PAA140LS [CLARE]
Dual Pole OptoMOS Relays; 双杆OptoMOS继电型号: | PAA140LS |
厂家: | CLARE |
描述: | Dual Pole OptoMOS Relays |
文件: | 总6页 (文件大小:128K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PAA140L
Dual Pole OptoMOS® Relays
Description
PAA140L
400
Units
V
PAA140L is a 2-Form-A solid state relay which uses
optically coupled MOSFET technology to provide
3750V of input to output isolation. The efficient MOS-
FET switches and photovoltaic die use Clare’s
patented Optomos architecture. The optically-coupled
input is controlled by a highly efficient GaAIAs
infrared LED. The PAA140L also contains a built in
load current limiting feature. This combined with a
low on resistance and very high load current handling
capabilities makes it suitable for a variety of high per-
formance switching applications.
Load Voltage
Load Current
Max RON
200
13
mA
Ω
Features
• Small 8 Pin DIP Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 3750VRMS Input/Output Isolation
• No EMI/RFI Generation
Approvals
These products comply with the requirements of:
• Machine Insertable, Wave Solderable
• Surface Mount and Tape & Reel Versions Available
• Current Limiting
• UL 1577 (UL recognized file #E76270)
• CSA #14 (CSA certified file #LR43639)
• EN 60950
• IEC 950
• AS/NZS 3260
Applications
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket
Size)
• Hookswitch
• Dial Pulsing
• Ground Start
Ordering Information
Part #
Description
PAA140L
8 Pin DIP (50/Tube)
PAA140PL
PAA140PLTR
PAA140LS
PAA140LSTR
8 Pin Flatpack (50/Tube)
8 Pin Flatpack (1000/Reel)
8 Pin Surface Mount (50/Tube)
8 Pin Surface Mount (1000/Reel)
• Ringer Injection
• Instrumentation
• Multiplexers
Pin Configuration
• Data Acquisition
• Electronic Switching
• I/O Subsystems
PAA140L Pinout
AC/DC Configuration
1
8
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
+ Control - Switch #1
Load - Switch #1
2
3
7
6
– Control - Switch #1
Load - Switch #1
Load - Switch #2
+ Control - Switch #2
• Aerospace
• Industrial Controls
4
5
– Control - Switch #2
Load - Switch #2
Switching Characteristics of
Normally Open (Form A) Devices
DS-PAA140L-R1.0
1
www.clare.com
PAA140L
Absolute Maximum Ratings (@ 25˚ C)
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at these or
any other conditions beyond those indicated in the opera-
tional sections of this data sheet is not implied. Exposure
of the device to the absolute maximum ratings for an
extended period may degrade the device and effect its
reliability.
Parameter
Min Typ Max Units
Input Power Dissipation
Input Control Current
Peak (10ms)
Reverse Input Voltage
Blocking Voltage
-
-
-
-
-
-
-
-
-
-
-
-
1501 mW
50
1
mA
A
5
V
400
V
Total Power Dissipation
8002 mW
Isolation Voltage
Input to Output
Operational Temperature
Storage Temperature
Soldering Temperature
DIP Package
Flatpack/Surface Mount
Package
3750
-40
-40
-
-
-
-
VRMS
°C
+85
+125 °C
+260 °C
+220 °C
-
-
-
-
(10 Seconds Max.)
Derate Linearly 1.33 mw/˚C
1
2
Derate Linearly 6.67 mw/˚C
Electrical Characteristics
Parameter
Conditions
Symbol
Min
Typ
Max
Units
Output Characteristics @ 25°C
Load Current* (Continuous)
AC/DC Configuration
-
IL
ILPK
-
-
-
-
200
500
mA
mA
Peak Load Current
10ms
On-Resistance
AC/DC Configuration
Off-State Leakage Current
IL=200mA
VL=400V
RON
ILEAK
-
-
10
-
13
1
Ω
µA
Switching Speeds
Turn-On
Turn-Off
Load Current Limit
Output Capacitance
IF=5mA, VL=10V
IF=5mA, VL=10V
IF=5mA
TON
TOFF
ICL
-
-
-
-
-
5.0
3.0
380
-
ms
ms
mA
pF
240
-
50V; f=1MHz
COUT
65
Capacitance
Input to Output
-
-
-
3
-
pF
Input Characteristics @ 25°C
Input Control Current
Input Dropout Current
Input Voltage Drop
Reverse Input Voltage
Reverse Input Current
Input to Output Capacitance
IL= 200mA
IF
IF
VF
VR
IR
5
0.4
0.9
-
-
-
-
0.7
1.2
-
-
3
50
-
1.4
5
10
-
mA
mA
V
V
µA
pF
-
IF= 5mA
-
VR=5V
-
CI/O
*NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value.
Rev 1.0
2
www.clare.com
PAA140L
PERFORMANCE DATA*
PAA140L
PAA140L
Typical LED Forward Voltage Drop
(N=50 Ambient Temperature = 25°C; IF = 5mADC)
35
PAA140L
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 200mADC, IF = 5mADC)
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
35
30
25
20
15
10
5
35
30
25
20
15
10
5
30
25
20
15
10
5
0
0
0
1.17
1.19
1.21
1.23
1.25
430 442 454 466 478 490
502
5.03 5.38 5.73 6.08 6.43 6.78 7.13
LED Forward Voltage Drop (V)
Blocking Voltage (V)
On-Resistance (Ω)
PAA140L
PAA140L
PAA140L
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 200mADC)
Typical Turn-On Time
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
(Load Current = 200mADC)
(N=50 Ambient Temperature = 25°C)
(Load Current = 200mADC; IF = 5mADC)
25
20
15
10
5
25
20
15
10
5
25
20
15
10
5
0
0
0
1.5
2.1
2.7
3.3
3.9
4.5
5.1
0.9
1.5
2.1
2.7
3.3
3.9
4.5
0.39 0.65 0.91 1.17 1.43 1.69 1.95
LED Current (mA)
LED Current (mA)
Turn-On (ms)
PAA140L
PAA140L
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 200mADC; IF = 5mADC)
PAA140L
Typical Maximum Load
Current vs. Temperature
Typical Leakage vs. Temperature
(Measured across Pins 5 & 6 or 7 & 8)
300
250
200
150
100
50
25
0.12
0.10
0.08
0.06
0.04
0.02
0
20
15
10
5
One Pole Operating
Two Poles Operating
IF=10mA
IF=5mA
IF=10mA
IF=5mA
0
-40 -20
0
20
40
60
80 100 120
-40
-20
0
20
40
60
80
100
0.018 0.030 0.042 0.054 0.066 0.078 0.090
Temperature (°C)
Temperature (°C)
Turn-Off (ms)
PAA140L
Typical Turn-Off vs. Temperature
(Load Current = 250mADC)
PAA140L
Typical Turn-On vs. Temperature
(Load Current = 250mADC)
PAA140L
Typical Blocking Voltage vs. Temperature
485
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0
2.50
2.00
1.50
1.00
0.50
0
480
475
470
465
460
455
450
445
5mA
5mA
10mA
20mA
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80
100
Temperature (°C)
Temperature (°C)
Temperature (°C)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
Rev 1.0
www.clare.com
3
PAA140L
PERFORMANCE DATA*
PAA140L
PAA140L
Typical LED Forward Voltage Drop
vs. Temperature
PAA140L
Typical Turn-On vs. LED Forward Current
(Load Current = 200mADC)
Typical Turn-Off vs. LED Forward Current
(Load Current = 200mADC)
1.0
1.8
1.6
1.4
1.2
1.0
0.8
0.050
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0.045
0.040
0.035
0.030
0.025
0.020
0.015
0.010
0.005
0
50mA
10mA
5mA
0
5
10 15 20 25 30 35 40 45 50
-40 -20
0
20
40
60
80 100 120
0
5
10 15 20 25 30 35 40 45 50
LED Forward Current (mA)
Temperature (°C)
LED Forward Current (mA)
PAA140L
PAA140L
PAA140L
Typical On-Resistance vs. Temperature
Typical IF for Switch Operation vs. Temperature
Typical IF for Switch Dropout vs. Temperature
(Maximum rated load current; IF = 5mADC)
(Load Current = 150mADC)
(Load Current = 150mADC)
20
5.0
5.0
One Pole Operating
18
4.5
4.0
3.5
3.0
2.5
2.0
1.5
4.5
4.0
3.5
3.0
2.5
2.0
1.5
16
14
12
10
Two Poles Operating
8
6
4
2
0
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80
100
Temperature (°C)
Temperature (°C)
Temperature (°C)
PAA140L
PAA140L
Typical Load Current vs. Load Voltage
Energy Rating Curve
(Ambient Temperature = 25°C; IF = 5mADC)
1.2
1.0
0.8
0.6
0.4
0.2
0
250
200
150
100
50
0
-50
-100
-150
-200
-250
10µs 100µs 1ms 10ms 100ms 1s
10s 100s
-2.0 -1.5 -1.0 -0.5
0
0.5 1.0 1.5 2.0
Time
Load Voltage (V)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
Rev 1.0
4
www.clare.com
PAA140L
MECHANICAL DIMENSIONS
8 Pin DIP Through Hole (Standard)
9.652 .381
(.380 .015)
PC Board Pattern
(Top View)
2.540 .127
2.540 .127
(.100 .005)
8-.800 DIA.
(.100 .005)
7.620 .254
(.300 .010)
(8-.031 DIA.)
7.620 .127
(.300 .005)
3.302
(.130)
9.144 .508
(.360 .020)
6.350 .127
(.250 .005)
6.350 .127
(.250 .005)
7.239 TYP.
(.285)
9.144 TYP.
(.360)
.457 .076
(.018 .003)
7.620 .127
(.300 .005)
8.077 .127
(.318 .005 )
9.652 .381
(.380 .015)
8 Pin DIP Surface Mount (“S” Suffix)
PC Board Pattern
(Top View)
2.540 .127
(.100 .005)
2.540 .127
(.100 .005)
7.620 .254
(.300 .010)
9.525 .254
(.375 .010)
3.302
(.130)
4.445 .127
(.175 .005)
6.350 .127
(.250 .005)
8.305 .127
(.327 .005)
1.905 .127
(.075 .005)
.635 TYP.
(.025)
.254 TYP.
(.010)
.457 .076
1.498 .127
(.059 .005)
(.018 .003)
8.077 .127
(.318 .005)
9.652 .381
8 Pin Flatpack (“P” Suffix)
PC Board Pattern
(Top View)
(.380 .015)
2.540 .127
(.100 .005)
2.540 .127
(.100 .005)
7.620 .254
(.300 .010)
2.159 TYP.
(.085)
6.350 .127
(.250 .005)
9.398 .127
(.370 .005)
.203
(.008)
8.763 .127
(.345 .005)
2.286 MAX.
(.090)
.635 .127
(.025)
1.193
(.047)
.457 .076
(.018 .003)
8.077 .127
(.318 .005)
.787
(.031)
Dimensions
mm
(inches)
Rev 1.0
www.clare.com
5
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions
at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and
disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to sup-
port or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or
make changes to its products at any time without notice.
Specification: DS-PAA140L-R1.0
©Copyright 2002, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
8/23/02
相关型号:
©2020 ICPDF网 联系我们和版权申明