LPZ3015-334MR [COILCRAFT]
Shielded Power Inductors;
| 型号： | LPZ3015-334MR |
| 厂家： | 
Coilcraft lnc. |
| 描述： | Shielded Power Inductors |
| 文件： | 总10页 (文件大小：1865K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Document 1244-1
Shielded Power Inductors High Inductance
• High inductance values (220 – 4700 µH) not available in the
corresponding LPS series of parts
• Rugged construction improves pick and place operation
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver.
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Isat (A)5
Irms (A)6
Inductance2
±±20 (ꢀµ)
DCR max3
(Ohms)
SRF typ4
(Mµz)
Part number1
120 drop ±20 drop 320 drop ±2°C rise 42°C rise
LPZ3008-224MR_
LPZ3008-334MR_
220
330
11.5
18.0
9.0
7.0
0.067
0.059
0.073
0.064
0.076
0.066
0.100
0.090
0.145
0.130
LPZ3010-334MR_
LPZ3015-334MR_
330
330
18.5
23.0
7.0
5.0
0.10
0.10
0.105
0.11
0.115
0.11
0.085
0.070
0.11
0.095
LPZ3314-105MR_
LPZ3314-155MR_
1000
1500
31.0
44.0
3.0
2.7
0.090
0.080
0.099
0.086
0.100
0.090
0.082
0.060
0.100
0.080
LPZ4012-335MR_
3300
65.0
0.95
0.074
0.078
0.080
0.050
0.065
LPZ4018-155MR_
LPZ4018-185MR_
LPZ4018-225MR_
LPZ4018-335MR_
1500
1800
2200
3300
25.0
31.5
32.5
48.0
2.4
2.3
2.1
1.6
0.095
0.090
0.088
0.082
0.10
0.105
0.10
0.10
0.080
0.070
0.070
0.055
0.11
0.095
0.094
0.092
0.095
0.090
0.075
0.094
LPZ4414-155MR_
LPZ4414-185MR_
LPZ4414-225MR_
LPZ4414-335MR_
1500
1800
2200
3300
26.4
35.0
42.5
56.0
2.2
1.9
1.9
1.3
0.096
0.089
0.082
0.072
0.099
0.094
0.089
0.078
0.10
0.085
0.075
0.065
0.055
0.11
0.10
0.080
0.070
0.097
0.092
0.083
LPZ5010-105MR_
1000
28.0
3.0
0.087
0.096
0.10
0.080
0.11
LPZ5015-335MR_
LPZ5015-475MR_
3300
4700
55.0
80.0
1.7
1.4
0.064
0.062
0.072
0.069
0.076
0.072
0.055
0.045
0.075
0.065
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop from its value
without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
1. When ordering, please specify termination and packaging codes:
LPZ3228-334MRC
Termination: R=RoHS compliant matte tin over nickel over silver.
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5) or
P = non-RoHS tin-lead (63/37).
Packaging: C=7″ machine-ready reel. EIA-481 embossed plastic
tape).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D=13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked
Document 1244-1 Revised 01/05/15
Document 1244-2
Shielded Power Inductors – LPZ3008
L vs Current
L vs Frequency
1000
1000
800
700
800
700
600
500
600
500
400
400
300
330 µH
220 µH
330 µH
300
220 µH
200
100
200
100
0.0001
0.001
0.01
0.10
0.01
0.1
1
10
Current (A)
Frequency (Mµz)
Current Derating
120
110
100
90
80
70
60
50
40
30
20
Isat
Irms
10
0
-40 -20
0
20
40
60
80
100
120 140
Ambient temperature (°C)
inches
mm
Dimensions are in
Weight 22 – 25 mg
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth
Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm
Document 1244-2 Revised 01/05/15
Document 1244-3
Shielded Power Inductors – LPZ3010
L vs Current
L vs Frequency
1000
1000
800
700
800
700
600
500
600
500
400
400
300
330 µH
330 µH
300
200
200
100
100
0.0001
0.001
0.01
0.10
0.01
0.1
1
10
Current (A)
Frequency (Mµz)
Typical Current Derating
120
110
100
90
80
70
60
50
40
30
20
Isat
Irms
10
0
-40 -20
0
20
40
60
80
100
120 140
Ambient temperature (°C)
inches
mm
Dimensions are in
Weight 25 – 32 mg
Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.4 mm pocket depth
Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm
Document 1244-3 Revised 01/05/15
Document 1244-4
Shielded Power Inductor – LPZ3015
L vs Current
L vs Frequency
1000
800
700
600
500
400
330 µH
300
200
100
0.001
0.01
0.1
1.0
Current (A)
Current Derating
120
110
100
90
80
70
60
50
40
30
20
Isat
Irms
10
0
-40 -20
0
20
40
60
80
100 120 140
Ambient temperature (°C)
inches
Dimensions are in
mm
Weight 40 – 45 mg
Packaging 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide,
0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth
Recommended pick and place nozzle OD: 3 mm; ID: ≤ 1.5 mm
Document 1244-4 Revised 01/05/15
Document 1244-5
Shielded Power Inductors – LPZ3314
Typical L vs Current
Typical L vs Frequency
Current Derating
120
110
100
90
80
70
60
50
40
30
20
Isat
Irms
10
0
-40 -20
0
20
40
60
80
100 120 140
Ambient temperature (°C)
inches
Dimensions are in
mm
Weight 44.1 – 46.5 mg
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth
Recommended pick and place nozzle OD: 3.3 mm; ID: ≤ 1.65 mm
Document 1244-5 Revised 01/05/15
Document 1244-6
Shielded Power Inductors – LPZ4012
Typical L vs Current
Typical L vs Frequency
0.1535 0.003
3,90 0,0ꢀ7
*
Current Derating
120
110
0.1535 0.003
3,90 0,0ꢀ7
Winding
direction
*
100
90
80
70
60
50
40
30
XXXX
Dash
number
Internal
code
Recommended
Land Pattern
0.105
2,77
0.0433 0.004
1,10 0,10
*
0.059
1,50
20
Isat
Irms
10
0
0.0305
0,ꢀꢀ5
0.110 0.045
2,ꢀ9 1,15
0.153
3,89
-40 -20
0
20
40
60
80
100 120 140
Ambient temperature (°C)
0.129
3,28
0.070
1,52
0.1ꢀ3
4,40
Dimensions are of the case not including
the termination. For maximum overall
dimensions including the termination, add
0.005 in / 0,13 mm.
*
For optional tin-lead and tin-silver-copper
terminations, dimensions are for the
mounted part. Dimensions before mounting
can be an additional 0.005 inch / 0,13 mm).
inches
mm
Dimensions are in
Weight 54 – 64 mg
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.25 mm thick, 8 mm pocket spacing, 1.32 mm pocket depth
Recommended pick and place nozzle OD: 4 mm; ID: ≤ 2 mm
Document 1244-6 Revised 01/05/15
Document 1244-7
Shielded Power Inductors – LPZ4018
Typical L vs Current
Typical L vs Frequency
Current Derating
120
110
100
90
80
70
60
50
40
30
20
Isat
Irms
10
0
-40 -20
0
20
40
60
80
100 120 140
Ambient temperature (°C)
inches
Dimensions are in
mm
Weight 90 – 100 mg
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.9 mm pocket depth
Recommended pick and place nozzle OD: 4 mm; ID: ≤ 2 mm
Document 1244-7 Revised 01/05/15
Document 1244-8
Shielded Power Inductors – LPZ4414
Typical L vs Current
Typical L vs Frequency
0.169 0.00ꢀ
ꢀ,30 0,10
*
Current Derating
120
110
0.169 0.00ꢀ
ꢀ,30 0,10
*
Winding
direction
100
90
80
70
60
50
40
30
XXXX
Dash
number
Internal
code
0.0551
1,ꢀ0
max
*
Recommended
Land Pattern
0.059
1,50
0.128
3,25
20
Isat
Irms
10
0
-40 -20
0
20
40
60
80
100 120 140
0.030
typ
0,75
0.185 0.118
ꢀ,70
3,00
0.12ꢀ
3,15
0.055
1,ꢀ0
Ambient temperature (°C)
0.030
0,75
0.059
1,50
typ
0.118
3,00
Dimensions are of the case not including
the termination. For maximum overall
dimensions including the termination, add
0.005 in / 0,13 mm.
*
0.185
ꢀ,70
For optional tin-lead and tin-silver-copper
terminations, dimensions are for the
mounted part. Dimensions before mounting
can be an additional 0.005 inch / 0,13 mm).
inches
mm
Dimensions are in
Weight 82.3 – 89.8 mg
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth
Recommended pick and place nozzle: OD: 4.5 mm; ID: ≤2 mm
Document 1244-8 Revised 01/05/15
Document 1244-9
Shielded Power Inductor – LPZ5010
Typical L vs Current
Typical L vs Frequency
Current Derating
120
110
100
90
80
70
60
50
40
30
20
Isat
Irms
10
0
-40 -20
0
20
40
60
80
100 120 140
Ambient temperature (°C)
inches
Dimensions are in
mm
Weight 70 – 75 mg
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.02 mm pocket depth
Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm
Document 1244-9 Revised 01/05/15
Document 1244-10
Shielded Power Inductors – LPZ5015
Typical L vs Current
Typical L vs Frequency
Typical Current Derating
120
110
100
90
80
70
60
50
40
30
20
Isat
Irms
10
0
-40 -20
0
20
40
60
80
100 120 140
Ambient temperature (°C)
inches
Dimensions are in
mm
Weight 102 – 107 mg
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth
Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm
Document 1244-10 Revised 01/05/15
相关型号：
LPZ3314-105MRB
General Purpose Inductor, 1000uH, 20%, 1 Element, Ferrite-Core, SMD, 1414, CHIP, 1313
COILCRAFT
©2020 ICPDF网 联系我们和版权申明