fear.
-be exposed to dust, fluid or oil and/or at place with the fear.
Symbol
Name
CITILED
CLL040-1818A5-273H1A7
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2119 05/12
11/11
DATA SHEET
9. Precautions with regard to product use
(1) This document is provided for reference purposes only so that CITIZEN ELECTRONICS'
products are used as intended. CITIZEN ELECTRONICS neither makes warranties or
representations with respect to the accuracy or completeness of the information contained
in this document nor grants any license to any intellectual property rights or any other
rights of CITIZEN ELECTRONICS or any third party with respect to the information
in this document.
(2) All information included in this document such as product data, diagrams, charts,
is current as of the date this document is issued.
Such information, however, is subject to change without any prior notice.
Before purchasing or using any CITIZEN ELECTRONICS' products listed in this document,
please confirm the latest product information with a CITIZEN ELECTRONICS' sales office,
and formal specifications must be exchanged and signed by both parties prior to mass production.
(3) CITIZEN ELECTRONICS has used reasonable care in compiling the information
included in this document,
but CITIZEN ELECTRONICS assumes no liability whatsoever for any damages incurred as
a result of errors or omissions in the information included in this document.
(4) Absent ａ written signed agreement, except as provided in the relevant terms and conditions of
sale for product, and to the maximum extent allowable by law, CITIZEN ELECTRONICS
assumes no liability whatsoever, including without limitation, indirect, consequential, special,
or incidental damages or loss, including without limitation, loss of profits, loss of opportunities,
business interruption and loss of data, and disclaims any and all express or implied warranties
and conditions related to sale, use of product, or information, including warranties
or conditions of merchantability, fitness for a particular purpose, accuracy of information,
or no infringement.
(5) Though CITIZEN ELECTRONICS works continually to improve products' quality and reliability,
products can malfunction or fail. Customers are responsible for complying with safety standards
and for providing adequate designs and safeguards to minimize risk and avoid situations
in which a malfunction or failure of a product could cause loss of human life,
bodily injury or damage to property, including data loss or corruption.
In addition, customers are also responsible for determining the appropriateness of
use of any information contained in this document such as application cases not only with
evaluating by their own but also by the entire system.
CITIZEN ELECTRONICS assumes no liability for customers' product design or applications.
(6) Please contact CITIZEN ELECTRONICS' sales office if you have any questions regarding
the information contained in this document, or if you have any other inquiries.
CITIZEN Micro HumanTech is a registered trademark of Citizen Holding Co., Japan.
CITILED is a registered trademark of CITIZEN ELECTRONICS CO., LTD. Japan
Symbol
Name
CITILED
CLL040-1818A5-273H1A7
CITIZEN ELECTRONICS CO.,LTD. JAPAN
Ref.CE-P2119 05/12
相关型号：
©2020 ICPDF网 联系我们和版权申明