S202041SS02NB 概述
S Series Slide Switches S系列滑动开关
S202041SS02NB 数据手册
通过下载S202041SS02NB数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载S Series
Slide Switches
Features/Benefits
Typical Applications
•
•
•
•
•
6 to 15 AMPS
•
•
•
Portable tools
Enclosed housing
PC and Snap-in panel mounting
Reversing option
Small appliances
Floor care products
RoHS compliant
Models Available
Specifications
Materials
CONTACT RATING: Q contact material (S1XX, S2XX Models):
6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @
125 V DC (UL/CSA). (S5XX, S6XX Models): 12 AMPS @
125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA).
(S7XX, S8XX Models): 15 AMPS @ 125 V AC; 6AMPS @
250 V AC (UL/CSA). See page J-31 for additional ratings.
HOUSING: 6/6 nylon (UL94V-2), black.
I
TOP PLATE: 6/6 nylon (UL94V-2), black.
ACTUATOR: 6/6 nylon (UL94V-2), black (standard).
CONTACTS: Q contact material: Copper, silver plated. See page
I-31 for additional contact materials.
TERMINALS: Q contact material: Copper, silver plated. See page
I-31 for additional contact materials.
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ω typ. initial
CONTACT SPRING: Music wire or stainless steel.
TERMINAL SEAL: Epoxy.
@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
9
INSULATION RESISTANCE: 10 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: -30ºC to +65ºC
STORAGE TEMPERATURE: -30ºC to +85ºC
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages I–29 through I–32. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
S101 SPST, 6 AMPS
S202 (DPDT, 6 AMPS
S802 DPDT, 15 AMPS
S102 SPDT, 6AMPS
Actuator
03 .335" high
04 .500" high
09 .250" high
12 Screwdriver slot
(with marking)
13 Screwdriver slot
(without marking)
C2 Black cap
S112 SPDT, mom., 6 AMPS
Detent
S201 DPST, 6 AMPS
S602 DPDT, 12 AMPS
S701 SPST, 15 AMPS
S702 SPDT, 15 AMPS
1
2
With detent
Without detent
Mounting Style
SS Panel with mounting ears
MS PC thru-hole
C3 Red cap
S2 Snap-in panel with blacktop plate
TS Panel with mounting ears
C5 Yellow cap
Terminations
03 Solder lug with hole
02 PC Thru-hole
04 PC Thru-hole
07 Quick connect
08 PC Thru-hole
WC Wire lead
Housing Markings
NONE No markings
D
L
ON-OFF
ON
M ON-OFF
N
Red rectangle on one end
Contact Material
Q
B
G
Silver
Gold
Gold over silver
Seal
NONE No seal
E
Epoxy seal
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
I–28
S Series
Slide Switches
SWITCH FUNCTION
AVAILABLE
MOUNTING
STYLES
AVAILABLE
MOUNTING
STYLES
NO.
POLES
MODEL
NO.
AMP
RATING
SWITCH
FUNCTION
NO.
POLES
MODEL
NO.
AMP
RATING
SWITCH
FUNCTION
SCHEMATIC
SCHEMATIC
S101
S201
6
DPST
MS,SS,TS
6
6
SPST
SS
SPDT
MS,SS
S102
S112
S701
S702
SP
S202
S602
S802
6
DPDT
DPDT
DPDT
MS,SS, TS
MS,SS, TS
6
SPDT-MOM.
SPST
MS,SS
DP
15
15
S1,S2,S3,ST
S1,S2,S3,ST
12
15
I
SPDT
S1,S2,S3,ST
SPST
DPDT
Part number shown: S202031SS03Q
Part number shown: S101031SS03Q
NOTE: and MOM. in table indicates momentary action.
All models with all options when ordered with ‘G’ or ‘Q’ contact material.
Contacts make on side actuator thrown.
ACTUATOR
03 .335" HIGH
04 .500" HIGH
09 .250" HIGH
12 SCREWDRIVER SLOT
13 SCREWDRIVER SLOT
(WITH MARKING)
(WITHOUT MARKING)
NOTE: Standard actuator color is black, other colors available, consult Customer Service Center. Alternate heights
are available with ‘03, 04 and 09’ actuators, consult Customer Service Center. Models with S2 mounting style,
subtract .090 (2, 29). Actuators ‘12’ and ‘13’ are available with DPST and DPDT models only.
White 115-230 markings (std.).
Without markings.
C2; C3; C5 SNAP-ON CAP
NOTE: Actuator finish: matte.
If no color is specified, black will be
supplied. Colored actuator caps may
also be ordered separately and user
installed, see page I-32.
OPTION
CODE2
C1-CT CAP
COLOR
C2
C3
C5
BLACK
RED
YELLOW
Available with S2 mounting
style only.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
I–29
S Series
Slide Switches
DETENT
1
2
WITH DETENT
Standard with all maintained models: S101, S102, S201, S202, S602, S701, S702, and S802.
WITHOUT DETENT
Standard with all momentary models: S112.
MOUNTING STYLE
SS PANEL WITH MOUNTING EARS
I
PANEL MOUNTING
AVAILABLE WITH:
Models: S101, S102, S112,
S201, S202 and S602
Terminations: All except 08
Actuators: 03, 04, 09, 12*
and 13*.
*12 and 13 actuators not
available with S1XX models.
S202031SS03Q
DPDT
MS PC THRU-HOLE
AVAILABLE WITH:
Models: S101, S102, S112,
S201, S202, S602
Terminations: 02, 04 and 08
Actuators: 03, 04, 09, 12* and 13*
*12 and 13 actuators available with
S201, S202 and S602 models only.
PC MOUNTING
For mounting information, see
TERMINATIONS section, page I-31.
S202031MS02Q
DPDT
S2 SNAP-IN PANEL
PANEL MOUNTING
S802C21S207Q
PANEL THICKNESS:
.020(0,57)–.200(5,08)
DPDT
AVAILABLE WITH:
Models: S701, S702,
and S802
Terminations: 04, 07, 57 and WC
Actuators: C2, C3, C5 and 03
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
I–30
S Series
Slide Switches
MOUNTING STYLE
TS PANEL WITH MOUNTING EARS
PANEL MOUNTING
S202031TS03Q
DPDT
AVAILABLE WITH:
Models: S201, S202, and S602
Terminations: All
Actuators: 03, 04 and 12.
I
TERMINATIONS
03 SOLDER LUG WITH HOLE
02 PC THRU-HOLE
04 PC THRU-HOLE
PC MOUNTING
02 & 04 terminations
Recommended with ‘MS’
mounting style only.
Recommended with double pole
models only.
07 QUICK CONNECT
08 PC THRU-HOLE
WC WIRE LEAD
.113 .015
(2,87 0,38)
.118 .015
(3,00 0,38)
08 terminations
with MS mounting style.
.368 .015
(9,35 0,38)
.140
(3,56)
.503 .015
(12,78 0,38)
18 AWG wire for S1XX and S2XX models.
16 AWG wire for all other models. Black
wire standard, other colors and lengths
available, consult Customer Service Center.
UL style 1015.
MS mounting style only.
NOTE: All terminals on S1XX, S2XX and S6XX models are .020 (0,51) thick;
all terminals on S7XX and S8XX models are .031 (0,79) thick.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
I–31
S Series
Slide Switches
TOP PLATE MARKINGS
NONE NO MARKINGS
D
ON-OFF
L
ON
M
ON-OFF
N
RED RECTANGLE ON ONE END
NOTE: Top plate markings are available with ‘S2’ mounting style only. The marking color
Note: Orientation of
on all top plates with marking options ‘D, L and M’ is white, standard. (except white top plates: marking
color is black, standard). The marking color on all top plates with ‘N’ marking option is red, standard.
Other marking colors are available, consult Customer Service Center.
actuator markings
and terminals.
I
CONTACT MATERIAL
OPTION
CODE
CONTACT
MATERIAL
RATINGS
S1XX, S2XX MODELS: 6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC;
1 AMP @ 125 V DC (UL/CSA).
S6XX MODELS: 12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC;
1 AMP @ 125 V DC (UL/CSA).
S7XX, S8XX MODELS: 15 AMPS @ 125 V AC; 6 AMPS @
250 V AC (UL/CSA).
2
Q
B
G
SILVER
POWER
1
LOW LEVEL/DRY CIRCUIT
GOLD
0.4 VA MAX. @20 V AC OR DC max.
S1XX, S2XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR
6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC
(UL/CSA).
S6XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR
12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC
(UL/CSA).
GOLD OVER
LOW LEVEL/DRY
3
SILVER
CIRCUIT OR POWER
S7XX, S8XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR
15 AMPS @ 125 V AC; 6 AMPS @ 250 V AC (UL/CSA).
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant.
All models with all options when ordered with ‘G’ or ‘Q’ contact material.
2
3
CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options).
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate.
NOTE: ‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials.
SEAL
NONE NO SEAL
E
EPOXY SEAL
EPOXY
.075 MAX.
(1,91)
AVAILABLE HARDWARE
Cap, C2; C3 actuators
Cap, 03 actuator
PART NO.
PART NO.
121160100 WHITE
121160200 BLACK
121160300 RED
121000101 WHITE
121000102 BLACK
121000103 RED
Material: 6/6 Nylon
Finish: Matte
Material: 6/6 Nylon
Finish: Gloss
NOTE: Other cap colors available, consult Customer Service Center.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
I–32
S202041SS02NB 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
S202041SS02NG | CK-COMPONENTS | S Series Slide Switches | 获取价格 | |
S202041SS02NQ | CK-COMPONENTS | S Series Slide Switches | 获取价格 | |
S202041SS02NQE | CK-COMPONENTS | S Series Slide Switches | 获取价格 | |
S202041SS03DB | CK-COMPONENTS | S Series Slide Switches | 获取价格 | |
S202041SS03DG | CK-COMPONENTS | S Series Slide Switches | 获取价格 | |
S202041SS03DQ | CK-COMPONENTS | S Series Slide Switches | 获取价格 | |
S202041SS03DQE | CK-COMPONENTS | S Series Slide Switches | 获取价格 | |
S202041SS03G | ITT | Slide Switch, DPDT, Latched, 1A, 125VDC, Solder Terminal, Panel Mount, ROHS COMPLIANT | 获取价格 | |
S202041SS03GE | ITT | Slide Switch, DPDT, Latched, 1A, 125VDC, Solder Terminal, Panel Mount, ROHS COMPLIANT | 获取价格 | |
S202041SS03LB | CK-COMPONENTS | S Series Slide Switches | 获取价格 |
S202041SS02NB 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6