LPS4018-223MTB [COILCRAFT]
General Purpose Inductor, 22uH, 20%, 1 Element, Ferrite-Core, SMD, 1515, ROHS COMPLIANT;型号: | LPS4018-223MTB |
厂家: | Coilcraft lnc. |
描述: | General Purpose Inductor, 22uH, 20%, 1 Element, Ferrite-Core, SMD, 1515, ROHS COMPLIANT 电感器 |
文件: | 总2页 (文件大小:206K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Document 435-1
Shielded Power Inductors
–
LPS4018 Series
• Very low DCR; excellent current handling
• 4.0 × 4.0 mm footprint; less than 1.8 mm tall
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 54 – 64 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.9 mm pocket depth
Recommended pick and place nozzle OD: 4 mm; ID: ≤ 2 mm
PCB washing Only pure water or alcohol recommended
Isat (A)5
Irms (A)6
1. Please specify termination and packaging codes:
LPS4018-223MLC
DCR
SRF
Inductance2 max3
typ4 10% 20% 30% 20°C 40°C
Partnumber1
(µH)
(Ohms) (MHz) drop drop drop rise rise
Termination: L= RoHS compliant silver-palladium-
LPS4018-561ML_
LPS4018-102NL_
LPS4018-222ML_
LPS4018-332ML_
LPS4018-472ML_
0.56±20% 0.033 250
1.0±30% 0.042 180
2.2±20% 0.070
3.3±20% 0.080
4.7±20% 0.125
4.8
3.8
2.7
1.9
1.8
5.2
3.9
2.8
2.0
1.9
5.3
4.0
2.9
2.0
1.9
1.9
1.8
1.5
1.4
1.3
2.8
2.5
2.0
1.9
1.8
platinum-glass frit.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
90
75
65
Packaging: C= 7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
LPS4018-682ML_
LPS4018-103ML_
LPS4018-153ML_
LPS4018-183ML_
LPS4018-223ML_
6.8±20% 0.150
50
40
32
27
26
1.2
1.3
1.2
0.91
0.83
0.80
1.3
1.0
1.5
B= Less than full reel. In tape, but not
machine ready.
10±20%
15±20%
18±20%
22±20%
0.200
0.260
0.270
0.360
1.1
1.3
0.90 1.25
0.80 1.12
0.70 1.00
0.65 0.90
0.86
0.78
0.74
0.94
0.85
0.83
To have a leader and trailer added
($25 charge), use code letter C
instead.
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked (3500 parts per full
reel).
LPS4018-333ML_
LPS4018-473ML_
LPS4018-683ML_
LPS4018-104ML_ 100±20%
LPS4018-124ML_ 120±20%
33±20%
47±20%
68±20%
0.420
0.650
0.950
1.40
20
16
13
10
0.58
0.51
0.41
0.34
0.64
0.55
0.45
0.36
0.33
0.68
0.56
0.46
0.37
0.34
0.55 0.80
0.45 0.68
0.40 0.56
0.35 0.50
0.30 0.45
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same
for parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or
equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise
from 25°C ambient.
1.60
9.0 0.31
LPS4018-154ML_ 150±20%
LPS4018-184ML_ 180±20%
LPS4018-224ML_ 220±20%
LPS4018-334ML_ 330±20%
LPS4018-474ML_ 470±20%
2.00
2.50
3.70
5.90
7.80
8.0 0.27
7.5 0.24
6.5 0.21
5.5 0.18
4.5 0.14
0.29
0.26
0.30
0.27
0.28 0.40
0.26 0.36
0.225 0.235 0.20 0.30
0.19
0.16
0.20
0.17
0.17 0.23
0.15 0.20
LPS4018-564ML_ 560±20% 10.0
LPS4018-684ML_ 680±20% 11.5
LPS4018-824ML_ 820±20% 14.0
LPS4018-105ML_ 1000±20% 18.0
LPS4018-155ML_ 1500±20% 25.0
4.0 0.13
3.5 0.12
2.9 0.11
2.8 0.10
0.14
0.13
0.12
0.11
0.15
0.14
0.13
0.11
0.14 0.18
0.12 0.16
0.10 0.14
0.098 0.125
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
2.4 0.095 0.10
0.105 0.080 0.110
LPS4018-185ML_ 1800±20% 31.5
LPS4018-225ML_ 2200±20% 32.5
LPS4018-335ML_ 3300±20% 48.0
2.3 0.090 0.095 0.100 0.070 0.095
2.1 0.088 0.094 0.100 0.070 0.090
1.6 0.082 0.092 0.094 0.055 0.075
Specifications subject to change without notice.
Please check our website for latest information.
Document435-1 Revised08/05/09
© Coilcraft, Inc. 2009
Document 435-2
Shielded SMT Power Inductors
–
LPS4018 Series
Typical L vs Frequency
Typical L vs Current
10000
10000
2200 µH
2200 µH
680 µH
1000
1000
100
10
680 µH
100
22 µH
22 µH
10
4.7 µH
4.7 µH
1 µH
1 µH
1
1
0.1
0.1
0.01
0.1
1
10
0.01
0.1
10
1
Current (A)
Frequency (MHz)
0.1535 ±0.003
3,90 ±0,076
*
Current Derating
120
110
0.1535 ±0.003
3,90 ±0,076
Winding
direction
*
100
90
80
70
60
50
40
30
XXXX
Dash
Internal
code
Recommended
Land Pattern
number
0.118
3,00
0.0669 ±0.004
1,70 ±0,10
0.090
2,30
20
Isat
Irms
45°
typ
10
0
0.028
0,70
-40 -20
0
20
40
60
80
100 120 140
0.123 0.090
3,124 2,30
0.173
4,40
Ambient temperature (°C)
0.060
1,52
0.060
1,50
Coilcraft Designer’s Kit C392 contains samples of 0.80 µH to 33 µH
parts (3 each) from LPS3008, LPS3010 and LPS3015. Kit C401
contains samples of 0.56 µH to 33 µH parts (3 each) from LPS4012
and LPS4018. Kit C402 contains samples of 220 µH to 3300 µH parts
(3 each) from all five series. For details of kit contents and to order,
contact Coilcraft or visit http://order.coilcraft.com.
0.123
3,124
Dimensions are of the case not
*
including the termination. For maximum
overall dimensions including the
termination, add 0.005 in / 0,13 mm.
0.173
4,40
Specifications subject to change without notice.
Please check our website for latest information.
Document435-2 Revised08/05/09
© Coilcraft, Inc. 2009
相关型号:
LPS4018-224ML_
Very low DCR; excellent current handling, 4.0 Ã 4.0 mm footprint; less than 1.8 mm tall
COILCRAFT
LPS4018-224MRB
General Purpose Inductor, 220uH, 20%, 1 Element, Ferrite-Core, SMD, 1515, CHIP, 1515, HALOGEN FREE AND ROHS COMPLIANT
COILCRAFT
LPS4018-225ML_
Very low DCR; excellent current handling, 4.0 Ã 4.0 mm footprint; less than 1.8 mm tall
COILCRAFT
©2020 ICPDF网 联系我们和版权申明