LCA210S [CLARE]
Dual Pole OptoMOS Relays; 双杆OptoMOS继电![LCA210S](http://pdffile.icpdf.com/pdf1/p00071/img/icpdf/LCA210_374746_icpdf.jpg)
型号: | LCA210S |
厂家: | ![]() |
描述: | Dual Pole OptoMOS Relays |
文件: | 总6页 (文件大小:199K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
LCA210
Dual Pole OptoMOS® Relays
Description
LCA210
350
Units
V
The LCA210 is a common input 1-Form 2A solid state relay
which has two independent optically couple MOSFETS
controlled by a common input signal. The efficient MOS-
FET switches and photovoltaic die use Clare’s patented
OptoMOS® architecture to provide 3750 VRMS of input to
output isolation. The optically coupled input is controlled by
highly efficient GaAIAs infrared LEDs. Common input
OptoMOS relays can replace standard dual pole relays in
a variety of applications. The common input relay elimi-
nates the need to make an external circuit connection
when both poles are controlled by a common signal.
Load Voltage
Load Current
Max RON
85
35
mA
Ω
Features
• Small 8 Pin DIP Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 3750VRMS Input/Output Isolation
Approvals
• UL Recognized: File Number E76270
• CSA Certified: File Number LR 43639-10
• BSI Certified to:
• BS EN 60950:1992 (BS7002:1992)
Certificate #: 7344
• FCC Compatible
• VDE Compatible
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Surface Mount and Tape & Reel Versions Available
• BS EN 41003:1993
Certificate #: 7344
Ordering Information
Applications
Part #
LCA210
Description
8 Pin DIP (50/Tube)
• Telecom Switching
• Tip/Ring Circuits
LCA210S
LCA210STR
8 Pin Surface Mount (50/Tube)
8 Pin Surface Mount (1000/Reel)
• Modem Switching (Laptop, Notebook, Pocket Size)
• Hookswitch
• Dial Pulsing
• Ground Start
• Ringer Injection
Pin Configuration
• Instrumentation
• Multiplexers
LCA210 Pinout
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Switching Charcteristics of
Normally Open (Form A) Devices
DS-LCA210-R7
1
www.clare.com
LCA210
Absolute Maximum Ratings (@ 25˚ C)
Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
to the device. Functional operation of the device at these
or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings
for an extended period may degrade the device and effect
its reliability.
Parameter
Min
Typ Max Units
Input Power Dissipation
-
-
1501 mW
Input Control Current
Peak (10ms)
-
-
-
-
100 mA
1
5
A
V
Reverse Input Voltage
Total Power Dissipation
-
-
-
-
8002 mW
Isolation Voltage
Input to Output
3750
-40
-
-
-
-
V
RMS
Operational Temperature
Storage Temperature
+85
°C
-40
+125 °C
Soldering Temperature
DIP Package
Flatpack/Surface Mount
Package
-
-
-
-
+260 °C
+220 °C
(10 Seconds Max.)
Derate Linearly 1.33 mw/˚C
1
2
Derate Linearly 6.67 mw/˚C
Electrical Characteristics
Parameter
Conditions
Symbol
Min
Typ
Max
Units
Output Characteristics @ 25°C
Load Voltage (Peak)
Load Current (Continuous)
Peak Load Current
-
V
-
-
-
-
-
-
-
350
85
170
35
1
V
mA
mA
Ω
L
-
IL
10ms max
IL=85mA
ILPK
RON
ILEAK
-
On-Resistance
25
-
Off-State Leakage Current
V =350V
µA
L
Switching Speeds
Turn-On
Turn-Off
IF=8mA, V =10V
TON
TOFF
-
-
-
-
3
3
ms
ms
L
IF=8mA, V =10V
L
Output Capacitance
50V; f=1MHz
COUT
-
25
-
pF
*Input Characteristics @ 25°C
Input Control Current
Input Dropout Current
Input Voltage Drop
IL=120mA
IF
-
8
0.8
0.9
-
-
1.4
1.2
-
100
-
mA
mA
V
-
IF=8mA
-
V
1.4
5
F
Reverse Input Voltage
Reverse Input Current
Input to Output Capacitance
Input to Output Isolation
V
V
R
V =5V
IR
-
-
20
-
µA
pF
R
-
C
-
3
I/O
-
V
3750
-
-
V
I/O
RMS
*Input characteristics represent requirements of two parallel connected LEDs.
Rev. 7
2
www.clare.com
LCA210
PERFORMANCE DATA*
LCA210
LCA210
Typical LED Forward Voltage Drop
(N=50 Ambient Temperature = 25°C)
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 85mADC) IF=8mA
LCA210
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
I
= 8mADC
F
35
30
25
20
15
10
5
0
22.9 23.3 23.7 24.1 24.5 24.9 25.3
420 425 430 435 440 445
450
LED Forward Voltage Drop (V)
LCA210
On-Resistance (Ω)
Blocking Voltage (V)
LCA210
LCA210
Typical I for Switch Operation
F
Typical Turn-On Time
Typical I for Switch Dropout
F
(N=50 Ambient Temperature = 25°C)
(N=50 Ambient Temperature = 25°C)
(N=50 Ambient Temperature = 25°C)
(Load Current = 85mADC)
(Load Current = 85mADC; IF = 8mADC)
)
(Load Current = 85mADC
LED Current (mA)
Turn-On (ms)
LED Current (mA)
LCA210
LCA210
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 85mADC; IF = 8mADC)
LCA210
Typical Leakage vs. Temperature
(Measured across Pins 5 & 6 or 7 & 8)
Typical Load Current vs. Temperature
0.016
0.014
0.012
0.010
0.008
0.006
0.004
0.002
0
16mA
8mA
-40
-20
0
20
40
60
80
100
Temperature (°C)
Turn-Off (ms)
Temperature (°C)
LCA210
Typical Blocking Voltage
vs. Temperature
LCA210
LCA210
Typical Turn-On vs. Temperature
(Load Current = 40mADC)
Typical Turn-Off vs. Temperature
(Load Current = 40mADC)
430
425
420
415
410
405
400
395
8mA
16mA
8mA
32mA
-40
-20
0
20
40
60
80
100
Temperature (°C)
Temperature (°C)
Temperature (°C)
The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
Rev. 7
www.clare.com
3
LCA210
PERFORMANCE DATA*
LCA210
LCA210
LCA210
Typical Turn-On vs. LED Forward Current
(Load Current = 50mADC)
Typical LED Forward Voltage Drop
vs. Temperature
Typical Turn-Off vs. LED Forward Current
(Load Current = 50mADC)
50mA
30mA
20mA
10mA
Temperature (°C)
LED Forward Current (mA)
LCA210
LED Forward Current (mA)
LCA210
Typical I for Switch Operation
F
Typical I for Switch Dropout
F
LCA210
vs. Temperature
(Load Current = 50mADC)
vs. Temperature
(Load Current = 50mADC)
Typical On-Resistance vs. Temperature
(Load Current = Max Rated at Temperature)
8mA
16mA
Temperature (°C)
Temperature (°C)
Temperature (°C)
LCA210
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C)
IF = 8mADC
LCA210
Energy Rating Curve
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
10µs 100µs 1ms 10ms 100ms 1s
10s 100s
Load Voltage (V)
Time
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
Rev. 7
4
www.clare.com
LCA210
Mechanical Dimensions
8 Pin DIP Through Hole (Standard)
9.652 ± .381
(.380 ± .015)
PC Board Pattern
(Top View)
2.540 ± .127
2.540 ± .127
(.100 ± .005)
8-.800 DIA.
(.100 ± .005)
7.620 ± .254
(.300 ± .010)
(8-.031 DIA.)
7.620 ± .127
(.300 ± .005)
3.302
(.130)
9.144 ± .508
(.360 ± .020)
6.350 ± .127
(.250 ± .005)
6.350 ± .127
(.250 ± .005)
7.239 TYP.
(.285)
9.144 TYP.
(.360)
.457 ± .076
(.018 ± .003)
7.620 ± .127
(.300 ± .005)
8.077 ± .127
(.318 ± .005 )
9.652 ± .381
(.380 ± .015)
8 Pin DIP Surface Mount (“S” Suffix)
PC Board Pattern
(Top View)
2.540 ± .127
(.100 ± .005)
2.540 ± .127
(.100 ± .005)
7.620 ± .254
(.300 ± .010)
9.525 ± .254
(.375 ± .010)
3.302
(.130)
4.445 ± .127
(.175 ± .005)
6.350 ± .127
(.250 ± .005)
8.305 ± .127
(.327 ± .005)
1.905 ± .127
(.075 ± .005)
.635 TYP.
(.025)
.254 TYP.
(.010)
.457 ± .076
1.498 ± .127
(.059 ± .005)
(.018 ± .003)
8.077 ± .127
(.318 ± .005)
Tape and Reel Packaging for 8 Pin Surface Mount Package
2.007 ± .102 1.498 ± .102 3.987 ± .102
(.079 ± .004) (.059 ± .004) (.157 ± .004)
330.2 DIA.
6.731 MAX.
(.265)
(13.00)
1.753 ± .102
(.069 ± .004)
.406 MAX.
(.016)
Top Cover
Tape Thickness
.102 MAX.
(.004)
7.493 ± .102
(.295 ± .004)
16.002 ± .305
(.630 ± .012)
1
8
12.090
(.476)
10.300
(.405)
4.877
(.192)
Top Cover
Tape
.050R TYP.
11.989 ± .102
(.472 ± .004)
10.300 ± .102
(.405 ± .004)
1.549 ± .102
(.061 ± .004)
Embossed Carrier
User Direction of Feed
Embossment
Dimensions
mm
(inches)
Rev. 7
www.clare.com
5
Worldwide Sales Offices
CLARE LOCATIONS
EUROPE
ASIA PACIFIC
Clare Headquarters
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
European Headquarters
CP Clare nv
Bampslaan 17
B-3500 Hasselt (Belgium)
Tel: 32-11-300868
Fax: 32-11-300890
Asian Headquarters
Clare
Room N1016, Chia-Hsin, Bldg II,
10F, No. 96, Sec. 2
Chung Shan North Road
Taipei, Taiwan R.O.C.
Tel: 886-2-2523-6368
Fax: 886-2-2523-6369
Clare Micronix Division
145 Columbia
Aliso Viejo, CA 92656-1490
Tel: 1-949-831-4622
Fax: 1-949-831-4628
France
Clare France Sales
Lead Rep
99 route de Versailles
91160 Champlan
France
Tel: 33 1 69 79 93 50
Fax: 33 1 69 79 93 59
SALES OFFICES
AMERICAS
Germany
Clare Germany Sales
ActiveComp Electronic GmbH
Mitterstrasse 12
85077 Manching
Germany
Tel: 49 8459 3214 10
Fax: 49 8459 3214 29
Americas Headquarters
Clare
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
Italy
C.L.A.R.E.s.a.s.
Via C. Colombo 10/A
I-20066 Melzo (Milano)
Tel: 39-02-95737160
Fax: 39-02-95738829
Eastern Region
Clare
P.O. Box 856
Mahwah, NJ 07430
Tel: 1-201-236-0101
Fax: 1-201-236-8685
Toll Free: 1-800-27-CLARE
Sweden
Clare Sales
Comptronic AB
Box 167
S-16329 Spånga
Tel: 46-862-10370
Fax: 46-862-10371
Central Region
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
http://www.clare.com
United Kingdom
Clare UK Sales
Marco Polo House
Cook Way
Bindon Road
Taunton
UK-Somerset TA2 6BG
Tel: 44-1-823 352541
Fax: 44-1-823 352797
Western Region
Clare
1852 West 11th Street, #348
Tracy, CA 95376
Tel: 1-209-832-4367
Fax: 1-209-832-4732
Toll Free: 1-800-27-CLARE
Clare cannot assume responsibility for use of any circuitry other
than circuitry entirely embodied in this Clare product. No circuit
patent licenses nor indemnity are expressed or implied. Clare
reserves the right to change the specification and circuitry, with-
out notice at any time. The products described in this document
are not intended for use in medical implantation or other direct life
support applications where malfunction may result in direct phys-
ical harm, injury or death to a person.
Canada
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Specification: DS-LCA210-R7
©Copyright 2001, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
1/12/01
相关型号:
©2020 ICPDF网 联系我们和版权申明