DA2099-ALB [COILCRAFT]
Datacom Transformer, GENERAL PURPOSE Application(s), 1:1, ROHS COMPLIANT;
| 型号： | DA2099-ALB |
| 厂家： | 
Coilcraft lnc. |
| 描述： | Datacom Transformer, GENERAL PURPOSE Application(s), 1:1, ROHS COMPLIANT 变压器 |
| 文件： | 总1页 (文件大小：150K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Document 519
For ON Semiconductor
NCP1652 and NCP4302
Gate Drive Transformer
• Designed for ON Semiconductor for use with the NCP1652
PFC Controller and the NCP4302 Flyback Controller.
• Requires only 1.5 cm2 of board space
• 1500 Vrms primary to secondary isolation
• Can be used from 20 kHz to 250 kHz.
Core material Ferrite
Terminations RoHS compliant tin-silver over tin over nickel over
phos bronze. Other terminations available at additional cost.
Weight 1.35 g
Ambient temperature –40°C to +125°C
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500/13″ reel; Plastic tape: 24 mm wide, 0.36 mm thick,
20 mm pocket spacing, 6.13 mm pocket depth
PCB washing Only pure water or alcohol recommended
Primary
Leakage
inductance3
max (µH)
Primary
DCR max
(Ohms)
Secondary
DCR max
(Ohms)
Volt-time
product4
(V-µsec)
Capacitance
pri to sec5
max (pF)
Part
Turns
ratio
inductance2
±20 % (mH)
number1
DA2099-AL_
1 : 1
3.79
13.0
2.30
2.85
221
13.0
1. When ordering, please specifypackaging code:
DA2099-ALD
Dot indicates pin 1
1
10
Packaging: D = 13″ machine ready reel. EIA-481 embossed plastic
tape (500 per full reel).
0.453
max
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
11,50
5
6
2. Inductance measured at 100 kHz, 0.3 Vrms, 0 Adc
0.512
13,00
3. Leakage inductance measured at 100 kHz, 0.3 Vrms with secondary
pins shorted.
max
4. Based on Bsat of the core at 25°C and number of turns of the primary.
5. Capacitance measured at 100 kHz, 0.3 Vrms.
6. Electrical specifications at 25°C.
0.256
max
6,50
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.004/0,10
0.063
1,60
0.079
2,00
0.394
10,00
6
5
5
1
10
6
0.028
0,70
Sec
Pri
0.079
2,00
1
10
0.063
1,60
Recommended
Land Pattern
inches
mm
Dimensions are in
Specifications subject to change without notice.
Please check our website for latest information.
Document519 Revised09/01/09
© Coilcraft, Inc. 2009
相关型号：
©2020 ICPDF网 联系我们和版权申明