ST450RAA332FLZ [COILCRAFT]
General Purpose Inductor;![ST450RAA332FLZ](http://pdffile.icpdf.com/pdf2/p00276/img/icpdf/ST450RAA332F_1650885_icpdf.jpg)
型号: | ST450RAA332FLZ |
厂家: | ![]() |
描述: | General Purpose Inductor 电感器 |
文件: | 总2页 (文件大小:130K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
1812CHIPINDUCTORS
Chip Inductors for Critical ApplicationsST450RAA
■ Higher SRF values than 1812 size parts with ferrite cores
■ 2% and 1% tolerances for all values
■ 9 inductance values from 1.0 to 4.7 µH
Inductance2
(µH)
Percent
tolerance
SRF min4
(MHz)
DCR max5
(Ohms)
Imax
(mA)
Part number1
Q min3
ST450RAA102JLZ
ST450RAA122JLZ
ST450RAA152_LZ
ST450RAA182JLZ
ST450RAA222JLZ
1.0 @ 7.9 MHz
1.2 @ 7.9 MHz
1.5 @ 7.9 MHz
1.8 @ 7.9 MHz
2.2 @ 7.9 MHz
5,2,1
5,2,1
5,2,1
5,2,1
5,2,1
59 @ 50 MHz
54 @ 50 MHz
57 @ 50 MHz
57 @ 50 MHz
52 @ 50 MHz
260
230
210
190
170
1.1
1.2
1.6
2.0
2.2
530
480
430
380
340
ST450RAA272JLZ
ST450RAA332JLZ
ST450RAA392_LZ
ST450RAA472JLZ
2.7 @ 7.9 MHz
3.3 @ 7.9 MHz
3.9 @ 7.9 MHz
4.7 @ 7.9 MHz
5,2,1
5,2,1
5,2,1
5,2,1
53 @ 50 MHz
53 @ 50 MHz
53 @ 50 MHz
32 @ 10 MHz
160
145
130
115
3.2
3.8
5.0
5.4
300
270
240
230
1.When ordering, specify tolerance, termination and testing codes:
Core material Ceramic
Terminations Silver-palladium-platinum-glass frit. Other terminations
ST450RAA333JLZ
Tolerance: F = 1% G = 2% J = 5%
Termination: L = RoHS compliant silver-palladium-platinum glass frit.
Special order:
available at additional cost.
Weight: 109 – 128 mg
Ambient temperature –40°C to +125°C with Imax current, +125°C
to +140°C with derated current
S = Tin-lead (63/37) over silver-platinum-glass frit.
T = Tin-silver-copper (95.5/4/0.5) over silver-platinum-
Storage temperature Component: –55°C to +140°C.
glass frit.
Tape and reel packaging: –55°C to +80°C
P = Tin-lead (63/37) over tin over nickel over silver-
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
platinum-glass frit.
Q = Tin-silver-copper (95.5/4/0.5) over tin over nickel
Temperature Coefficient of Inductance (TCL) +25 to +155 ppm/°C
over silver-platinum-glass frit.
Testing:
Z = COTS
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
H = Screening per Coilcraft CP-SA-10001
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286 impedance analyzer or equivalent with Coilcraft-provided correla-
tion pieces.
Packaging 600 per 7″ reel Plastic tape: 12 mm wide, 0.3 mm
thick, 8 mm pocket spacing, 3.7 mm pocket depth
3. Q measured at the same frequency as inductance using an Agilent/
HP 4291A with an Agilent/HP 16197 test fixture or equivalents.
4. SRF measured using an Agilent/HP 8753ES network analyzer or equiva-
lent and a Coilcraft SMD-D test fixture.
5. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a
Coilcraft CCF859 test fixture.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document ST105-1 Revised 11/06/12
This product may not be used in medical or high
Fax 847-639-1508
Email cps@coilcraft.com Specifications subject to change without notice.
www.coilcraft-cps.com Please check our web site for latest information.
risk applications without prior Coilcraft approval.
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
© Coilcraft, Inc. 2012
1812CHIPINDUCTORS
ST450RAA Series (1812)
Typical Q vs Frequency
Typical L vs Frequency
100
6.0
5.5
90
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
4.7 µH
80
70
1.0 µH
1.5 µH
2.2 µH
3.3 µH
60
50
40
30
20
3.3 µH
4.7 µH
2.2 µH
1.5 µH
1.0 µH
10
0
0.5
0
1
10
100
1000
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
B
Current Derating
H
overall
C
F
G
F
I
120
110
A
J
100
90
80
70
60
50
40
30
20
I
E
D
terminal
Suggested
Terminal wraparound:
approx 0.007/0,18 both ends
Land Pattern
A max B max C max D ref
0.195 0.150 0.135 0.070 0.100 0.025 0.128 0.120 0.045 0.118
4,95 3,81 3,43 1,78 2,54 0,64 3,25 3,05 1,14 3,00
E
F
G
H
I
J
10
0
Note: Dimensions are before optional solder application. For maximum
overall dimensions including solder, add 0.0025 in / 0,064 mm to B
and 0.006 in / 0,15 mm to A and C.
-40 -20
0
20
40
60
80
100 120 140 160
Ambient temperature (°C)
Document ST105-2 Revised 11/06/12
This product may not be used in medical or high
Fax 847-639-1508
Email cps@coilcraft.com Specifications subject to change without notice.
www.coilcraft-cps.com Please check our web site for latest information.
risk applications without prior Coilcraft approval.
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
© Coilcraft, Inc. 2012
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00267/img/page/ST450RAA562J_1603669_files/ST450RAA562J_1603669_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00267/img/page/ST450RAA562J_1603669_files/ST450RAA562J_1603669_2.jpg)
ST450RAA562JQH
General Purpose Inductor, 5.6uH, 5%, 1 Element, Ceramic-Core, SMD, 2015, CHIP, 2015, ROHS COMPLIANT
COILCRAFT
©2020 ICPDF网 联系我们和版权申明