PFL2010-102MED [COILCRAFT]
Shielded Power Inductors;型号: | PFL2010-102MED |
厂家: | Coilcraft lnc. |
描述: | Shielded Power Inductors |
文件: | 总2页 (文件大小:389K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Document 775-1
Shielded Power Inductors
–
PFL2010
• Only 1 mm high; requires a mere 3.2 mm2 of board space
• Provides the current handling of much larger inductors; up
to 1800 mA
Core material Composite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silver-plati-
num-glass frit. Other terminations available at additional cost.
Weight 9.5 – 9.8 mg
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 2000/7″ reel; 7500/13″ reel. Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.07 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Isat (mA)5
±20 drop 320 drop
Irms (mA)6
±2°C rise 42°C rise
Inductance2
±±20 (ꢀµ)
SRF typ4
(Mµz)
Part number1
typ
max
120 drop
PFL2010-471ME_
PFL2010-681ME_
PFL2010-102ME_
PFL2010-222ME_
PFL2010-472ME_
0.47
0.68
1.0
2.2
4.7
60
87
189
423
618
69
95
208
465
680
630
560
347
129
66
1200
950
850
510
330
1600
1300
1100
680
1800
1500
1200
790
1500
1400
640
480
420
1900
1600
860
660
560
490
570
1. When ordering, please specify termination and packaging codes:
PFL±212-47±MEC
Termination: E = RoHS compliant matte tin over nickel over silver.
Special order, added cost:
Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel).
2. Inductance tested at 7.9 MHz, 0.1 Vrms using a Coilcraft SMD-F test fixture with an Agilent/HP 4286 impedance analyzer and Coilcraft-provided correla-
tion pieces.
3. DCR measured using a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture.
5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.This information is for reference only and does not represent absolute maximum
ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 775-1 Revised 09/13/15
Document 775-2
PFL2010 Series
Typical L vs Frequency
Typical L vs Current
10
7
10
7
4.7 µH
5
4
5
4
4.7 µH
3
3
2.2 µH
2
2
2.2 µH
1.0 µH
0.68 µH
0.47 µH
1
1
0.7
0.5
1.0 µH
0.68 µH
0.47 µH
0.7
0.5
0.4
0.4
0.3
0.3
0.2
0.2
0.1
0.1
0.01
0.1
1
10
1
10
100
1000
Current (A)
Frequency (MHz)
0.087
2,20
max
0.015
0,38
0.039
1,00
max
Terminal wraparound:
approx 0.01/0,254 both ends
0.012
0,305
0.056
1,42
0.012
0,305
0.057
1,45
0.050
1,27
max
0.070
1,78
0.070
1.78
0.040
1,02
Recommended
Land Pattern
inches
mm
Dimensions are in
Document 775-2 Revised 09/13815
相关型号:
PFL2010-222MEB
Kit Contents for C433 PFL1609 and PFL2010 Power Inductors 11 values, 20 of each
COILCRAFT
PFL2010-471MEB
Kit Contents for C433 PFL1609 and PFL2010 Power Inductors 11 values, 20 of each
COILCRAFT
©2020 ICPDF网 联系我们和版权申明