LED [CITIZEN]
Driving LEDs; 驱动LED
| 型号： | LED |
| 厂家： | 
CITIZEN ELECTRONICS CO., LTD. |
| 描述： | Driving LEDs |
| 文件： | 总2页 (文件大小：57K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Driving LEDs
1. Introduction
Prior to driving an LED, which is a kind of semiconductor
product, it is necessary to thoroughly comprehend its
properties. For instance, fluctuation of the forward voltage Vf
on an LED causes steep variations in the forward current If. In
the case of Fig. 1, if the temperature conditions are constant,
a 10% rise in Vf results in an increase of If by more than 40%.
Fluctuations in the forward current have a significant effect
on light emission, heat generation, and other phenomena on
LEDs. Especially regarding high-output lighting LEDs driven
by large current, strict control of the forward current is
important. In addition, the forward voltage fluctuates due to
temperature, and measures for heat release are therefore a
crucial factor.
Vf - If characteristic
160%
140%
120%
100%
80%
60%
40%
80%
90% 100% 110% 120%
Relative Vf change
Thus, when driving our LEDs, be sure to read the
specifications and application notes for the relevant products
and take measures according to their properties.
Fig. 1
2. Constant current driving system (recommended)
Even under the condition that the forward voltage
fluctuates due to heat generation or other reasons, the
constant current driving system supplies a certain current
to LEDs and allows relatively stable driving under varying
environmental conditions.
Tc -Vf characteristic
110%
105%
100%
95%
In general, as shown in the example of Fig. 2, the
forward voltage to apply constant current to an LED tends
to decrease as the temperature increases.
90%
0
20
40
60
80
100
Case temperature Tc (degC)
We recommend the constant current driving system
with the object of stable light-emitting output and
reliability.
Fig. 2
3. Constant voltage driving system
As mentioned above, the forward voltage to apply constant current to an LED tends to
decrease as the temperature increases. In the case of Fig. 2, when the case temperature Tc is
90°C, the same amount of current is achieved by the approx. 5% lower forward voltage than at Tc
= 25°C. If constant voltage driving is provided under these conditions, comparative overvoltage
and overcurrent driving status is possible.
If constant voltage driving is employed, assume the temperature in actual usage and
implement appropriate measures to limit the current.
4. Precautions on inrush current
If an LED is connected to capacitive loads, such as capacitors, an instantaneous inrush
current may occur when the system is turned on/off. (For instance, when the secondary side of a
power supply circuit in the energized state is turned on/off.) Avoid any possible occurrence of
inrush current. If it is unavoidable, implement measures so that the absolute maximum rating of
the LED will not be exceeded.
Ref.CE-P467 04/09
5. Connection among multiple LEDs (Serial connection is recommended.)
When multiple units of identical LED products are connected, a serial connection makes the
current through LEDs uniform. We recommend serial connections with the object of stable
light-emitting output and reliability.
When they are connected in parallel, you need to consider variations in the forward voltage
among the LEDs. To apply even current to each LED connected in parallel and which has
different properties on forward voltage, implementation of measures is required such that an
appropriate current-regulation resistor for the actual temperature conditions is connected to each
LED in serial.
Ref.CE-P467 04/09
相关型号：
LED IC导热双面胶,导热胶带,导热胶贴,导热贴纸
高科技不断的研发于生产的今天，导热的行业也在萌发中，导热双面胶起着很大的核心做用. 一般的导热材料难于对电子重要部位起着很好的作用，我们的导热双面胶在这行业中起到了重大的作用 在CPU领域中我们以经在国内外站有很大的市场优势，粘着力强，使用寿命长，导热系数高，因此得到很好的推广。 1) 耐反弹性好，防止曲面部分的翘起。适用于曲面部分粘合以及不同材料间的粘合。 2) 对于于金属等各种接着体有很强的粘合力。适用于各种接着体。 3) 导热性，耐气候性，伸缩性良好，粘合稳定，持久。 4) 冲压加工性能良好。适用于半冲压，全冲压加工。 5) 主要用于高端产品的CPU散热片,LED,IC,BGA与及其他粘接的特殊需求的导热双面胶。 6）运用于电子行业，照明行业，五金行业，印刷行业等其他制造行业。 注：如需进一步了解我司的导热双面胶欢迎来电咨询！
ETC
©2020 ICPDF网 联系我们和版权申明