EPL2010-181MSD [COILCRAFT]
General Purpose Inductor, 0.18uH, 20%, 1 Element, Ferrite-Core, SMD, 0808, CHIP, 0808;
| 型号： | EPL2010-181MSD |
| 厂家： | 
Coilcraft lnc. |
| 描述： | General Purpose Inductor, 0.18uH, 20%, 1 Element, Ferrite-Core, SMD, 0808, CHIP, 0808 |
| 文件： | 总2页 (文件大小：194K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Document 584-1
SMT Power Inductors
–
EPL2010 Series
• Smallest shielded power inductors; 2.0 × 2.0 × 1 mm high
• Extremely low DCR and very high SRF ratings
• Isat ratings as high as 2.9 A
Designer’s Kit C412 contains 5 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations Since August, 2008: RoHS compliant tin-silver-copper
over tin over nickel over silver. Prior to August, 2008: RoHS compliant
tin-silver-copper over gold over nickel over silver.
Weight 13 – 18 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 2000/7″reel; 7500/13″ reel Plastic tape: 8 mm wide,
0.28 mm thick, 4 mm pocket spacing, 1.3 mm pocket depth
PCB washing Only pure water or alcohol recommended
Isat (A)5
10% drop 20% drop 30% drop
Irms(A)6
20°Crise 40°Crise
Inductance2
±20% (µH)
DCR nom3 DCR max3
SRF typ4
(MHz)
Partnumber1
(Ohms)
(Ohms)
EPL2010-181ML_
EPL2010-271ML_
0.18
0.27
0.024
0.032
0.029
0.038
615
412
1.3
1.2
2.2
2.1
2.9
2.6
2.37
1.76
3.17
2.31
EPL2010-301ML_ This part number has been changed to EPL2010-271. The EPL2010-301 is not available
EPL2010-421ML_ 0.42 0.040 0.048 283 1.0 1.6
EPL2010-471ML_ This part number has been changed to EPL2010-421. The EPL2010-471 is not available
2.2
1.66
2.16
EPL2010-681ML_
EPL2010-821ML_
0.68
0.82
0.058
0.068
0.070
0.082
214
173
0.80
0.70
1.3
1.2
2.0
1.6
1.48
1.28
1.94
1.68
EPL2010-102ML_
EPL2010-152ML_
EPL2010-222ML_
EPL2010-332ML_
EPL2010-472ML_
1.0
1.5
2.2
3.3
4.7
0.099
0.141
0.202
0.272
0.429
0.119
0.155
0.222
0.299
0.472
145
102
80
63
50
0.65
0.60
0.43
0.35
0.30
1.0
1.35
1.30
1.05
0.85
0.65
1.04
1.36
1.04
0.978
0.879
0.680
0.95
0.78
0.63
0.47
0.799
0.751
0.671
0.527
EPL2010-682ML_
EPL2010-822ML_
EPL2010-103ML_
6.8
8.2
10
0.512
0.827
0.914
0.563
0.910
1.00
46
42
33
0.24
0.22
0.20
0.43
0.40
0.35
0.57
0.53
0.47
0.440
0.415
0.392
0.575
0.520
0.495
1. When ordering, please specify packaging code:
EPL2010-103MLC
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A network analyzer or equivalent.
5. DC current at which the inductance drops the specified amount from its
value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
Specifications subject to change without notice.
Please check our website for latest information.
Document584-1 Revised10/02/09
© Coilcraft, Inc. 2009
Document 584-2
SMT Power Inductors – EPL2010 Series
Typical L vs Frequency
Typical L vs Current
100
100
10 µH
10 µH
10
10
3.3 µH
3.3 µH
1.0 µH
1.0 µH
1
1
0.3 µH
0.3 µH
0.1
0.1
0.1
1
10
100
0.01
0.1
1
10
Frequency (MHz)
Current (A)
Part Marking
Current Derating
2nd
significant
digit
Multiplier
120
110
0.079 ±0.008
2,0 ±0,2
100
90
80
70
60
50
40
30
1st
significant
digit
0.079 ±0.008
2,0 ±0,2
0.041
1,05
max
Recommended
Land Pattern
20
0.057
1,45
Isat
Irms
Start
Finish
10
0
-40 -20
0
20
40
60
80
100 120 140
Ambient temperature (°C)
0.087
2,2
Part Marking (Parts manufactured prior to Oct. 20, 2009 may not be marked.)
Partnumber
Value
1st digit
Brown
Red
Yellow
Blue
Gray
Brown
Brown
Red
Orange
Yellow
Blue
2nd digit
Multiplier
0.014
0,35
0.041
1,04
EPL2010-181
EPL2010-271
EPL2010-421
EPL2010-681
EPL2010-821
EPL2010-102
EPL2010-152
EPL2010-222
EPL2010-332
EPL2010-472
EPL2010-682
EPL2010-822
EPL2010-103
0.18µH
0.27µH
0.42µH
0.68µH
0.82µH
1.0µH
1.5µH
2.2µH
3.3µH
4.7µH
6.8µH
8.2µH
10µH
Gray
Violet
Red
Gray
Red
Black
Green
Red
Orange
Violet
Gray
Red
Brown
Brown
Brown
Brown
Brown
Red
Red
Red
Red
Red
min
inches
mm
Dimensions are in
Small surface blemishes are not unusual and do not adversely affect performance.
Wire may be visible inside the voids.
Acceptable void sizes:
Top: 0.01 in / 0,254 mm × 0.01 in / 0,254 mm
Sides: 0.02 in / 0,5 mm × 0.047 in / 1,2 mm
Red
Red
Orange
Gray
Brown
Black
Note: Allmarkedpartshavethreedots. Blackdot, usedonlyon-102and-103
asthesecondsignificantdigit, maybeverydifficulttosee.
Specifications subject to change without notice.
Please check our website for latest information.
Document584-2 Revised10/02/09
© Coilcraft, Inc. 2009
相关型号：
©2020 ICPDF网 联系我们和版权申明