0805AF-472XJR_ [COILCRAFT]
Ferrite Chip Inductors â 0805AF;![0805AF-472XJR_](http://pdffile.icpdf.com/pdf2/p00324/img/icpdf/0805AF_1990663_icpdf.jpg)
型号: | 0805AF-472XJR_ |
厂家: | ![]() |
描述: | Ferrite Chip Inductors â 0805AF |
文件: | 总2页 (文件大小:346K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
Document 781-1
Ferrite Chip Inductors
–
0805AF (2012)
• Higher inductance values than ceramic 0805 inductors
• Inductance values from 0.11 µH to 22 µH
• Heavier guage wire for low DCR
• Ferrite construction for high current handling
Inductance2
5ꢀ (µH)
Impedance typ
(Ohms)
SRF typ4
(MHz)
DCR max5
(Ohms)
Irms6
(mA)
Color
code
Part number1
Qtyp3
0805AF-111XJR_
0805AF-681XJR_
0805AF-102XJR_
0805AF-122XJR_
0805AF-152XJR_
0.11 @7.9MHz
0.68 @7.9MHz
1.0 @7.9MHz
1.2 @7.9MHz
1.5 @7.9MHz
18 @7.9MHz
19 @7.9MHz
17 @7.9MHz
19 @7.9MHz
20 @7.9MHz
370 @500MHz
430 @100MHz
670 @100MHz
860 @100MHz
1000 @100MHz
1260
425
355
375
285
0.05
0.30
0.39
0.64
0.74
940
660
650
440
390
Brown
Orange
Yellow
Brown
Green
0805AF-182XJR_
0805AF-222XJR_
0805AF-272XJR_
0805AF-332XJR_
0805AF-472XJR_
1.8 @7.9MHz
2.2 @7.9MHz
2.7 @7.9MHz
3.3 @7.9MHz
4.7 @7.9MHz
20 @7.9MHz
19 @7.9MHz
19 @7.9MHz
19 @7.9MHz
18 @7.9MHz
1360 @100MHz
840 @50MHz
1050 @50MHz
1670 @50MHz
950 @25MHz
300
105
100
85
0.98
0.98
1.16
1.20
1.50
370
350
320
330
280
Blue
Brown
Violet
Gray
55
Black
0805AF-682XJR_
0805AF-103XJR_
0805AF-153XJR_
0805AF-223XJR_
6.8 @7.9MHz
10 @2.5MHz
15 @2.5MHz
22 @2.5MHz
18 @7.9MHz
18 @2.5MHz
17 @2.5MHz
17 @2.5MHz
450 @10MHz
740 @10MHz
1300 @10MHz
1620 @10MHz
37
26
20
21
1.90
2.20
4.25
6.70
240
230
150
120
Brown
Red
Yellow
Green
1. When ordering, please specify termination and packaging codes:
Designer’s Kit C450 contains 10 of each value
Core material Ferrite
Environmental RoHS compliant without exemption, halogen free
Terminations RoHS compliant matte tin over nickel over silver-
platinum-glass frit. Other terminations available at additional cost.
0805AF-103XJRC
Termination: R = RoHS compliant matte tin over nickel over silver-
platinum-glass frit.
Special order: Q = RoHS tin-silver-copper
(95.5/4/0.5) or P = non-RoHS tin-lead (63/37).
Weight 16.7– 18.0 mg
Ambient temperature –40°C to +85°C with Irms current
Maximum part temperature +100°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
2. Inductance measured at 0.1 Vrms, using Coilcraft SMD-A fixture
in Agilent/HP 4286A impedance analyzer with Coilcraft-provided
correlation pieces.
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
3. Q measured on Agilent/HP 4395A with Agilent/HP 16193 test fixture.
4. SRF measured using Agilent/HP 8753D network analyzer with Coilcraft
SMD-D test fixture.
5. DCR measured on Cambridge Technology Micro-ohmmeter.
6. Current that causes a 15°C temperature rise from 25°C ambient.This
information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000/7″reel; Plastic tape: 8 mm wide, 0.23 mm thick,
4 mm pocket spacing, 1.65 mm pocket depth
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Document 781-1 Revised 10/12/15
Document 781-2
Ferrite Chip Inductors – 0805AF Series
Typical L vs Frequency
Typical Q vs Frequency
100
30
22 µH
10 µH
25
6.8 µH
4.7 µH
3.3 µH
2.7 µH
2.2 µH
22 µH
10
20
15
10
0.11 µH
0.68 µH
1.5 µH
1.5 µH
1.0 µH
0.68 µH
6.8 µH
2.2 µH
3.3 µH
4.7 µH
10 µH 2.7 µH
1.0 µH
1
5
0
0.11 µH
1000
0.1
1
10
100
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
C
B
Typical Impedance vs Frequency
H
overall
D
Pick and
place
1000
I
J
I
F
G
F
material
A
100
10
1
E
Recommended
Land Pattern
Terminal wraparound:
approx 0.008/0,20 both ends
terminal
A
B
C
D
ref
max max max
E
F
G
H
I
J
0.090 0.068 0.060 0.020 0.050 0.016 0.040 0.070 0.040 0.030 inches
2,29 1,73 1,52 0,51 1,27 0,41 1,02 1,78 1,02 0,76 mm
0.1
Note: Height dimension (C) is before optional solder application.For maximum
height dimension including solder, add 0.006 in / 0,152 mm.
0.01
0.001
0.01
0.1
1
10
Frequency (GHz)
Document 781-2 Revised 10/12/15
相关型号:
©2020 ICPDF网 联系我们和版权申明