XFL7015_18 [COILCRAFT]
Shielded Power Inductors;
| 型号： | XFL7015_18 |
| 厂家： | 
Coilcraft lnc. |
| 描述： | Shielded Power Inductors |
| 文件： | 总2页 (文件大小：209K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 1039-1
Shielded Power Inductors
–
XFL7015
• Very low profile, only 1.5 mm tall
• High current and very low DCR
• AEC-Q200 Grade 1 qualified (–40°C to +125°C ambient)
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Core material Composite
Weight 0.37 – 0.38 g
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 750/7″ reel; 3000/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 1.65 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3
Isat (A)5
Irms (A)6
±2°C rise 42°C rise
Inductance2
±±20 (ꢀµ)
SRF typ4
(Mµz)
Part number1
typ
max
120 drop ±20 drop 320 drop
XFL7015-251ME_
XFL7015-471ME_
XFL7015-681ME_
XFL7015-102ME_
XFL7015-152ME_
0.25
0.47
0.68
1.0
3.90
5.80
7.70
13.6
18.3
4.30
6.38
8.47
16.0
22.6
80
56
49
39
33
9.0
6.5
4.7
4.0
3.0
12.5
10.0
8.5
6.3
5.5
14.5
11.5
10.0
7.4
16.0
12.5
11.5
7.5
20.0
17.0
15.0
10.5
8.0
1.5
6.6
6.0
1. When ordering, please specify termination and packaging codes:
XFL7215-15±MEC
Termination: E = RoHS compliant tin-silver over copper.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel).
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly depen-
dent on many factors including
pcb land pattern, trace size, and
proximity to other components.
Therefore temperature rise
should be verified in application
conditions.
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(3000 parts per full reel).
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes the specified inductance drop from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 1039-1 Revised 04/19/18
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 1039-2
Shielded Power Inductors – XFL7015
L vs Current
L vs Frequency
10
0.4
0.3
0.25 µH
0.2
0.1
0
1.5 µH
1.0 µH
0.68 µH
0
0
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
1
Current (A)
0.47 µH
0.6
0.5
0.47 µH
0.25 µH
0.4
0.3
0.2
0.1
0.1
0
0.1
1
10
100
Frequency (MHz)
1
2
3
4
5
6
7
8
9
10
11 12
Current (A)
1.0
0.8
0.295 0.020
7,5 0,5
0.6
0.4
0.68 µH
0.2
0
0.295 0.020
7,5 0,5
1
2
3
4
5
6
7
8
9
10 11
Current (A)
1.6
1.2
*For optional tin-lead and tin-silver-
Dash
number
Indicates start lead
and orientation of
terminations
copper terminations, dimensions
are for the mounted part.
Dimensions before mounting can be
an additional 0.005 inch / 0.13 mm.
1.0 µH
0.8
0.4
0
Recommended
Land Pattern
0
1
2
3
4
5
6
7
8
9
10
0.059
1,5
max
*
0.186
4,72
C
Current (A)
(see table)
2.4
1.8
A
B
1.5 µH
(see table)
(see table)
1.2
0.6
0
0.070
1,78
0.123 0.010
3,12 0.25
0
1
2
3
4
5
6
7
8
9
Current (A)
A
C
0.008 in
0,20 mm
(in / mm)
0.002 in
0,05 mm
(in / mm)
inches
mm
Dimensions are in
Dash
number
B
(in / mm)
-251
-471
-681
-102
-152
0.241 / 6.12 0.245 / 6.22 0.063 / 1.60
0.241 / 6.12 0.245 / 6.22 0.063 / 1.60
0.241 / 6.12 0.245 / 6.22 0.063 / 1.60
0.239 / 6.08 0.242 / 6.16 0.055 / 1.40
0.239 / 6.08 0.242 / 6.16 0.055 / 1.40
Document 1039-2 Revised 04/19/18
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
相关型号：
©2020 ICPDF网 联系我们和版权申明