TP12MS9AVBE12 [CK-COMPONENTS]

Tiny Pushbutton Switches;


型号：	TP12MS9AVBE12
厂家：	C&K COMPONENTS
描述：	Tiny Pushbutton Switches 开关
文件：	总6页 (文件大小：429K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TP Series

Tiny Pushbutton Switches

Features/Benefits

Typical Applications

•

Subminiature size—capable of

switching 1 AMP

•

Telecommunications and

networking equipment

•

Vertical & right angle terminations

PC & panel mount models

•

Computers and peripherals

Instrumentation and controls

Snap-in front panel mounting available

Epoxy terminal seal-compatible with

bottom wash cleaning

•

RoHS compliant models available

Models Available

Specifications

Materials

CONTACT RATING: B contact material: 0.4 VA max. @

20 V AC or DC max. Q contact material: 1 AMP @

CASE: Glass filled nylon 4/6 or 6/6, flame retardant, heat stabilized

or diallyl phthalate (DAP), (UL 94V-0).

120 V AC or 28 V DC. See page A-19 for additional ratings.

PLUNGER: Thermoplastic polyester (UL 94V-0).

ELECTRICAL LIFE: TP11, TP21 MODELS: 60,000 make-and-break

cycles at full load. TP12 MODELS: 30,000 cycles.

CAP & FRAME: Nylon, black standard.

BUSHING: Brass, nickel plated.

CONTACT RESISTANCE: Below 20 mΩ typ. initial @

HOUSING: Stainless steel.

2-4 V DC, 100 mA, for both silver and gold plated contacts.

SWITCH SUPPORT: Brass, matte-tin plated.

INSULATION RESISTANCE: 10 Ω min.

END CONTACTS: B contact material: Copper alloy, with gold plate

over nickel plate. Q contact material: Coin silver, silver plated.

See page A-19 for additional contact materials.

DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.

OPERATING TEMPERATURE: –30ºC to 85ºC.

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

CENTER CONTACT & ALL TERMINALS: B contact material: Copper

alloy, with gold plate over nickel plate. Q contact material:

Copper alloy, silver plated. See page A-19 for additional

contact materials.

NOTE: Any models supplied with Q, B, P, R or G contact material are RoHS compliant.

NOTE: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

TERMINAL SEAL: Epoxy. Refer to soldering and cleaning in

Technical Data Chapter

HARDWARE: Nut & Locking Ring: Brass nickel plated.

Lockwasher: Steel, nickel plated.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown

and described on pages A-16 thru A-20. For additional options not shown in catalog, consult Customer Service Center. All

models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.

Switch Function

TP11 SPST Off-Mom.

TP12 SPDT On-Mom.

TP21 DPST Off-Mom.

Actuator or Bushing

SH .155" high plunger, threaded,

Seal

Terminations

.220" high bushing, flat

SH8 .155" high plunger, unthreaded,

.220" high bushing, round

SH9 .155" high plunger, unthreaded,

.220" high bushing, flat

Epoxy

Right angle, PC thru-hole

PC Thru-hole

Solder lug

Cap Color

AV Vertical right angle, PC thru-hole

V3 Vertical mount, v-bracket

Black

NONE Models with no cap

White

J81 Snap-in with frame

Wire wrap

.215" high plunger, threaded,

.310" high bushing, flat

Contact Material

LT9 .215" high plunger, unthreaded,

.310" high bushing, flat

MS9 .130" high plunger,

.020" high bushing, round

Gold

Gold, matte-tin

Silver

Gold over silver

Gold over silver, matte-tin

Frame Color

Black

NONE Models with no frame

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

A-15

TP Series

Tiny Pushbutton Switches

SWITCH FUNCTION

POS. 1 POS. 2

CONNECTED TERMINALS

POS. 1 POS. 2

NO.

POLES

MODEL

NO.

C&K marking on opposite side

SCHEMATIC

TP11

TP12

OFF

MOM.

OPEN

2-1

1-3

2-3

SPST

SPDT

Omit terminal 2 for

TP11 models.

Terminal Nos.

For Reference Only

Part number shown: TP12SHZQE

OFF

MOM.

OPEN

1-3,4-6

TP21

DPST

Terminal Nos.

For Reference Only

Part number shown: TP21SHZQE

MOM. = Momentary

All models

with all options when ordered with G, Q or R contact material.

CAP COLOR

ACTUATOR—SNAP-IN FRONT MOUNT

ACTUATOR OR BUSHING

FRAME COLOR

J81 SNAP-IN WITH FRAME

OPTION

CODE

CAP COLOR

PANEL MOUNTING

BLACK

WHITE

OPTION

CODE

FRAME COLOR

BLACK

No Frame Color (J80 option)

NONE

Cap and Frame Finish: matte. Other colors

available, consult Customer Service Center.

NOTE: Available with Z, C, or W terminations.

NOTE: Caps & frames available separately, see page A-20.

Third Angle

Projection

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

A-16

TP Series

Tiny Pushbutton Switches

SH .155" HIGH PLUNGER,

.220" HIGH BUSHING,

THREADED, FLAT

SH8 .155" HIGH PLUNGER,

.220" HIGH BUSHING,

UNTHREADED

SH9 .155" HIGH PLUNGER,

LT .215" HIGH PLUNGER, MS9 .130" HIGH

.220" HIGH BUSHING,

UNTHREADED, FLAT

.310" HIGH BUSHING,

THREADED

PLUNGER

LT9 .215" HIGH PLUNGER,

.310" HIGH BUSHING,

UNTHREADED

Not available with

Z terminations.

Standard with Z, C, W terminations.

Standard with A, AV, V3 terminations.

† Subtract .016 (0,41) for models with A, AV or V3 terminations.

NOTE: Caps available for plunger options, see page A-20.

PANEL MOUNTING

10-48 BUSHING

1/4 IN. BUSHING

Without locking ring

With standard locking ring

Without locking ring

With standard locking ring

NOTE: One mounting nut, locking ring and lockwasher supplied standard with 10-48 threaded bushings (two nuts with 1/4-40 bushings).

Optional mounting nut and locking ring styles and finishes available separately, see section “Technical Data and Additional Hardware”.

TERMINATIONS

WIRE WRAP

PC THRU-HOLE

SOLDER LUG

PC MOUNTING

Not available with MS9 bushing or P

or R contact material.

Omit center holes

for TP11 models

Third Angle

Projection

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

A-17

TP Series

Tiny Pushbutton Switches

TERMINATIONS

RIGHT ANGLE, PC THRU-HOLE

PC MOUNTING

TP12SH9ABE

SPDT

TP11 Models:

omit terminal 2.

TP11 Models:

omit hole 2.

RIGHT ANGLE, PC THRU-HOLE

PC MOUNTING

TP21SH9ABE

DPST

AV VERTICAL RIGHT ANGLE, PC THRU-HOLE

PC MOUNTING

TP12SH9AVBE

SPDT

TP11 Models:

omit hole 2.

TP11 Models:

omit terminal 2.

NOTE: Terminal bend radii and lead-in manufacturing option.

AV VERTICAL RIGHT ANGLE, PC THRU-HOLE

PC MOUNTING

TP21SH9AVBE

DPST

NOTE: Terminal bend radii and lead-in manufacturing option.

Third Angle

Projection

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

A-18

TP Series

Tiny Pushbutton Switches

TERMINATIONS

V3 VERTICAL MOUNT, V-BRACKET

PC MOUNTING

TP11 Models:

omit hole 2.

TP12SH9V3BE

SPDT

TP11 Models:

omit terminal 2.

V3 VERTICAL MOUNT, V-BRACKET

PC MOUNTING

TP21SH9V3BE

DPST

CONTACT MATERIAL

OPTION

CODE

CONTACT

MATERIAL

TERMINAL

PLATING

RATINGS

GOLD

LOW LEVEL/DRY CIRCUIT

0.4 VA MAX. @ 20 V AC OR DC MAX.

1 AMP @ 120 V AC OR 28 V DC.

MATTE-TIN

4,5

SILVER

POWER

SILVER

GOLD

2,3

0.4 VA MAX @ 20 V AC OR DC MAX. OR

1 AMP @ 120 V AC OR 28 V DC.

GOLD OVER SILVER

LOW LEVEL/DRY CIRCUIT OR POWER

MATTE-TIN

* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.

CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.

END CONTACTS: Coin silver, with gold plate over nickel plate.

NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant.

All models

with all options when ordered with R, G, or Q contact material.

CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate

over nickel plate.

B contact material standard with A, AV, V3 & W terminations.

Q contact material standard with C & Z terminations

P, R contact materials not available with Z terminations.

END CONTACTS: Coin silver, silver plated.

CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.

TERMINALS: Copper alloy, with matte-tin over nickel plate.

SEAL

EPOXY SEAL

Third Angle

Projection

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

A-19

TP Series

Tiny Pushbutton Switches

AVAILABLE HARDWARE

Cap, .100" DIA. Plungers

(Recommended for S9 plunger)

Cap, .100" DIA. Plungers

PART NO.

508101000 WHITE

508102000 BLACK

538701000 WHITE

538702000 BLACK

465801000 WHITE

465802000 BLACK

Material: Nylon

Finish: Gloss

Material: Nylon

Finish: Gloss

Material: Nylon

Finish: Gloss

Cap, .120" DIA. Plungers

Cap, J81 option only

( .301

.090

)

1.000° MAX.

DRAFT

R.015

R.012

.005

.250

.065

.120

.310

CAVITY ID

TUNNEL GATE AS CLOSE

AS POSSIBLE TO THIS SURFACE.

6X 45 ° X .010 CHAMFER

OR .010 R. LEAD IN

PART NO.

708901000 WHITE

708902000 BLACK

484601000 WHITE

484602000 BLACK

798201000 WHITE

798202263 BLACK

891D01000 WHITE

891D02000 BLACK

Material: Nylon

Finish: Gloss

Material: Nylon

Finish: Gloss

Material: Nylon

Finish: Matte

Material: Nylon

Finish: Gloss

NOTE: Additional nuts, locking rings and lockwashers available separately, see section “Technical Data and Additional Hardware”.

Other cap colors available, consult Customer Service Center.

TYPICAL APPLICATION

Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC

mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and

frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.

.047" (1,19) PANEL THK.

.062" (1,57) PANEL THK.

.090" (2,29) PANEL THK.

.125" (3,18) PANEL THK.

PART NO.

432502263

432602263

432702263

432802263 BLACK

PANEL MOUNTING

For part numbers

4825ꢀ22ꢂ8, 482ꢂꢀ22ꢂ8

4827ꢀ22ꢂ8, 482ꢁꢀ22ꢂ8

.ꢀꢀ5 R.

(ꢀ,183

MAX. TYP.

.ꢀꢀ5 R.

(ꢀ,183

MAX. TYP.

.495 .5ꢀ5

(12,57 12,ꢁ83

.495 .5ꢀ5

(12,57 12,ꢁ83

.595 .ꢂꢀ5

(15,11 15,873

.ꢂ2ꢀ .ꢂ25

(15,75 15,ꢁꢁ3

Panel Inserts

Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for

indicator light assembly. Order insert separately from frame. Blank insert panel (without hole

for LED) also available. LED not included.

PANEL INSERT

WITH HOLE FOR LED

BLANK PANEL INSERT

WITHOUT HOLE FOR LED

PART NO.

894902000

476602000 BLACK

Third Angle

Projection

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ck-components.com

A-20

TP12MS9AVBE12 [CK-COMPONENTS]

相关型号：

TP12MS9AVBE2

TP12MS9AVBE22

TP12MS9AVBE22

TP12MS9AVGE12

TP12MS9AVGE22

TP12MS9AVKE

TP12MS9AVKE1

TP12MS9AVKE12

TP12MS9AVKE2

TP12MS9AVKE22

TP12MS9AVPE

TP12MS9AVPE1