PFL1610-222MSU [COILCRAFT]
General Purpose Inductor, 2.2uH, 20%, 0704,;型号: | PFL1610-222MSU |
厂家: | Coilcraft lnc. |
描述: | General Purpose Inductor, 2.2uH, 20%, 0704, |
文件: | 总2页 (文件大小:100K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Document 753-1
Shielded Power Inductors
–
PFL1610
RoHS
FREE
OGEN
HAL
• Low cost, low profile, 0603 size power inductor
• Current handling of much larger inductors; up to 2350 mA.
Designer’s Kit C433 contains 20 of each PFL1610 and PFL2010 value
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver-
platinum-glass frit. Other terminations available at additional cost.
Core material Composite
Core and winding loss See www.coilcraft.com/coreloss
Weight 5.4 – 5.7 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 2000 per 7″ reel Paper tape: 8 mm wide, 1.68 mm thick,
2 mm pocket spacing
PCB washing Only pure water or alcohol recommended
DCR(mOhms)3
Isat (mA)5
±20 drop 320 drop
Irms(mA)6
±2°C rise 42°C rise
Inductance2
±±20 (µH)
SRF typ4
(MHz)
Partnumber1
typ
max
120 drop
PFL1610-331ME_
PFL1610-471ME_
PFL1610-561ME_
PFL1610-681ME_
PFL1610-102ME_
0.33
0.47
0.56
0.68
1.0
85
183
143
203
331
98
205
160
223
365
644
540
475
423
351
1140
1000
800
800
650
1860
1700
1400
1500
1000
2350
1820
1600
1630
1260
1100
770
700
720
570
1500
1000
900
970
750
PFL1610-222ME_
PFL1610-472ME_
2.2
4.7
1120
1560
1230
1720
105
85
330
290
555
480
660
560
280
230
380
310
1. When ordering, please specify packaging codes:
PFL1612-47±MEW
Packaging: W= 7″ machine-ready reel. EIA-481 punched paper tape
(2000 parts per full reel).
U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead.
2. Inductance tested at 7.9 MHz, 0.1 Vrms using a Coilcraft SMD-F test fixture with an Agilent/HP 4286 impedance analyzer and Coilcraft-provided
correlation pieces.
3. DCR measured using a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
5. DC current at which the inductance drops the specified amount from its value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Specifications subject to change without notice.
Please check our website for latest information.
Document 753-1 Revised 05/13/10
© Coilcraft, Inc. 2010
Document 753-2
PFL1610 Series
RoHS
FREE
OGEN
HAL
L vs Current
L vs Frequency
10
7
10
7
4.7 µH
2.2 µH
5
4
5
4
4.7 µH
2.2 µH
3
3
2
2
1.0 µH
1
1
1.0 µH
0.68 µH
0.68 µH
0.56 µH
0.7
0.7
0.5
0.4
0.5
0.4
0.56 µH
0.47 µH
0.47 µH
0.33 µH
0.3
0.3
0.33 µH
0.2
0.2
0.1
0.1
1
10
100
1000
0.01
0.1
1
10
Frequency (MHz)
Current (A)
0.071
1,80
max
Irms Derating
0.015
0,38
120
110
0.0394
1,00
max
100
90
80
70
60
50
40
30
20
Terminal wraparound:
approx 0.007/0,18 both ends
0.012
0,305
0.012
0,305
0.035
0,89
0.042
0.030
0,76
max
1,07
0.050
1,27
10
0
-40 -20
0
20
40
60
80
100
120 140
0.040
1,02
Ambient temperature (°C)
0.025
0,64
inches
mm
Dimensions are in
Recommended
Land Pattern
Specifications subject to change without notice.
Please check our website for latest information.
Document 753-2 Revised 05/13/10
© Coilcraft, Inc. 2010
相关型号:
PFL1610-471MEU
General Purpose Inductor, 0.47uH, 20%, 1 Element, Composite-Core, SMD, 1610-M, CHIP, 1610-M, HALOGEN FREE AND ROHS COMPLIANT
COILCRAFT
PFL1610-471MEW
General Purpose Inductor, 0.47uH, 20%, 1 Element, Composite-Core, SMD, 1610-M, CHIP, 1610-M, HALOGEN FREE AND ROHS COMPLIANT
COILCRAFT
©2020 ICPDF网 联系我们和版权申明