ANT21 [CIT]
CIT SWITCH; CIT SWITCH
| 型号： | ANT21 |
| 厂家： | 
CIT RELAY & SWITCH |
| 描述： | CIT SWITCH |
| 文件： | 总11页 (文件大小：630K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ANT
•
Wide variety of applications from
consumer electronics to commercial
Standard epoxy sealed terminations
Gold contacts available for low power applications
Available support brackets for greater stability
Up to four poles with seven functions available
Anti-rotation feature on flat toggles
•
•
•
•
•
•
High torque bushing prevents separation
from frame during installation
•
Wide variety of terminal options
- E222871
SPECIFICATIONS
Electrical Ratings
5A @ 120VAC, 28VDC; 2A @ 250VAC
See Contact Options
50,000 cycles typical
< 20 mΩ max initial @ 2-4VDC, 100mA
1500Vrms min
Electrical Life
Contact Resistance
Dielectric Strength
Insulation Resistance
Operating Temperature
Storage Temperature
> 100MΩ min
-40°C to 85°C
-40°C to 85°C
MATERIALS ←RoHS COMPLIANT
Actuator
Housing
Cover
Brass, Chrome Plated
DAP – Diallyl Phthalate
Stainless Steel
Bushing
Bracket
Contacts
Terminals
Brass, Nickel Plated
Brass, Tin Plated
Phosphor Bronze, Silver Plated
Brass, Silver Plated
www.citswitch.com
page 115
phone – 763.535.2339 fax – 763.535.2194
ANT
TOGGLE SWITCH ORDERING INFORMATION
Series:
B
Q
E
ANT
2
3
T
M
ANT
Number of Poles:
1 = SPDT
2 = DPDT
3 = 3PDT
4 = 4PDT
Switch Function:
1 = ON-NONE-ON
2 = ON-NONE-(ON)
3 = ON-OFF-ON
4 = (ON)-OFF-(ON)
5 = ON-OFF-(ON)
6 = ON-ON-ON ** See Three Way Wiring Section for Details
Actuator:
T = 5.08mm, Std
S = 10.41mm, Std
X = 13.97mm, Std
V = 16.26mm, Std
W = 21.34mm, Std
Y = 6.35mm, Flat Toggle **only available with AR1/AR2/AN1/AN2 bushings
F = 12.30mm, Flat Toggle **only available with AR1/AR2/AN1/AN2 bushings
G = 21.00mm, Flat Toggle **only available with AR1/AR2/AN1/AN2 bushings
K = 13.50mm, Flat Toggle **only available with AR1/AR2/AN1/AN2 bushings
Z = 12.37mm, Large Toggle **only available with BZ/BZR bushings
Z1 = 17.45mm, Large Toggle **only available with BZ/BZR bushings
LK = 14.73mm, Locking Toggle, Round Top **only available with K/K1 bushings
LK1 = 14.73mm, Locking Toggle, Flat Top **only available with K/K1 bushings
P(color) = 21.34mm, Plastic **See color choices in Actuator Option section
PX = 26.30mm, Plastic, Flat Toggle **only available with BZ/BZR bushings
Bushing:
E / E1 = 8.89mm, ¼-40NS / Non-Threaded, Keyway
F / F1 = 7.10mm, ¼-40NS / Non-Threaded, Keyway
J = 8.89mm, ¼-40NS, Flat
W = 8.89mm, M6P-0.75 (Metric), Keyway
H = 8.00mm, High Torque, ¼-40NS, Keyway
G = 7.52mm, High Torque, ¼-40NS, Flat
AR1 / AR2 = 7.55mm, Anti-Rotation, ¼-40NS / Non-Threaded, Keyway
AN1 / AN2 = 7.55mm, Anti-Rotation, ¼-40NS / Non-Threaded, Flat
BZ = 11.38mm, 15/32 -32NS, Keyway
BZR = 11.38mm, 15/32 -32NS, Keyway, with support insert
L = 7.55mm, ¼-40NS, Flat, Splash proof
K / K1 = 8.00mm, ¼-40NS / Non-Threaded, Keyway
**See Actuator Option section for bushing availability with various actuators
Terminals:
B = Solder Lug, C = PC Pin
D = Quick Connect
**Wire wrap terminals available in various lengths, contact factory
H = Horizontal Mount, Right Angle PC Pin; HS = Snap-in
V = Vertical Mount, Right Angle PC Pin; VS = Snap-in
S20 or S25 = PC Pin with Support Bracket; V20 or V25= Snap-in Support Bracket
S35 or S40 = PC Pin with Support Bracket; V35 or V40 = Snap-in Support Bracket
Contacts:
Q = Silver Plated
R = Gold Plated
G = Gold over Silver Plated
Epoxy Seal: E = Epoxy Seal
Actuator Cover:
Actuator Cover Colors:
Blank = No Cover
1 = White
S = for S, T, X, V, & W actuators
E = for E, F, J, & G bushings
Z = for BZ & BZR bushings
2 = Black
3 = Red
** Color choices only available with S toggle cover
www.citswitch.com
page 116
phone – 763.535.2339 fax – 763.535.2194
ANT
SWITCH FUNCTION
Toggle Position
Function
ON
ON
NONE
NONE
ON
(ON)
1
2
ON
OFF
ON
3
SPDT
(ON)
ON
OFF
OFF
(ON)
(ON)
4
5
Terminals
2-3
2-1
---
Toggle Position
Function
ON
NONE
NONE
OFF
ON
1
2
3
4
5
ON
ON
(ON)
ON
(ON)
ON
OFF
(ON)
(ON)
OFF
2-3
2-1
DPDT
Terminals
6
---
ON
5-6
5-4
ON
ON
2-3
2-3
2-1
Terminals
5-6
5-4
5-4
Toggle Position
Function
ON
ON
ON
(ON)
ON
NONE
NONE
OFF
ON
(ON)
ON
(ON)
(ON)
1
2
3
4
5
3PDT
OFF
OFF
2-3
5-6
8-9
2-1
5-4
8-7
Terminals
---
Toggle Position
Function
ON
NONE
NONE
OFF
ON
1
2
3
4
5
ON
ON
(ON)
ON
(ON)
OFF
(ON)
ON
2-3
OFF
(ON)
2-1
5-6
5-4
4PDT
Terminals
6
---
8-9
8-7
11-12
ON
11-10
ON
ON
2-3
2-3
2-1
5-6
5-4
5-4
Terminals
8-9
8-9
8-7
11-12
11-10
11-10
www.citswitch.com
page 117
phone – 763.535.2339 fax – 763.535.2194
ANT
ACTUATOR OPTIONS
** Actuator lengths shown with E bushing, subtract 1.78mm for F/F1 bushing, subtract 0.51mm for M bushing
T
S
X
V
W
** Only available with AR1/AR2 & AN1/AN2 bushings.
Y
F
G
K
** Only available with BZ & BZR bushings.
Z
Z1
PX
PX actuator is plastic (Black)
** LK & LK1 only available with K & K1 bushings. LK & LK1 are not available with momentary functions
** P actuator is plastic
P2 = Black, std
P1 = White
P3 = Red
Contact factory for other
color options
LK
LK1
P2
www.citswitch.com
page 118
phone – 763.535.2339 fax – 763.535.2194
ANT
BUSHING OPTIONS
E (Threaded)
E1 (Non-
F (Threaded)
J (Threaded)
H (Threaded)
High Torque
G (Threaded)
High Torque
W (Threaded)
Metric
F1 (Non-
Threaded)
Threaded)
AR1 (Threaded)
AN1 (Threaded)
BZ (Threaded)
BZR (Threaded)
Impact Resistant
K (Threaded)
AR2 (Non-Threaded) AN2 (Non-Threaded)
K1 (Non-Threaded)
Anti-Rotation
Anti-Rotation
** If selecting F, G, or K actuator, one of these
** Only used with Z, Z1, & PX actuators
**Only used with LK & LK1
actuators
bushings must be selected
PANEL MOUNTING
1/4”- 40 Bushings
Metric Bushing
15/32” Bushings
L (Threaded)
Splash Proof
** Not available with
Z, Z1, & PX actuators
www.citswitch.com
page 119
phone – 763.535.2339 fax – 763.535.2194
ANT
TERMINAL OPTIONS
B (Single Pole)
B (Double Pole)
B (3 Pole)
B (4 Pole)
C (Single Pole)
D (Single Pole)
C (Double Pole)
D (Double Pole)
C (3 Pole)
D (3 Pole)
C (4 Pole)
D (4 Pole)
H (HS – Snap-in) = Horizontal Mount, Right Angle PC Pins (Single Pole)
H (HS – Snap-in) = Horizontal Mount, Right Angle PC Pins (Double Pole)
www.citswitch.com
page 120
phone – 763.535.2339 fax – 763.535.2194
ANT
TERMINAL OPTIONS
V (VS – Snap-in) = Vertical Mount, Right Angle PC Pins (Single Pole)
V (VS – Snap-in) = Vertical Mount, Right Angle PC Pins (Double Pole)
V (VS – Snap-in) = Vertical Mount, Right Angle PC Pins (Three Pole)
V (VS – Snap-in) = Vertical Mount, Right Angle PC Pins (Four Pole)
www.citswitch.com
page 121
phone – 763.535.2339 fax – 763.535.2194
ANT
TERMINAL OPTIONS
Terminal
Option
“A”
Dimension
S20-V20
S25-V25
11.68
16.00
S20/S25 (V20/V25 – Snap-in Bracket) = PC Pins with Support Bracket (Single Pole)
Terminal
Option
“A”
Dimension
11.68
S20-V20
S25-V25
16.00
S20/S25 (V20/V25 – Snap-in Bracket) = PC Pins with Support Bracket (Double Pole)
Terminal
Option
“A”
Dimension
S20-V20
S25-V25
11.68
16.00
S20/S25 (V20/V25 – Snap-in Bracket) = PC Pins with Support Bracket (Three Pole)
www.citswitch.com
page 122
phone – 763.535.2339 fax – 763.535.2194
ANT
TERMINAL OPTIONS
Terminal
Option
“A”
Dimension
S20-V20
S25-V25
11.68
16.00
S20/S25 (V20/V25 – Snap-in Bracket) = PC Pins with Support Bracket (Four Pole)
Terminal
“A”
Option
Dimension
11.68
S35-V35
S40-V40
16.00
S40 (V40 – Snap-in Bracket) = PC Pins with Support Bracket (Single Pole)
Terminal
Option
“A”
Dimension
S35-V35
S40-V40
11.68
16.00
S40 (V40 – Snap-in Bracket) = PC Pins with Support Bracket (Double Pole)
www.citswitch.com
page 123
phone – 763.535.2339 fax – 763.535.2194
ANT
TERMINAL OPTIONS
Terminal
Option
“A”
Dimension
S35-V35
S40-V40
11.68
16.00
S40 (V40 – Snap-in Bracket) = PC Pins with Support Bracket (Three Pole)
Terminal
“A”
Option
Dimension
S35-V35
11.68
16.00
S40-V40
S40 (V40 – Snap-in Bracket) = PC Pins with Support Bracket (Four Pole)
CONTACT OPTIONS
Designator Contact Material
Terminal Material
Silver Plating
Gold over Nickel Plating
Gold over Silver Plating
Electrical Ratings
Q
R
G
Silver Plating
5A @ 120VAC, 28VDC; 2A @ 250VAC
.4 VA max @ 20VAC or VDC max
.4 VA max @ 20VAC or VDC max or
5A @ 120VAC, 28VDC; 2A @ 250VAC
Gold over Nickel Plating
Gold over Silver Plating
CAP OPTIONS
RUBBER TOGGLE COVER
SEALED BOOT
SEALED BOOT
S_
E
Z
** For use with S, T, X, V, & W actuators
1 = White, 2 = Black, 3 = Red
** For use with E, F, J, & G bushings only.
Black color standard.
** For use with BZ & BZR bushings only. Black
color standard.
www.citswitch.com
page 124
phone – 763.535.2339 fax – 763.535.2194
ANT
THREE WAY WIRING DIAGRAM
POSITION 1
POSITION 2
POSITION 3
POSITION 1
POSITION 2
POSITION 3
HARDWARE **Two hex nuts, one lock washer, & one locking ring supplied standard with threaded bushings
Hex Nut
Hex Nut
Lock Washer
Lock Washer
Locking Ring
Dress Nut
Knurled Nut
Knurled Nut
Knurled Nut
Knurled Nut
**For use with E, F, M, AR1, L, & K bushings
Locking Ring
Dress Nut
**For use with J, G, & AN1 bushings
Hex Nut
Lock Washer
Locking Ring
**For use with BZ & BZR bushings
www.citswitch.com
page 125
phone – 763.535.2339 fax – 763.535.2194
相关型号：
ANT3-M24LR-A
SMD-inductor based antenna reference board for the M24LR64-R Dual Interface EEPROM
STMICROELECTR
ANT300-10
RF/Microwave Termination, 0 MHz - 4000 MHz 50 ohm RF/MICROWAVE TERMINATION, ROHS COMPLIANT, FM-1
AEROFLEX
©2020 ICPDF网 联系我们和版权申明