LPS3314-684MQB [COILCRAFT]
General Purpose Inductor, 680uH, 20%, 1 Element, Ferrite-Core, SMD, 1313, CHIP, 1313, HALOGEN FREE AND ROHS COMPLIANT;
| 型号： | LPS3314-684MQB |
| 厂家： | 
Coilcraft lnc. |
| 描述： | General Purpose Inductor, 680uH, 20%, 1 Element, Ferrite-Core, SMD, 1313, CHIP, 1313, HALOGEN FREE AND ROHS COMPLIANT 测试 功率感应器 电感器 |
| 文件： | 总2页 (文件大小：140K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Document 541-1
Shielded Power Inductors
–
LPS3314
• Very low DCR; excellent current handling
• Miniature 3.3 × 3.3 mm footprint; less than1.4 mm tall
Designer’s Kit C330 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Other terminations available at additional cost.
Weight 44.1 – 46.5 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reelpackaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth
Recommended pick and place nozzle OD: 3.3 mm; ID: ≤ 1.65 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Isat (A)5
Irms (A)6
1. Please, specify termination and packaging codes:
DCR SRF
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
20% (ꢀµ) (Ohms) (Mµz) drop drop drop rise rise
LPS3314-824MRC
Termination: R=RoHS compliant matte tin over
nickel over silver.
Part number1
LPS3314-102MR_
LPS3314-222MR_
LPS3314-332MR_
LPS3314-472MR_
LPS3314-562MR_
1.0
2.2
3.3
4.7
5.6
0.062 215
0.100 140
0.145 115
1.8
1.3
1.1
1.9
1.4
1.2
2.0
1.5
1.3
1.6
1.2
1.0
2.10
1.60
1.35
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5)
or P = non-RoHS tin-lead (63/37).
0.175
0.220
86
74
0.97 0.99 1.0
0.92 0.95 0.98 0.82 1.10
0.90 1.25
Packaging: C=7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
LPS3314-682MR_
LPS3314-822MR_
LPS3314-103MR_
LPS3314-153MR_
LPS3314-183MR_
6.8
8.2
10
15
18
0.240
0.270
0.330
0.440
0.575
72
60
55
45
37
0.87 0.90 0.91 0.82 1.10
0.58 0.75 0.78 0.70 1.00
0.56 0.66 0.70 0.65 0.87
0.46 0.56 0.59 0.62 0.82
0.44 0.51 0.54 0.52 0.68
B=Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
LPS3314-223MR_
LPS3314-333MR_
LPS3314-473MR_
LPS3314-563MR_
LPS3314-683MR_
22
33
47
56
68
0.720
0.920
1.40
1.55
1.80
34
27
22
19
17
0.44 0.48 0.49 0.45 0.60
0.30 0.38 0.40 0.43 0.58
0.28 0.33 0.34 0.35 0.47
0.26 0.30 0.31 0.32 0.42
0.22 0.26 0.29 0.30 0.40
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Ad using an
Agilent/HP 4192A impedance analyzer or equivalent.
Inductance at 1 MHz is the same for parts with SRF
≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
LPS3314-823MR_
82
2.00
2.75
3.45
4.10
4.80
14
13
11
10
0.20 0.24 0.26 0.29 0.39
0.19 0.23 0.24 0.24 0.32
0.19 0.21 0.22 0.22 0.30
0.16 0.19 0.20 0.20 0.27
LPS3314-104MR_ 100
LPS3314-124MR_ 120
LPS3314-154MR_ 150
LPS3314-184MR_ 180
9.0 0.14 0.17 0.18 0.19 0.25
LPS3314-224MR_ 220
LPS3314-334MR_ 330
LPS3314-474MR_ 470
LPS3314-564MR_ 560
LPS3314-684MR_ 680
6.00
9.30
12.0
14.0
18.5
7.0 0.14 0.16 0.17 0.16 0.22
6.0 0.11 0.12 0.13 0.13 0.18
4.5 0.080 0.11 0.11 0.12 0.16
4.5 0.095 0.105 0.11 0.11 0.145
4.0 0.092 0.100 0.105 0.095 0.125
LPS3314-824MR_ 820
24.0
3.7 0.086 0.099 0.100 0.085 0.110
Document 541-1 Revised 08/02/13
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 541-2
Shielded Power Inductors – LPS3314 Series
Typical L vs Frequency
10000
Typical L vs Current
10000
1000 µH
330 µH
1000 µH
1000
1000
330 µH
100 µH
100 µH
33 µH
10 µH
3.3 µH
100
100
10
33 µH
10 µH
10
3.3 µH
1 µH
1 µH
1
1
0.1
0.1
0.01
0.1
1
10
0.01
0.1
1
10
Frequency (MHz)
Current (A)
0.130 0.00ꢀ
3,30 0,10
*
Current Derating
120
110
0.130 0.00ꢀ
3,30 0,10
*
Winding
direction
100
90
80
70
60
50
40
30
XXXX
Dash
number
Internal
code
Recommended
Land Pattern
0.0512 0.00ꢀ
1,30 0,10
*
0.098
2,50
20
Isat
Irms
0.0381
0,968
10
0
-40 -20
0
20
40
60
80
100 120 140
0.10ꢀ 0.03ꢀ7
2,65 0,881
0.0697
1,77
0.1ꢀ6
3,70
Ambient temperature (°C)
0.063
1,60
0.063
1,60
0.10ꢀ
2,65
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
Dimensions are of the case not including
the termination. For maximum overall
dimensions including the termination, add
0.005 in / 0,13 mm.
For optional tin-lead and tin-silver-copper
terminations, dimensions are for the
*
0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth
0.1ꢀ6
3,70
NOTE NEW PART ORIENTATION Parts are rotated 90° in the
packaging tape compared to previous versions of this product.
inches
mm
mounted part. Dimensions before mounting
can be an additional 0.005 inch / 0,13 mm).
Dimensions are in
NEW
OLD
123
123
123
Document 541-2 Revised 08/02/13
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
相关型号：
LPS3314-684MQC
General Purpose Inductor, 680uH, 20%, 1 Element, Ferrite-Core, SMD, 1313, CHIP, 1313, HALOGEN FREE AND ROHS COMPLIANT
COILCRAFT
LPS3314-684MQD
General Purpose Inductor, 680uH, 20%, 1 Element, Ferrite-Core, SMD, 1313, CHIP, 1313, HALOGEN FREE AND ROHS COMPLIANT
COILCRAFT
LPS3314-684MRB
General Purpose Inductor, 680uH, 20%, 1 Element, Ferrite-Core, SMD, 1313, CHIP, 1313, HALOGEN FREE AND ROHS COMPLIANT
COILCRAFT
LPS3314-684MRC
General Purpose Inductor, 680uH, 20%, 1 Element, Ferrite-Core, SMD, 1313, CHIP, 1313, HALOGEN FREE AND ROHS COMPLIANT
COILCRAFT
LPS3314-684MTB
General Purpose Inductor, 680uH, 20%, 1 Element, Ferrite-Core, SMD, 1313, ROHS COMPLIANT
COILCRAFT
LPS3314-684MTC
General Purpose Inductor, 680uH, 20%, 1 Element, Ferrite-Core, SMD, 1313, ROHS COMPLIANT
COILCRAFT
LPS3314-822MRB
General Purpose Inductor, 8.2uH, 20%, 1 Element, Ferrite-Core, SMD, 1313, CHIP, 1313, HALOGEN FREE AND ROHS COMPLIANT
COILCRAFT
©2020 ICPDF网 联系我们和版权申明