C13-040.0M [CONNOR-WINFIELD]
Clipped Sine Output Oscillator, 10MHz Min, 40MHz Max, 40MHz Nom;
| 型号： | C13-040.0M |
| 厂家： | 
CONNOR-WINFIELD CORPORATION |
| 描述： | Clipped Sine Output Oscillator, 10MHz Min, 40MHz Max, 40MHz Nom 振荡器 |
| 文件： | 总4页 (文件大小：354K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Ultra-Miniature
Precision
TCXO / VCTCXO
Description
Features
The Connor-Winfield 2.5x3.2mm
Temperature Compensated Crystal
Oscillators and Voltage Controlled
Temperature Compensated Crystal
Oscillators are designed for use in GPS
applications requiring tight frequency
stability over the -30 to 85°C or
Model: Cxx - Series
2111 Comprehensive Drive
2.5 Vdc, 2.8 Vdc or 3.3 Vdc Operation
Clipped Sinewave Output Logic
Ultra-Miniature 2.5x3.2mm SMT Package
Frequency Stabilities Available:
0.50ppm, 1.00ppm, 1.50ppm or
2.00ppm
Aurora, Illinois 60505
Phone: 630-851-4722
20.0 3A
C31
Fax: 630-851-5040
Temperature Ranges Available:
-30 to 85°C or -40 to 85°C
Low Power <2mA
www.conwin.com
-40 to 85°C temperature range.
Through the use of Analog Temperature
Compensation, this device is capable of
holding sub 1-ppm stabilities over the wide
temperature range.
US Headquarters:
630-851-4722
Low Jitter <1ps RMS
Tape and Reel Packaging
European Headquarters:
+353-61-472221
RoHS Compliant / Lead Free
Recommended for new designs
Pad Connections
Applications
GPS Receivers
1. VCTCXO - Control Voltage (Vc)
TCXO - N/C
2.
3.
4.
Ground
Output
Supply Voltage (Vcc)
Package Layout
Suggested Pad Layout
0.0325
(0.83mm)
0.043 Max.
(1.10mm Max.)
0.098
(2.50mm)
0.039
(1.00mm)
0.037
0.037
(0.94mm)
(0.94mm)
0.035
(0.89mm)
3
2
0.121
(3.08mm)
0.025
(0.64mm)
0.128
(3.20mm)
0.071
(1.80mm)
Top
View
0.0625
(1.59mm)
0.035
(0.89mm)
4
1
Pin 1
0.027
(0.69mm)
0.094
(2.38mm)
Keep Out Area*
* Do not route any traces in the keep out area.
It is recommended the next layer under the
keep out area is to be ground plane.
Dimensional Tolerance:
+/-005 (+/-0.127mm)
Ordering Information
C
1
-020.0M
3
Features
Output Frequency
Oscillator Type
Precision
Frequency Stability
1 = TCXO, 2.5 Vdc, -30 to 85°C
2 = VCTCXO, 2.5 Vdc, -30 to 85°C
3 = TCXO, 3.3Vdc, -30 to 85°C
4 = VCTCXO, 3.3 Vdc, -30 to 85°C
9 = TCXO, 2.5 Vdc, -40 to 85°C
0 = VCTCXO, 2.5 Vdc, -40 to 85°C
7 = TCXO, 3.3Vdc, -40 to 85°C
8 = VCTCXO, 3.3 Vdc, -40 to 85°C
A = TCXO, 2.8 Vdc, -30 to 85°C
B = VCTCXO, 2.8 Vdc, -30 to 85°C
C = TCXO, 2.8 Vdc, -40 to 85°C
D = VCTCXO, 2.8 Vdc, -40 to 85°C
Frequency
Format
-xxx.xM Min.*
-xxx.xxxxxxM Max*
1 = ±0.50 ppm
2 = ±1.00 ppm
3 = ±1.50 ppm
4 = ±2.00 ppm
TCXO
VCTCXO
2.5x3.2mm
Package
*Amount of
numbers after the
decimal point.
M = MHz
Bulletin
TX211
1 of 4
Example Part Numbers:
Page
C31-020.0M =2.5x3.2mm package, TCXO, 3.3 Vdc -30 to 85°C, ±0.50 ppm, Clipped Sinewave Output with an Output Frequency of 20.0MHz
C21-026.0M =2.5x3.2mm package, VCTCXO, 2.5 Vdc -30 to 85°C, ±0.50 ppm, Clipped Sinewave Output with an Output Frequency of 26.0MHz
Revision
08
Date
28 Jan 2013
Please consult the factory for available frequencies.
Specifications subject to change without notice. All dimensions in inches. © Copyright 2010 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Model Specifications
Model Number
C11
CA1
C31
C21
CB1
C41 Notes
TCXO / VCTCXO
TCXO
TCXO
TCXO
VCTCXO VCTCXO VCTCXO
2.5 Vdc 2.8 Vdc 3.3 Vdc
±±.5± ppꢀ
-3± to 85 °C
1
Supply Voltage (Vcc)
Frequency Stability
Operating Teꢀperature Range
Model Number
2.5 Vdc 2.8 Vdc 3.3 Vdc
C12
TCXO
CA2
TCXO
C32
C22
CB2
C42 Notes
TCXO / VCTCXO
TCXO
VCTCXO VCTCXO VCTCXO
2.5 Vdc 2.8 Vdc 3.3 Vdc
±1.±± ppꢀ
-3± to 85 °C
1
Supply Voltage (Vcc)
Frequency Stability
Operating Teꢀperature Range
Model Number
2.5 Vdc 2.8 Vdc 3.3 Vdc
C13
TCXO
CA3
TCXO
C33
C23
CB3
C43 Notes
TCXO / VCTCXO
TCXO
VCTCXO VCTCXO VCTCXO
2.5 Vdc 2.8 Vdc 3.3 Vdc
±1.5± ppꢀ
-3± to 85 °C
1
Supply Voltage (Vcc)
Frequency Stability
Operating Teꢀperature Range
Model Number
2.5 Vdc 2.8 Vdc 3.3 Vdc
C14
TCXO
CA4
TCXO
C34
C24
CB4
C44 Notes
TCXO / VCTCXO
TCXO
VCTCXO VCTCXO VCTCXO
2.5 Vdc 2.8 Vdc 3.3 Vdc
±2.±± ppꢀ
-3± to 85 °C
1
Supply Voltage (Vcc)
Frequency Stability
Operating Teꢀperature Range
2.5 Vdc 2.8 Vdc 3.3 Vdc
Model Number
C91
CC1
C71
C01
CD1
C81 Notes
TCXO / VCTCXO
TCXO
TCXO
TCXO
VCTCXO VCTCXO VCTCXO
2.5 Vdc 2.8 Vdc 3.3 Vdc
±±.5± ppꢀ
-4± to 85 °C
1
Supply Voltage (Vcc)
Frequency Stability
Operating Teꢀperature Range
Model Number
2.5 Vdc 2.8 Vdc 3.3 Vdc
C92
TCXO
CC2
TCXO
C72
C02
CD2
C82 Notes
TCXO / VCTCXO
TCXO
VCTCXO VCTCXO VCTCXO
2.5 Vdc 2.8 Vdc 3.3 Vdc
±1.±± ppꢀ
-4± to 85 °C
1
Supply Voltage (Vcc)
Frequency Stability
Operating Teꢀperature Range
Model Number
2.5 Vdc 2.8 Vdc 3.3 Vdc
C93
TCXO
CC3
TCXO
C73
C03
CD3
C83 Notes
TCXO / VCTCXO
TCXO
VCTCXO VCTCXO VCTCXO
2.5 Vdc 2.8 Vdc 3.3 Vdc
±1.5± ppꢀ
-4± to 85 °C
1
Supply Voltage (Vcc)
Frequency Stability
Operating Teꢀperature Range
Model Number
2.5 Vdc 2.8 Vdc 3.3 Vdc
C94
TCXO
CC4
TCXO
C74
C04
CD4
C84 Notes
TCXO / VCTCXO
TCXO
VCTCXO VCTCXO VCTCXO
2.5 Vdc 2.8 Vdc 3.3 Vdc
±2.±± ppꢀ
1
Supply Voltage (Vcc)
Frequency Stability
Operating Teꢀperature Range
2.5 Vdc 2.8 Vdc 3.3 Vdc
-4± to 85 °C
Absolute Maximum Ratings
Parameter
Minimum
-4±
Nominal Maximum Units
Notes
Storage Teꢀperature
Supply Voltage (Vcc)
Input Voltage (Vc)
-
-
-
85
6.±
Vcc+±.5
°C
-±.5
-±.5
Vdc
Vdc
Bulletin
Page
TX211
2 of 4
Revision
Date
08
28 Jan 2013
Specifications subject to change without notice. All dimensions in inches. © Copyright 2010 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Operating Specifications
Parameter
Minimum
1±
Nominal Maximum Units
Notes
Center Frequency
-
-
-
-
-
-
-
4±
1.±
±.±25
±.±25
1.±
±.4
1.±
MHz
ppꢀ
ppꢀ
ppꢀ
ppꢀ
ppꢀ
ppꢀ
Frequency Calibration @ 25 °C
Supply Voltage Variation (Vcc±5%)
Load Coefficient (±5%)
Aging per year
Static Teꢀperature Hysteresis
Frequency shift after reflow soldering
Supply Voltage (Vcc)
2.5 Vdc Models
2.8 Vdc Models
3.3 Vdc Models
Supply Current (Icc)
Period Jitter
-1.±
2
-±.±25
-±.±25
-1.±
-±.4
-1.±
3
2.375
2.66±
3.135
-
-
-
2.5±±
2.8±±
3.3±±
-
3
±.3
2.625
2.94±
3.465
2
Vdc
Vdc
Vdc
ꢀA
ps rꢀs
ps rꢀs
5
Integrated Phase Jitter (BW=12 Khz to 2± MHz)
Typical SSB Phase Noise for 26 MHz
@ 1±Hz offset
1.±
-
-
-
-
-
-
-8±
-11±
-13±
-145
-15±
-
-
-
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ꢀs
@ 1±±Hz offset
@ 1KHz offset
-
@ 1±KHz offset
-
-
@ 1±±KHz offset
Start-up Tiꢀe
1±
Control Voltage Characteristics
Parameter
Minimum
Nominal Maximum Units
Notes
Control Voltage (Vc)
2.5 Vdc Models
2.8 Vdc Models
3.3 Vdc Models
Frequency Pullibility @ 25°C
Control Slope
±.2
±.4
±.5
1.2
1.4
1.5
-
2.2
2.4
2.5
-
V
V
V
4
4
4
±1±
ppꢀ
Positive Slope
Monotonic Linearity
Input Iꢀpedance
Modulation Bandwidth (3dB)
-
-
-
-
±5
-
-
%
Ohꢀ
KHz
5±K
1±
Clipped Sinewave Output Characteristics
Parameter
Load
Output Voltage
Minimum
Nominal Maximum
Units
Notes
5, 6
7
1±pF // 1± KOhꢀ
1.±
-
-
V peak to peak
Package Characteristics
Herꢀetically sealed ceraꢀic package and ꢀetal cover
Package
Environmental Characteristics
Vibration:
Shock:
Soldering Process;
Vibration per Mil Std 883E Method 2±±7.3 Test Condition A
Mechanical Shock per Mil Std 883E Method 2±±2.4 Test Condition B.
RoHS coꢀpliant lead free. See soldering profile on page 4.
Notes:
1. Frequency stability vs. change in temperature [±(Fmax-Fmin)/(2*Fo)], Vc = nominal control voltage for VCTCXO models.
2. Initial calibration @ 25°C, Vc = nominal control voltage for VCTCXO models. Specification at the time of shipment after 48 hours of operation.
3. Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after @ 25°C.
4. For best application performance, careful selection of an external power source is critical. Select an external regulator that meets or exceeds to following
specifications regarding voltage regulation tolerance, initial accuracy, temperature coefficient, voltage noise, and low voltage noise density. Factory Test Conditions:
Initial Accuracy 2mv, Noise (0.1Hz to 10 KHz) 15uV p-p, Voltage Noise Density = 50nV/sqrt Hz, Temperature Coefficient < 5ppm/°C.
5. Attention: To achieve the frequency stability specified it is required that the circuit connected to this TCXO output must have the equivalent input capacitance that is
specified by the nominal load capacitance. Deviations from the nominal load capacitance will have a graduated effect on the stability of approximately 20ppb per pF
load difference.
6. Load capacitor, load resistor, coupling capacitor and by pass capacitors are required components to insure proper operation of this TCXO / VCTCXO.
7. Output is DC coupled.
Bulletin
TX211
3 of 4
08
Page
Revision
Date
28 Jan 2013
Specifications subject to change without notice. All dimensions in inches. © Copyright 2010 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Output Waveform
Test Circuit
AC Coupling
Capacitor *
Vcc
Supply
Voltage
Output
10 pF *
4
3
10Kohm *
2
10 nF
Bypass *
1
0.1 uF
Bypass *
Pad 1
TCXO = N/C
VCTCXO = Vc
0
200 mV/Div
* Required components to insure proper operation.
Typical Phase Noise Plot
Solder Profile
Typical Phase Noise C31-±26.±M
Temperature
260°C
260°C
220°C
180°C
150°C
120°C
0
10 s
Up to 120 s
60 to 90 s
Typical
Typical
Meets IPC/JEDEC J-STD-020C
Tape and Reel Information
Marking Information
0.354
Output
(9mm)
Direction of Feed (Customer)
Date Code
YM
0.051
(1.3mm)
Frequency
MHz
20.0 3A
C31
0.039
0.157
0.051
(1.3mm)
(1.0mm) DIA
(4.0mm)
0.079
(2.0mm)
Model
0.069
0.079
(2mm)
Pad 1
(1.75mm)
Number
7.09
(180mm)
Indicator
0.138
0.315
(3.5mm)
2.36
(60mm)
(8.0mm)
0.157
0.039
(4.0mm)
(1.0mm) DIA
Bulletin
Page
TX211
4 of 4
0.512
(13mm)
Revision
Date
08
28 Jan 2013
Specifications subject to change without notice. All dimensions in inches. © Copyright 2010 The Connor-Winfield Corporation
相关型号：
C1300
PXO 9X14 J Leaded Surface Mount Package Reflow Process Compatible ACMOS, TTL, LVPECL and LVDS
VECTRON
C13003A
Power Bipolar Transistor, 1.5A I(C), 400V V(BR)CEO, 1-Element, NPN, Silicon, TO-126, Plastic/Epoxy, 3 Pin, PLASTIC PACKAGE-3
RECTRON
C13003B
Power Bipolar Transistor, 1.5A I(C), 400V V(BR)CEO, 1-Element, NPN, Silicon, TO-126, Plastic/Epoxy, 3 Pin, PLASTIC PACKAGE-3
RECTRON
C13003E
Power Bipolar Transistor, 1.5A I(C), 400V V(BR)CEO, 1-Element, NPN, Silicon, TO-126, Plastic/Epoxy, 3 Pin, PLASTIC PACKAGE-3
RECTRON
C13003F
Power Bipolar Transistor, 1.5A I(C), 400V V(BR)CEO, 1-Element, NPN, Silicon, TO-126, Plastic/Epoxy, 3 Pin, PLASTIC PACKAGE-3
RECTRON
©2020 ICPDF网 联系我们和版权申明