7101K2Y9AW1PE
更新时间:2024-09-18 12:37:32
描述:7000 Series Miniature Toggle Switches
7101K2Y9AW1PE 概述
7000 Series Miniature Toggle Switches 7000系列小型钮子开关
7101K2Y9AW1PE 数据手册
通过下载7101K2Y9AW1PE数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载7000 Series
Miniature Toggle Switches
Features/Benefits
Typical Applications
•
•
Multi-pole and multi-position
•
•
•
Telecommunications
Instrumentation
Wide variety of actuator and
termination options
Medical equipment
•
•
Epoxy terminal-seal compatible
with bottom wash cleaning
RoHS complaint models available
Models Available
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material: 5 AMPS @ 120 V AC or 28 V DC;
2 AMPS @ 250 V AC. See page G-16 for additional ratings.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E
method 9 (1 hour steam aging).
ELECTRICAL LIFE: 7X01 and UX1 models: 100,000 make-and-break
cycles at full load. All other models: 40,000 cycles.
For materials see page F-4.
NOTE: Any models supplied with P, S R, Q, B or G contact material are RoHS compliant
and compatible.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC,
100 mA, for both silver and gold plated contacts.
9
NOTE: Specifications listed above are for switches with standard options. For information
on specific and custom switches, consult Customer Service Center.
INSULATION RESISTANCE: 10 Ω min.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages F–4 thru F–16. For additional options not shown in catalog, consult our Customer Service Center.
Bushing
Switch Function
7101 SP On-None-On
7103 SP On-Off-On
D
H
Y
.280 high, keyway
.296 high, flat
.350 high, keyway
Actuator
Contact Material
M
.200" high
B
P
Q
S
G
R
Gold
Gold, matte-tin
Silver
Silver, matte-tin
Gold over silver
Gold over silver, matte-tin
Seal
7105 SP Mom.-Off-Mom.
7107 SP On-Off-Mom.
7108 SP On-None-Mom.
7109 SP None-On-Mom.
7201 DP On-None-On
7203 DP On-Off-On
7205 DP Mom.-Off-Mom.
7207 DP On-Off-Mom.
7208 DP On-None-Mom.
7211 DP On-On-On
7213 DP On-On-Mom.
7215 DP Mom.-On-Mom.
7301 3P On-None-On
7303 3P On-Off-On
7305 3P Mom.-Off-Mom.
7308 3P On-None-Mom.
7401 4P On-None-On
7403 4P On-Off-On
P3 Flatted, anti-rotation,
E
I
Epoxy
Epoxy potted
base
NONE No bushing
choice required
CW Splashproof
.450" high
S
T
.420" high
.687" high, 15/32 bushing
D8 .280" high, flat
K2 Locking lever, .704" high
K9 Locking lever, .704" high
K12 Locking lever, .732" high
K19 Locking lever, .732" high
D9 .280" high, keyway
H3 .315" high, keyway
H4 8mm high, keyway
Y1 .378" high, keyway
Y3 8.9mm high, keyway
Y4 .378" high, flat
Actuator Color/Finish
NONE Bright chrome
L
.840" high
L1 .640" high
L1P Anti-rotation, .640" high
L2 .550" high
2
3
S
Black
Red
Satin chrome
Y9 .350" high, keyway
L2P Anti-rotation, .550" high
L3 Plastic .940” inch
L40 Lever handle without cap
L41 .531" high lever handle with cap
L42 .838" high lever handle with cap
MP Anti-rotation, .200" high
P1 Flatted, anti-rotation,
.840" high
Terminations
Right angle, PC thru-hole
AV2 Vert. right angle, PC thru-hole
PC Thru-hole
V3 .460 high, V-bracket
Solder lug
A2 Right angle, PC thru-hole
A3 Right angle, PC thru-hole
A4 Right angle, PC thru-hole
AW1 Right angle, extended, PC thru-hole
AW4 Right angle, extended, PC thru-hole
V2 .555" high, V-bracket
A
KXX Actuator Color/Finish
NONE Natural aluminum
C
2
3
7
Black anodized aluminum
Red anodized aluminum
Blue anodized aluminum
Z
7405 4P Mom.-Off-Mom.
7408 4P On-None-Mom.
7411 4P On-On-On
7413 4P On-On-Mom.
7415 4P Mom.-On-Mom.
P4 Flatted, anti-rotation,
.250" high
SP Anti-rotation, .420" high
Bushing Finish
NONE Nickel on all
bushings (except D8,
satin chrome)
Black
Note: UL/CSA models available, T1 .487" high, 15/32 bushing
see pages F-4 & F-5.
T1P Anti-rotation, .487" high,
V4 .630" high, V-bracket
V6 .460" high, V-bracket
2
15/32 bushing
T2P Flatted, anti-rotation,
.610” high, 15/32 bushing,
TP Anti-rotation, .687" high,
15/32 bushing
V7 .630" high, V-bracket
V8 .953" high, V-bracket
V9 1.150" high, V-bracket
V21 .555" high, snap-in V-bracket W1 .964" long, wire wrap
W
.750" long, wire wrap
F
V31 .460" high, snap-in V-bracket W3 .425" long, wire wrap
V41 .630" high, snap-in V-bracket W4 1.062" long, wire wrap
V71 .630" high, snap-in V-bracket
V81 .953" high, snap-in V-bracket
W5 1.305" long, wire wrap
Z3 Quick connect
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F–3
7000 Series
Miniature Toggle Switches
Materials
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized, or
diallyl phthalate (DAP) (UL 94V-0).
CENTER CONTACTS & ALL TERMINALS: B contact material: Copper
alloy, with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See above for additional contact materials.
ACTUATOR: Brass, chrome plated.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut & Locking Ring: Brass, nickel plated.
Lockwasher: Steel, nickel plated.
SWITCH SUPPORT: Brass or steel, tin plated.
NOTE: Materials listed above are for switches with standard options. For information
on specific and custom switches, consult Customer Service Center.
END CONTACTS: B contact material: Copper alloy, with gold plate
over nickel plate. Q contact material: Coin silver, silver plated.
See page F-15 for additional contact materials.
SWITCH FUNCTION
SWITCH FUNCTION
CONNECTED TERMINALS
POS. 1
POS. 2
POS. 3
POS. 1
POS. 2
POS. 3
UL/CSA**
MODEL
NO.
NO.
POLES
MODEL NO.
SCHEMATIC
7101
U11
ON
ON
NONE
OFF
ON
2-3
2-3
N/A
2-1
2-1
7103
7105
7107
7108
7109
U13
U15
U17
U18
U19
ON
MOM.
ON
OFF
MOM.
MOM.
MOM.
MOM.
OPEN
SP
OFF
ON
NONE
ON
2-3
N/A
2-3
2-1
2-1
NONE
N/A
SPDT
SPDT
1/4-40 UNS-2A
KEYWAY
Terminal Numbers
For Reference Only
Part number shown: 7101SYZBE
7201
7203
7205
U21
ON
ON
NONE
OFF
OFF
OFF
NONE
ON
ON
2-3,5-6
2-3,5-6
2-3,5-6
2-3,5-6
N/A
OPEN
N/A
2-1,5-4
U23
ON
U25
MOM.
ON
MOM.
MOM.
MOM.
ON
2-1,5-4
2-1,5-4
2-1,5-4
7207
U27
DP
7208
U28
ON
7211 *
7213*
7215*
U211*
U213*
U215*
ON
ON
ON
MOM.
MOM.
2-3,5-4
DPDT
MOM.
ON
DPDT
1/4-40 UNS-2A
KEYWAY
Terminal Numbers
For Reference Only
F
Part number shown: 7201SYZQE
MOM. = Momentary
** U11–U415 model nos.
with all options when ordered with G, R, Q or S contact material.
* Wiring for 3-way switch, see Section N.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F–4
7000 Series
Miniature Toggle Switches
SWITCH FUNCTION
SWITCH FUNCTION
CONNECTED TERMINALS
POS. 1
POS. 2
POS. 3
POS. 1
POS. 2
POS. 3
UL/CSA**
MODEL
NO.
NO.
POLES
MODEL NO.
7301
SCHEMATIC
U31
U33
U35
U37
U38
ON
ON
NONE
OFF
ON
2-3,5-6,8-9
2-3,5-6,8-9
2-3,5-6,8-9
N/A
OPEN
N/A
2-1,5-4,8-7
2-1,5-4,8-7
2-1,5-4,8-7
7303
ON
3P
7305
MOM.
ON
OFF
MOM.
MOM.
MOM.
7307
OFF
3PDT
7308
ON
NONE
3PDT
1/4-40 UNS-2A
KEYWAY
Terminal Numbers
For Reference Only
Part number shown: 7301SYZQE
7401
7403
7405
7408
7411*
7413*
7415*
U41
ON
ON
NONE
ON
ON
2-3,5-6,8-9,11-12
N/A
2-1,5-4,8-7,11-10
U43
OFF
OFF
NONE
ON
U45
MOM.
ON
MOM.
MOM.
ON
2-3,5-6,8-9,11-12
2-3,5-6,8-9,11-12
OPEN
N/A
2-1,5-4,8-7,11-10
2-1,5-4,8-7,11-10
U48
4P
U411*
U413*
U415*
ON
ON
ON
MOM.
MOM.
2-3,5-6,8-9,11-12 2-3,5-4,8-9,11-10 2-1,5-4,8-7,11-10
4PDT
MOM.
ON
4PDT
1/4-40 UNS-2A
KEYWAY
Terminal Numbers
For Reference Only
Part number shown: 7401SYZQE
MOM. = Momentary
** U11–U415 model nos.
all options when ordered with G, Q, R or S contact material.
* Wiring for 3-way switch, see Section N.
F
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F–5
7000 Series
Miniature Toggle Switches
ACTUATOR FINISH
ACTUATOR
ACTUATOR
1
1
1
S
.420" HIGH
M
.200" HIGH
L, L1, L2 .840", .640", .550" HIGH
L1P, L2P ANTIROTATION,
2,3
2,3
SP ANTIROTATION, .420" HIGH
MP ANTIROTATION, .200" HIGH
2,3
.840", .640", .550" HIGH
OPTION
CODE
*
DIM ‘A’
*DIM. ‘A’
*
L
.840 (21,34)
.640 (16,26)
.550 (13,97)
L1, L1P
L2, L2P
S actuator standard when ordered with
C, W-W5, Z & Z3 terminations.
M actuator standard when ordered with
all terminations except C, W-W5, Z & Z3.
Caps are available separately, see page F-16.
Caps are available separately, see page F-16.
Caps are available separately, see page F-16.
2,3
2,3
P1 FLATTED WITH ANTIROTATION, .840" HIGH
P3 FLATTED WITH ANTIROTATION,
P4 FLATTED WITH ANTIROTATION, .250" HIGH
2,3
.450" HIGH
*
*
*
Dress nut part number 709901201 supplied standard with threaded bushing. (Part number 709903201 with metric threaded bushings.)
1,2
1,2
T
.687 (17,45) HIGH
T1 .487 (12,37) HIGH
T2P FLATTED, ANTIROTATION, .610" HIGH,
1,2,3
15/32 BUSHING
TP ANTIROTATION, .687 (17,45) HIGH,
T1P ANTIROTATION, .487 (12,37) HIGH,
1,2,3
1,2,3
15/32 BUSHING
15/32 BUSHING
15/32-32 UNS-2A
.687
(17,45)
.487
(12,37)
15/32-32 UNS-2A
15/32-32 UNS-2A
.448
(11,38)
Bushing option code not required unless CW splashproof bushing ordered. TP & T1P
actuators not available with CW splashproof bushing. All TXX actuators not available on
single pole models with A-A4, AW1-AW4 terminations.
Bushing option code not required. T2P actuator not available
with CW splashproof bushing or single pole models with
A-A4, AW1-AW4 terminations.
1
NOTE: Black hardware is supplied when either
black actuators or bushings are specified. For
additional hardware, see Section N.
L, L1, L2, M, S & TXX actuators not available
OPTION
with Y1 bushing.
2
CODE
NONE
2
ACTUATOR FINISH
BRIGHT CHROME-With Nickel Plated Bushing
BLACK
L1P, L2P, MP, P1, P3, P4, SP & TXX actuators not
F
available with D8 & H4 bushing.
3
Antirotation: Provides anti-‘push-in’ feature on
actuator.
S
SATIN CHROME
* Add .070 (1,78) for D, D8 & D9 bushings,
subtract .020 (0,51) for H3 bushing.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F–6
7000 Series
Miniature Toggle Switches
ACTUATOR FINISH/COLOR
ACTUATOR
ACTUATOR
K2 LOCKING LEVER, .704" HIGH
K12 LOCKING LEVER, .732" HIGH
(threaded)
(threaded)
K9 LOCKING LEVER, .704" HIGH
K19 LOCKING LEVER, .732" HIGH
(unthreaded)
(unthreaded)
OPTION
CODE
ACTUATOR CAP FINISH
NATURAL ALUMINUM–With Nickle Plated Bushing
BLACK ANODIZED ALUMINUM
NONE
2
3
7
RED ANODIZED ALUMINUM
BLUE ANODIZED ALUMINUM
ReplacesK1, K18
ReplacesK, K8
Locking Positions
NOTE: To prevent accidental actuation, toggle must be lifted
before being actuated. When released, toggle will lock in place.
Overtightening mounting nut may cause actuator to bind.
Locking levers supplied with bushing shown.
Bushing option code not required unless CW splashproof
bushing ordered.
–01 Models
2 Position lock
–03 & –11 Models –05, –09 & –15 Models –07 & –13 Models
3 Position lock 1 Position lock 2 Position lock
–08 Models
1 Position lock
L40 LEVER HANDLE WITHOUT CAP
L41 PLASTIC LEVER HANDLE WITH
L42 PLASTIC LEVER HANDLE WITH
ANTIROTATION AND CAP, P/N 4810
ANTIROTATION AND CAP, P/N 4811
No color choice required
Finish: Matte (L41 & L42).
L3 PLASTIC .940” HIGH
Gloss Plastic
OPTION
CODE
PLASTIC ACTUATOR
COLORS
*
NONE
No Actuator Color (L40 option)
2
3
BLACK
RED
Chrome Finish
F
* Add .070 (1,78) for D, D8 & D9 bushings,
subtract .020 (0,51) for H3 bushing.
NOTE: Lever handle for L41 & L42 actuators supplied, but not installed. For interchangeability,
order L40 actuator option and lever handles separately, see page F-16. L4X actuators not
available with H4, Y1, Y4 bushings. Antirotation: Provides anti-‘push-in’ feature on actuator.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F–7
7000 Series
Miniature Toggle Switches
BUSHING FINISH
BUSHING
BUSHING
Y
.350" HIGH,
THREADED, KEYWAY
NONE NO BUSHING
D
.280" HIGH,
THREADED, KEYWAY
H
.296" HIGH, FLAT
THREADED, HIGH TORQUE
H3 .315" HIGH, KEYWAY
1,2
THREADED, HIGH
1,2
TORQUE
Y9 .350" HIGH,
UNTHREADED,
KEYWAY
D8 .280" HIGH, UNTHREADED,
3
FLAT
D9 .280" HIGH, UNTHREADED,
KEYWAY
No bushing choice required
with KXX, TXX actuators.
(exception: Specify CW if
splashproof bushing desired).
D8
D, D9
1/4-40 UNS-2A
1/4-40 UNS-2A
1/4-40 UNS-2A
1/4-40 UNS-2A
D9 bushing standard with all terminations
except C, W-W5, Z or Z3. Add .070 (1,78) to
all actuators lengths with D, D8 & D9 bushings.
Y bushing standard with C,
W-W5, Z or Z3 terminations.
Subtract .020 (0,51) from all actuator
lengths for H3 bushing.
H4 8mm HIGH, KEYWAY, THREADED,
Y1 .378" HIGH, KEYWAY, THREADED, Y3 8.9mm HIGH, KEYWAY,
Y4 .378" HIGH, FLAT, THREADED,
1,2,3
1,2,4
1,2,5
METRIC HIGH TORQUE
HIGH TORQUE
THREADED, METRIC
HIGH TORQUE
1/4-40 UNS-2A
1/4-40 UNS-2A
1,2
CW THREADED, SPLASHPROOF
For T & T1 actuators.
For actuators other than T & T1.
OPTION
CODE
BUSHING FINISH
NICKEL on all bushings
except ‘D8’ satin chrome.
NONE
2
BLACK
15/32-32 UNS-2A
1/4-40 UNS-2A
1
Will withstand 12 in.-lbs. of torque with no distortion.
2
CW. H, H3, H4, Y1 & Y4 bushings not available on single pole models
with A4 terminations.
3
D8 & H4 bushings available only with L, L1, L2, M & S actuators.
4
Y1 bushing available only with LXP, MP, PX & SP actuators.
IP67 Degree of protection, totally protected against
dust, full-scale voltage protection, temporary immersion.
Internal actuator seal standard.
External bushing seal available separately from APM
Hexseal, part # MFS-60064.
5
Y4 bushing not available with L4X actuators.
IP67 Degree of protection, totally protected
against dust, full-scale voltage protection,
temporary immersion. Internal actuator seal
and external bushing seal washer standard.
NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with
threaded bushings. Black hardware is supplied when either black bushings or
actuators are specified. Optional mounting nut and locking ring styles and finishes
available, see Section N.
PANEL MOUNTING
1/4 INCH BUSHING
METRIC BUSHING
15/32 INCH BUSHING
F
Without locking ring.
With standard locking ring. With small locking ring. Without locking ring. With locking ring. Without locking ring.
With standard locking ring.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F–8
7000 Series
Miniature Toggle Switches
TERMINATIONS
Z
SOLDER LUG
C
PC THRU-HOLE
PC MOUNTING
.030 (0,76) Thk.
Not available with P, R or S contact materials.
SPDT thru 4PDT
SPDT thru 4PDT
Z3 QUICK CONNECT
W, W1, W3, W4, W5 WIRE WRAP
OPTION
CODE
DIM ‘A’
Dim 'A'
W
.750 (19,05)
.964 (24,48)
.425 (10,80)
1.062 (26,97)
1.305 (33,15)
W1
W3
W4
W5
.030 (0,76) Thk.
.030 (0,76) Thk.
Not available with P, R or S contact materials.
Mating quick connector available, order part
number 530100000, page F-16.
SPDT thru 4PDT
SPDT thru 4PDT
A
RIGHT ANGLE, PC THRU-HOLE
Actuator Shown
In Pos. 1
7101MD9ABE
SECTION A-A
Horizontal Actuation
Terminal Nos.
For Reference Only
SPDT
Switch support with CW, H, H3, H4, Y1, Y4
bushings and KXX actuators.
Part No. Shown: 7101MHABE
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
AW1, AW4 RIGHT ANGLE, EXTENDED,
PC MOUNTING
PC THRU-HOLE
OPTION
CODE
DIM ‘A’
AW1
.72 (18,3)
.83 (21,1)
Dim 'A'
AW4
F
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F–9
7000 Series
Miniature Toggle Switches
TERMINATIONS
A
RIGHT ANGLE, PC THRU-HOLE
7201MD9ABE
Horizontal Actuation
DPDT
Actuator Shown
In Pos. 1
Terminals &
Support
SECTION A-A
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
AW1, AW4 RIGHT ANGLE, EXTENDED,
PC THRU-HOLE
PC MOUNTING
OPTION
CODE
DIM ‘A’
AW1
.40 (10,2)
.50 (12,7)
DIM 'A'
AW4
.33 (8,4)
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
A
RIGHT ANGLE, PC THRU-HOLE
7301MD9ABE
Horizontal Actuation
3PDT
Terminals &
Support
Actuator Shown
In Pos. 1
SECTION A-A
AW4 RIGHT ANGLE, EXTENDED, PC THRU-HOLE
PC MOUNTING
.18
(4,6)
F
.33 TYP.
(8,4)
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F–10
7000 Series
Miniature Toggle Switches
TERMINATIONS
A2 RIGHT ANGLE, PC THRU-HOLE,
PC MOUNTING
.156" PITCH
7101MHA2BE
Horizontal Actuation
SPDT
Terminals & Support
Actuator Shown In Pos. 1
Switch support with CW, H, H3, H4, Y1, Y4
bushings and KXX actuators.
Not available with TXX actuators and I seal.
Part No. Shown: 7101MHA2BE
Terminal bend radii and lead-in manufacturing option.
A4 RIGHT ANGLE, PC THRU-HOLE
.156" PITCH
PC MOUNTING
7101MD9A4BE
Horizontal Actuation
SPDT
Actuator Shown In Pos. 1
Not available with KXX & TXX actuators, CW, H, H3, H4, Y1 & Y4 bushings,
and I seal. Terminal bend radii and lead-in manufacturing option.
NOTE: The A4 option is available with any contact material and can be UL recognized and
CSA certified. The PC pattern must clear switch support legs.
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
PC MOUNTING
.150" PITCH
7101MD9AV2BE
Horizontal Actuation
Actuator Shown In Pos. 1
SPDT
SECTION A-A
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
PC MOUNTING
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
7201MD9AV2BE
Vertical Actuation
DPDT
F
SECTION A-A
Actuator Shown In Pos. 1
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F–11
7000 Series
Miniature Toggle Switches
TERMINATIONS
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
7301MD9AV2BE
Vertical Actuation
Actuator Shown In Pos. 1
SECTION A-A
3PDT
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
PC MOUNTING
7401MD9AV2BE
Vertical Actuation
Actuator Shown In Pos. 1
SECTION A-A
4PDT
Not available with I seal option.
Terminal bend radii and lead-in manufacturing option.
V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Dim ‘A’
Snap-In
7101MD9__BE
OPTION
CODE
SPDT
DIM ‘A’
V2, V21
V6
.555 (14,10)
.460 (11,68)
.630 (16,00)
.953 (24,21)
Actuator Shown In Pos. 1
Not available with I seal option.
V7, V71
V8, V81
F
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F–12
7000 Series
Miniature Toggle Switches
TERMINATIONS
PC MOUNTING
V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V61, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN
Dim ‘A’
OPTION
CODE
DIM ‘A’
7201MD9__BE
Snap-In
DPDT
V2, V21
V6, V61
V7, V71
V8, V81
.555 (14,10)
.460 (11,68)
.630 (16,00)
.953 (24,21)
Actuator Shown In Pos. 1
Not available with I seal option.
V2, V7, V8 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
V21, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN
Dim ‘A’
7301MD9__BE
3PDT
OPTION
CODE
DIM ‘A’
Snap-In
V2, V21
V7, V71
V8, V81
.555 (14,10)
.630 (16,00)
.953 (24,21)
Actuator Shown In Pos. 1
Not available with I seal option.
PC MOUNTING
V2, V7, V8 VERTICAL MOUNT, V-BRACKET
V21, V71, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN
Dim ‘A’
OPTION
CODE
7401MD9__BE
DIM ‘A’
4PDT
Snap-In
V2, V21
V7, V71
V8, V81
.555 (14,10)
.630 (16,00)
.953 (24,21)
F
Actuator Shown In Pos. 1
Not available with I seal option.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F–13
7000 Series
Miniature Toggle Switches
TERMINATIONS
V3, V4, V9 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
V31, V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN
Dim ‘A’
OPTION
CODE
DIM ‘A’
Snap-In
V3, V31
V4, V41
V9
.460 (11,68)
.630 (16,00)
1.150 (29,21)
7101MD9__BE
SPDT
Actuator Shown In Pos. 1
Not available with I seal option.
V3, V4, V9 VERTICAL MOUNT, V-BRACKET
V31, V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Dim ‘A’
7201MD9__BE
DPDT
OPTION
CODE
Snap-In
DIM ‘A’
V3, V31
V4, V41
V9
.460 (11,68)
.630 (16,00)
1.150 (29,21)
Actuator Shown In Pos. 1
Not available with I seal option.
V4, V9 VERTICAL MOUNT, V-BRACKET
V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN
PC MOUNTING
Dim ‘A’
7301MD9__BE
3PDT
OPTION
CODE
DIM ‘A’
Snap-In
F
V4, V41
V9
.630 (16,00)
1.150 (29,21)
Actuator Shown In Pos. 1
Not available with I seal option.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F–14
7000 Series
Miniature Toggle Switches
TERMINATIONS
V4, V9 VERTICAL MOUNT, V-BRACKET
PC MOUNTING
V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN
Dim 'A'
7401MD9__BE
4PDT
Snap-In
OPTION
CODE
DIM ‘A’
Actuator Shown In Pos. 1
V4, V41
V9
.630 (16,00)
Not available with I seal option.
1.150 (29,21)
CONTACT MATERIAL
OPTION
CODE
CONTACT
MATERIAL
TERMINAL
PLATING
RATINGS
B
P
Q
S
1
GOLD
1
LOW LEVEL/
6
GOLD
0.4 VA MAX. @ 20 V AC OR DC MAX.
MATTE-TIN
DRY CIRCUIT
5
SILVER
4,5
SILVER
POWER
5 AMPS @ 120 V AC OR 28 V DC; 2 AMPS @ 250 V AC.
6
6
MATTE-TIN
G
R
3
GOLD
GOLD OVER
LOW LEVEL/DRY
0.4 VA MAX @ 20 V AC OR DC MAX. OR 5 AMPS @ 120 V AC
OR 28 V DC; 2 AMPS @ 250 V AC.
2,3
MATTE-TIN
SILVER
CIRCUIT OR POWER
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
NOTE: Any models supplied with P, S, R, Q, B or G contact material are RoHS compliant.
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
END CONTACTS: Coin silver, with gold plate over nickel plate.
2
3
U11-U415 model numbers
S, R, or Q contact material.
with all options when ordered with G,
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
B contact material standard with all terminations except C, Z & Z3.
Q contact material standard with C, Z & Z3 terminations.
4
5
6
END CONTACTS: Coin silver, silver plated.
CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
TERMINALS: Copper alloy, with matte tin alloy nickel plate.
P, S & R contact materials not available with Z & Z3 terminations.
F
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F–15
7000 Series
Miniature Toggle Switches
SEAL
E
EPOXY SEAL
I
EPOXY POTTED BASE
NO.
POLES
DIM ‘A’
Dim. 'A'
SP
DP
3P
4P
.410 (10,41)
.440 (11,18)
.505 (12,83)
.505 (12,83)
Compatible with “bottom-wash” PC board cleaning methods.
Available with C, W-W5, Z & Z3 terminations only.
AVAILABLE HARDWARE
Cap
Cap
Cap
.312
(7,92)
.383
(9,73)
.687
(17,45)
PART NO.
PART NO.
PART NO.
896801000 WHITE
896802000 BLACK
896803000 RED
763701000 WHITE
763702000 BLACK
763703000 RED
706201000 WHITE
706202000 BLACK
706203000 RED
Material: Polyethylene
Finish: Matte
Material: Vinyl
Finish: Matte
Material: Vinyl
Finish: Matte
Fits Z3 Termination
female connector
L41 Lever handle
L42 Lever handle
.477
(12,12)
.777
(19,74)
NOTE: Additional nuts, locking rings
and lockwashers available
separately, see Section N.
PART NO.
PART NO.
PART NO.
481001000 WHITE
481002263 BLACK
481003000 RED
481101000 WHITE
481102263 BLACK
481103000 RED
530100000
Available in loose pieces.
704D02000 Sealing Boot
16 [0.630]
Other colors available, consult
Customer Service Center.
Material: Nylon
Finish: Matte
Material: Nylon
Finish: Matte
759D02000 Sealing Boot
703D02000 Sealing Boot
.331 (8,4)
ø
2 [0.079]
ø .331 (8,4)
.464 (11,79)
.524 (13,3)
F
15/32-32 NS-2A
1/4-40 uns-2A nut
15/32-32, NS-2A
NOTE: For use with T, TP and T2P style actuators. Can not
be used for Switch Functions: 7103, 7203, 7303, 7403,
7107, 7207, 7307, and 7407.
NOTE: For use with T and TP style actuators. Can
not be used for Switch Functions: 7103, 7203,
7303, 7403, 7107, 7207, 7307, 7407.
NOTE: For use with S actuator style when combined
with D, H, H3, Y, and Y4 bushings
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F–16
7101K2Y9AW1PE 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
7101K2Y9CBE | CK-COMPONENTS | 7000 Series Miniature Toggle Switches | 获取价格 | |
7101K2Y9CPE | CK-COMPONENTS | 7000 Series Miniature Toggle Switches | 获取价格 | |
7101K2Y9CQE | CK-COMPONENTS | 7000 Series Miniature Toggle Switches | 获取价格 | |
7101K2Y9V21BE | CK-COMPONENTS | 7000 Series Miniature Toggle Switches | 获取价格 | |
7101K2Y9V21PE | CK-COMPONENTS | 7000 Series Miniature Toggle Switches | 获取价格 | |
7101K2Y9V2BE | CK-COMPONENTS | 7000 Series Miniature Toggle Switches | 获取价格 | |
7101K2Y9V2PE | CK-COMPONENTS | 7000 Series Miniature Toggle Switches | 获取价格 | |
7101K2Y9V81BE | CK-COMPONENTS | 7000 Series Miniature Toggle Switches | 获取价格 | |
7101K2Y9V81PE | CK-COMPONENTS | 7000 Series Miniature Toggle Switches | 获取价格 | |
7101K2Y9V8BE | CK-COMPONENTS | 7000 Series Miniature Toggle Switches | 获取价格 |
7101K2Y9AW1PE 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6