DOC050V-040.0M [CONNOR-WINFIELD]

CMOS Output Clock Oscillator;
DOC050V-040.0M
型号: DOC050V-040.0M
厂家: CONNOR-WINFIELD CORPORATION    CONNOR-WINFIELD CORPORATION
描述:

CMOS Output Clock Oscillator

机械 振荡器
文件: 总4页 (文件大小:649K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Available at Digi-Key**  
www.digikey.com  
Surface Mount  
Oven Stabilized Oscillator  
DOC Series  
OCXO / VCOCXO  
Description:  
1028  
DOC050F  
MHz  
10.0  
Connor-Winfield’sꢀhighꢀstabilityꢀDOCꢀ  
2111 Comprehensive Drive  
seriesꢀareꢀexceptionallyꢀpreciseꢀfrequencyꢀ  
standards,ꢀexcellentꢀforꢀuseꢀinꢀcellularꢀbaseꢀ  
stations,ꢀtestꢀequipment,ꢀSynchronousꢀ  
EthernetꢀandꢀVSATꢀapplications.ꢀ  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630-851-5040  
Features:  
www.conwin.com  
OCXOꢀ-ꢀFixedꢀFrequencyꢀ  
TheseꢀtrueꢀsurfaceꢀmountꢀOCXOꢀ/ꢀ  
VCOCXOꢀ-ꢀVoltageꢀControlledꢀOption  
3.3ꢀVdcꢀOperation  
SMTꢀPackage  
FrequencyꢀStabilitiesꢀAvailable:  
ꢀꢀꢀꢀꢀꢀ±±2ꢀppb,ꢀ±2ꢀppbꢀorꢀ±22ꢀppb  
TemperatureꢀRangesꢀAvailable:ꢀ  
ꢀꢀꢀꢀꢀ2ꢀtoꢀ72°C,ꢀ-±2ꢀtoꢀ7ꢂ°,ꢀ-42ꢀtoꢀ8ꢂ°Cꢀ  
ꢀꢀꢀꢀꢀorꢀ-42ꢀtoꢀ72°C  
LowꢀPhaseꢀNoise  
LVCMOSꢀOutputꢀ  
OptionalꢀElectronicꢀFrequencyꢀTuning  
RoHSꢀCompliantꢀ/ꢀLeadꢀFree  
VCOCXOꢀoscillatorsꢀprovideꢀfrequencyꢀ  
stabilitiesꢀinꢀtheꢀrangeꢀofꢀ±±2ꢀppbꢀtoꢀ±22ꢀ  
ppb,ꢀoverꢀtheꢀcommercial,ꢀextendedꢀ  
commercialꢀorꢀtheꢀindustrialꢀtemperatureꢀ  
range.ꢀ  
US Headquarters:  
630-851-4722  
European Headquarters:  
+353-61-472221  
TheꢀDOCꢀseriesꢀisꢀavailableꢀwithꢀaꢀCMOSꢀ  
outputꢀandꢀaꢀVoltageꢀControlledꢀOption.ꢀ  
Theseꢀoscillatorsꢀprovideꢀoutstandingꢀphaseꢀ  
noiseꢀcharacteristicsꢀthatꢀwillꢀmeetꢀtheꢀmostꢀ  
stringentꢀrequirements.  
Package Outline  
0.307  
(7.80mm)  
Suggested Pad Layout  
0.375  
0.358  
(9.1mm)  
0.060  
(1.52mm)  
(9.52mm)  
0.085  
(2.16mm)  
0.085  
(2.16mm)  
0.060  
(1.52mm)  
DNC  
0.275  
(6.99mm)  
4
3
2
1
0.100  
(2.54mm)  
0.555  
(14.1mm)  
Top  
View  
0.260  
(6.60mm)  
5
6
0.100  
(2.54mm)  
0.040  
(1.02mm)  
1
0.040  
(1.02mm)  
Keep  
Out  
Area  
DNC = Do Not Connect  
DNC  
0.025  
(0.64mm)  
Bottom  
View  
Top  
View  
Side  
View  
Dimensional Tolerance: +/-0.005 (0.127mm)  
Attention: System Designers please review Application Note AN2093:  
System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators.  
@ www.conwin.com/technologies.html  
Pad Connections  
ꢀ ꢁ:ꢀꢀꢀꢀꢀN/CꢀꢀorꢀVoltageꢀControlꢀ(Vc)  
ꢀ ±:ꢀꢀꢀꢀꢀDoꢀNotꢀConnect*  
ꢀꢀ3ꢀ ꢀꢀꢀꢀGround:  
ꢀꢀ4:ꢀꢀꢀꢀꢀOutput  
ꢀꢀꢂ:ꢀꢀꢀꢀꢀDoꢀNotꢀConnect*  
ꢀꢀ6:ꢀꢀꢀꢀꢀSupplyꢀVoltageꢀ(Vcc)  
*DOꢀNOTꢀconnectꢀ"DNC"ꢀpadsꢀtoꢀgroundꢀorꢀsupplyꢀrails.  
Ordering Information  
F
-010.0M  
DOC  
05  
0
Frequency  
Stability  
Oscillator  
Type  
Output  
Frequency  
Voltage Control  
Option  
Temperature  
Range  
02 = 20 ppb  
05 = 50 ppb  
10 = 100 ppb  
25 = 250 ppb  
3.3 Vdc  
LVCMOS Output  
Surface Mount  
OCXO  
Frequency  
Format  
-xxx.xM Min.*  
-xxx.xxxxxxM Max*  
F = OCXO  
(Fixed Freq.)  
V = VCOCXO  
(Voltage Controlled)  
0 = 0 to 70°C  
1 = -20 to 75°C  
2 = -40 to 85°C  
3 = -40 to 70°C  
*Amount of  
numbers after the  
decimal point.  
M = MHz  
Bulletin  
Cx207  
1 of 4  
Page  
Example Part Numbers:  
Revision  
20  
DOC050F-010.0M = 9x14mm package, ±50 ppb, 0 to 70°C, 3.3 Vdc, CMOS Output, OCXO, Output Frequency 10.0 MHz  
DOC022V-020.0M = 9x14mm package, ±20 ppb, -40 to 85°C, 3.3 Vdc, CMOS Output, VCOCXO, 20.0 MHz  
Date  
19 Nov 2013  
2111 Comprehensive Drive  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630-851-5040  
www.conwin.com  
Absolute Maximum Ratings  
Parameter  
Minimum  
-ꢂꢂꢀ  
Nominal  
Maximum  
ꢁ±ꢂꢀ  
4.ꢂꢀ  
Vcc+2.ꢂꢀ  
Units  
°C  
Vdc  
Vdc  
Notes  
StorageꢀTemperatureꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
SupplyꢀVoltageꢀ-ꢀ3.3ꢀVdcꢀ(Vcc)ꢀ  
ControlꢀVoltageꢀ(Vc)ꢀ  
-2.ꢂꢀ  
-2.ꢂꢀ  
Operating Specifications  
Parameter  
CenterꢀFrequency:ꢀꢀ(Fo)ꢀ  
Minimum  
Nominal  
Maximum  
Units  
MHzꢀ  
Notes  
ꢀꢀꢁ2,ꢀꢁ±.8,ꢀꢁ9.44,ꢀ±2,ꢀ±ꢂ,ꢀ38.88,ꢀ42,ꢀꢂ2ꢀorꢀ82ꢀ  
FrequencyꢀStabilityꢀvs.ꢀChangeꢀinꢀTemperature:ꢀ(SeeꢀOrderingꢀInformation)ꢀ  
StabilityꢀCodeꢀ2±ꢀ  
StabilityꢀCodeꢀ2ꢂꢀ  
StabilityꢀCodeꢀꢁ2ꢀ  
-±2.2ꢀ  
-ꢂ2.2ꢀ  
-ꢁ22.2ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
±2.2ꢀ  
ꢂ2.2ꢀ  
ꢁ22.2ꢀ  
ppbꢀ  
ppbꢀ  
ppbꢀ  
ꢁꢀ  
ꢁꢀ  
OperatingꢀTemperatureꢀRange:ꢀ(SeeꢀOrderingꢀInformation)ꢀ  
TemperatureꢀCodeꢀ2ꢀ  
TemperatureꢀCodeꢀꢁꢀ  
TemperatureꢀCodeꢀ±ꢀ  
TemperatureꢀCodeꢀ3ꢀ  
ꢀꢀꢀ2ꢀ  
-±2ꢀ  
-42ꢀ  
-42ꢀ  
-ꢁ.2ꢀ  
-±2ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
72ꢀ  
7ꢂꢀ  
8ꢂꢀ  
72ꢀ  
ꢁ.2ꢀ  
±2ꢀ  
±2ꢀ  
ꢁ2ꢀ  
322ꢀ  
4.62ꢀ  
3.47ꢀ  
°Cꢀ  
°Cꢀ  
°Cꢀ  
°C  
FrequencyꢀCalibration:ꢀꢀ  
ppmꢀꢀ  
ppbꢀ  
ppbꢀ  
ppb/dayꢀ  
ppbꢀ  
ppmꢀ  
Vdcꢀ  
±
±5  
±5  
3
3
4
FrequencyꢀStabilityꢀvsꢀLoadꢀ ꢀ  
FrequencyꢀStabilityꢀvsꢀVoltageꢀ  
-±2ꢀ  
-ꢁ2ꢀ  
-322ꢀ  
-4.62ꢀ  
3.ꢁ3ꢀ  
Aging:ꢀDaily:ꢀꢀ  
Aging:ꢀFirstꢀYear:ꢀ  
TotalꢀFrequencyꢀToleranceꢀ(±2ꢀYears)ꢀ  
SupplyꢀVoltage:ꢀ(Vcc)ꢀꢀ  
-ꢀ  
3.32ꢀ  
PowerꢀConsumption:ꢀVccꢀ=ꢀNominalꢀVoltageꢀ  
ꢀꢀꢀꢀꢀCommercialꢀTemperatureꢀRange,ꢀ2ꢀtoꢀ72ꢀ°Cꢀ  
TurnꢀOnꢀ  
SteadyꢀStateꢀ@ꢀ±ꢂ°Cꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
±.ꢂꢀ  
ꢁ.ꢁꢀ  
Wꢀ  
Wꢀ  
ꢀꢀꢀꢀꢀIndustrialꢀTemperatureꢀRange,ꢀ-42ꢀtoꢀ8ꢂꢀ°Cꢀ  
TurnꢀOnꢀ  
SteadyꢀStateꢀ@ꢀ±ꢂ°Cꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
2.ꢂꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
3.2ꢀ  
ꢁ.3ꢀ  
ꢁ.2ꢀ  
Wꢀ  
Wꢀ  
psꢀRMS  
PhaseꢀJitter:ꢀ(BW:ꢀꢁ±ꢀKHzꢀtoꢀFo/±)ꢀ  
ShortꢀTermꢀStabilityꢀ  
Start-UpꢀTime:ꢀ  
WarmꢀUpꢀTimeꢀꢀ(WithinꢀSpecificationꢀ@ꢀ±ꢂ°C)ꢀ  
WarmꢀUpꢀTimeꢀꢀ(WithinꢀSpecificationꢀ@ꢀ-42°C)ꢀ  
ꢁ.2E-9/sꢀ  
ꢁ2ꢀ  
msꢀ  
s
s
62ꢀ  
92ꢀ  
-ꢀ  
CMOS Output Characteristics  
Parameter  
Minimum  
Nominal  
Maximum  
Units  
Notes  
Loadꢀ  
OutputꢀVoltage:  
ꢀꢀꢀOutputꢀVoltage:ꢀꢀHighꢀ(Voh)ꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀLowꢀ(Vol)ꢀ  
ꢀꢀꢀOutputꢀCurrent:ꢀꢀHighꢀ(Ioh)ꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀLowꢀ(Iol)ꢀ  
-ꢀ  
ꢁꢂꢀ  
-ꢀ  
pFꢀ  
6
-ꢀ  
±.7ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
4ꢂꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
V
Vꢀ  
2.3ꢀ  
-4ꢀ  
-ꢀ  
mAꢀ  
mA  
5
-ꢀ  
ꢀ4ꢀ  
DutyꢀCycleꢀatꢀꢂ25ꢀofꢀVccꢀ  
Riseꢀ/ꢀFallꢀTime:ꢀꢁ25ꢀtoꢀ925ꢀꢀ  
ꢂ2ꢀ  
-ꢀ  
ꢂꢂꢀ  
6.ꢂꢀ  
ns  
Input Characteristics - Voltage Controlled Option  
Parameter  
Minimum  
2.32ꢀ  
±2.2ꢀ  
ꢁ22Kꢀ  
±ꢀ  
Nominal  
Maximum  
Units  
Vꢀ  
ppmꢀ  
Ohms  
5
Notes  
7
8
ControlꢀVoltageꢀRange:ꢀ  
FrequencyꢀPullability:ꢀ  
InputꢀImpedanceꢀ  
ꢁ.6ꢂꢀ  
3.22ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
Linearityꢀ  
Bulletin  
Page  
Cx207  
2 of 4  
20  
Attention: System Designers please review Application Note AN2093:  
System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators.  
@ www.conwin.com/technologies.html  
Revision  
Date  
19 Nov 2013  
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches.  
© Copyright 2014The Connor-Winfield Corporation Not intended for life support applications.  
2111 Comprehensive Drive  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630-851-5040  
www.conwin.com  
Phase Noise Characteristics  
Typical Phase Noise for DOC050F - 010.0M  
Parameter  
Minimum  
Nominal  
-67ꢀ  
Maximum  
Units  
Notes  
@ꢀꢁꢀHzꢀoffsetꢀꢀ  
@ꢀꢁ2ꢀHzꢀoffsetꢀ  
@ꢀꢁ22ꢀHzꢀoffsetꢀ  
@ꢀꢁꢀKHzꢀoffsetꢀ  
@ꢀꢁ2ꢀKHzꢀoffsetꢀ  
@ꢀꢁ22ꢀKHzꢀoffsetꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
-ꢀ  
dBC/Hzꢀ  
dBC/Hzꢀ  
dBC/Hzꢀ  
dBC/Hz  
dBC/Hzꢀ  
dBC/Hz  
-ꢁ22ꢀ  
-ꢁ32ꢀ  
-ꢁ48ꢀ  
-ꢁꢂ4ꢀ  
-ꢁꢂꢂꢀ  
Package Characteristics  
DOCꢀPackageꢀ  
PackageꢀconsistingꢀofꢀaꢀFR-4ꢀsubstrateꢀandꢀRyton-R-4ꢀcover.ꢀWaterꢀResistantꢀpackage,ꢀ  
non-hermeticꢀseal.ꢀ(EngineeringꢀPropertiesꢀofꢀRytonꢀR-4ꢀApplicationꢀNoteꢀAN±ꢁ22)  
Environmental Characteristics  
Shockꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢂ22ꢀG’sꢀꢁms,ꢀHalfsine,ꢀ3ꢀshocksꢀperꢀdirection,ꢀperꢀMIL-STDꢀ±2±G,ꢀMethodꢀ±ꢁ3BꢀTestꢀConditionꢀD.  
Sinusoidal Vibrationꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ2.26”ꢀD.A.ꢀorꢀꢁ2G’sꢀPeak,ꢀꢁ2ꢀtoꢀꢂ22ꢀHz,ꢀperꢀMIL-STD-±2±G,ꢀMethodꢀ±24D,ꢀTestꢀConditionꢀA.  
Random Vibrationꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢂ.3ꢂꢀG’sꢀrms.ꢀ±2ꢀtoꢀ±222ꢀHzꢀperꢀMIL-STD-±2±G,ꢀMethodꢀ±ꢁ4,TestꢀConditionꢀꢁA,ꢀꢁꢂꢀminutesꢀeachꢀaxis.  
Moistureꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢁ2ꢀcycles,ꢀ9ꢂ5ꢀRH,ꢀPerꢀMIL-STD-±2±G,ꢀMethodꢀꢁꢁ±.  
Marking Permanency ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀPerꢀMIL-STD-±2±G,ꢀMethodꢀ±ꢁꢂJ.  
Solder Process Recommendations:ꢀRoHSꢀcompliant,ꢀleadꢀfree.ꢀSeeꢀsolderꢀprofileꢀonꢀpageꢀ4.  
ꢀꢀꢀꢀꢀIn-line reflow:ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀReferꢀtoꢀrecommendedꢀreflowꢀpre-heatꢀandꢀreflowꢀtemperaturesꢀonꢀpageꢀ4.ꢀPackageꢀmaterialꢀꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀconsistꢀofꢀRytonꢀR-4ꢀhighꢀtemperatureꢀcoverꢀwithꢀFR4ꢀsubstrate.ꢀComponentꢀsolderꢀisꢀPbꢀfreeꢀhighꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀtemperatureꢀeutecticꢀalloyꢀwithꢀaꢀmeltingꢀpointꢀofꢀ±±ꢁ°C.|ꢀ  
ꢀꢀꢀꢀꢀIn-line oven profile:ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀWeꢀrecommendꢀusingꢀKICꢀprofilerꢀorꢀsimilarꢀdeviceꢀplacingꢀoneꢀofꢀtheꢀthermocouplesꢀonꢀtheꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀdeviceꢀtoꢀinsureꢀthatꢀtheꢀinternalꢀpackageꢀtemperatureꢀdoesꢀnotꢀexceedꢀ±±ꢁ°C.ꢀ  
ꢀꢀꢀꢀꢀRemoval of device:ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀIfꢀforꢀanyꢀreasonꢀtheꢀdeviceꢀneedsꢀtoꢀbeꢀremovedꢀfromꢀtheꢀboard,ꢀuseꢀaꢀtemperatureꢀcontrolledꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀrepairꢀstationꢀwithꢀprofileꢀmonitoringꢀcapabilities.ꢀFollowingꢀaꢀmonitoredꢀprofileꢀwillꢀinsureꢀtheꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀdeviceꢀisꢀproperlyꢀpre-heatedꢀpriorꢀtoꢀrelow.ꢀReferꢀtoꢀIPCꢀ6ꢁ2Eꢀforꢀinspectionꢀguidelines.  
Recommended Cleaning Process:ꢀ(Ifꢀrequired)  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀDeviceꢀisꢀnon-hermetic,ꢀwaterꢀresistanceꢀwithꢀfourꢀweepꢀholes,ꢀoneꢀinꢀeachꢀcornerꢀtoꢀallowꢀꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀmoistureꢀtoꢀbeꢀremovedꢀduringꢀtheꢀdryingꢀcycle.ꢀWeꢀrecommendꢀin-lineꢀwarmꢀwaterꢀwashꢀꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀwithꢀairꢀknifeꢀandꢀdryingꢀcapabilities.ꢀIfꢀcleanerꢀdoesꢀnotꢀhaveꢀdryingꢀcapability,ꢀthenꢀuseꢀhotꢀairꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀcirculatedꢀoven.ꢀBoardsꢀshouldꢀbeꢀplacedꢀinꢀtheꢀovenꢀverticallyꢀforꢀgoodꢀwaterꢀrunoffꢀ  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀDevice must be dried properly prior to use!  
ꢀꢀꢀꢀꢀNote:ꢀIfꢀsaponifierꢀisꢀusedꢀmakeꢀsureꢀtheꢀdeviceꢀisꢀrinsedꢀproperlyꢀtoꢀinsureꢀallꢀresiduesꢀareꢀremoved.ꢀPHꢀofꢀsaponifierꢀshould  
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀnotꢀꢀexceedꢀꢁ2.ꢀ  
ꢀꢀꢀꢀꢀDrying Temperature:ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀBetweenꢀ8ꢂꢀtoꢀꢁ22°C.  
ꢀꢀꢀꢀꢀDrying Time:ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀTimeꢀwillꢀvaryꢀdependingꢀonꢀtheꢀboardꢀsize.  
Caution: Do not submerge the device!  
Notes:  
ꢀ 1.ꢀFrequencyꢀstabilityꢀvs.ꢀchangeꢀinꢀtemperature.ꢀ[± ±Fmaꢁꢀ-ꢀFmin)/±2*Fo)].  
ꢀ 2.ꢀInitialꢀcalibrationꢀ@ꢀ25°C.ꢀForꢀOCXOꢀwithꢀEFT,ꢀtheꢀcontrolꢀvoltageꢀmustꢀbeꢀfiꢁed.  
ꢀ 3.ꢀAfterꢀ30ꢀdaysꢀofꢀoperation  
ꢀ 4.ꢀInclusiveꢀofꢀcalibrationꢀ@ꢀ25°C,ꢀfrequencyꢀvs.ꢀchangeꢀinꢀtemperature,ꢀchangeꢀinꢀsupplyꢀvoltageꢀ±± 5ꢂ),ꢀloadꢀchangeꢀ±± 5ꢂ),ꢀshockꢀandꢀvibrationꢀꢀ  
ꢀ ꢀ andꢀ20ꢀyearsꢀaging  
ꢀ 5.ꢀMinimumꢀ"PowerꢀOnꢀTime"ꢀafterꢀrailꢀrisesꢀfromꢀ0ꢀtoꢀwithinꢀ+/-5ꢂꢀofꢀVccꢀ=ꢀ1ꢀsecond.ꢀꢀ  
ꢀ ꢀ Vccꢀrampꢀrateꢀmustꢀbeꢀ<0.3ꢀvoltsꢀperꢀmillisecond.ꢀ  
ꢀ 6.ꢀAttention:ꢀToꢀachieveꢀoptimalꢀfrequencyꢀstability,ꢀandꢀinꢀsomeꢀcasesꢀtoꢀmeetꢀtheꢀspecificationꢀstatedꢀonꢀthisꢀdataꢀsheet,ꢀitꢀisꢀrequiredꢀthatꢀtheꢀcircuitꢀꢀ  
ꢀ ꢀ connectedꢀtoꢀthisꢀOCXOꢀoutputꢀmustꢀhaveꢀtheꢀequivalentꢀinputꢀcapacitanceꢀthatꢀisꢀspecifiedꢀbyꢀtheꢀnominalꢀloadꢀcapacitance.ꢀDeviationsꢀfromꢀtheꢀꢀ  
ꢀ ꢀ nominalꢀloadꢀcapacitanceꢀwillꢀhaveꢀaꢀgraduatedꢀeffectꢀonꢀtheꢀstabilityꢀofꢀapproꢁimatelyꢀ20ꢀppbꢀperꢀpFꢀloadꢀdifference.  
ꢀ 7.ꢀPositiveꢀslope.ꢀ±FrequencyꢀincreasesꢀasꢀVcꢀvoltageꢀincreases.ꢀToꢀensureꢀproperꢀoperationꢀofꢀVCOCXO's,ꢀtheꢀcontrolꢀvoltageꢀinputꢀmustꢀbeꢀbiasedꢀꢀ  
ꢀ ꢀ theꢀnominalꢀcontrolꢀvoltage.ꢀFailureꢀtoꢀbiasꢀtheꢀVcꢀinputꢀwillꢀcauseꢀanꢀunstableꢀoutputꢀcondition.  
ꢀ 8.ꢀReferencedꢀtoꢀFo.  
Bulletin  
Cx207  
3 of 4  
20  
Page  
Attention: System Designers please review Application Note AN2093:  
System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators.  
@ www.conwin.com/technologies.html  
Revision  
Date  
19 Nov 2013  
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches.  
© Copyright 2014The Connor-Winfield Corporation Not intended for life support applications.  
2111 Comprehensive Drive  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630-851-5040  
www.conwin.com  
CMOS Output Waveform  
CMOS Test Circuit  
DNC  
Output  
10uF  
to  
100 uF  
0.01uF  
2
15 pF  
DNC  
Pad 1  
OCXO = N/C  
VCOCXO = Vc  
DNC = Do Not Connect  
DO NOT connect "DNC" pads  
to ground or supply rails.  
1V/Div  
Phase Noise Plot  
RoHS Solder Profile  
Typical phase noise plot for DOC050F-010.0M  
Temperature  
260°C  
260°C  
220°C  
180°C  
150°C  
120°C  
0
10 s  
Up to 120 s  
Typical  
60 to 90 s  
Typical  
Meets IPC/JEDEC J-STD-020C  
Tape and Reel Information  
SM-MECH42  
Bulletin  
Page  
Cx207  
4 of 4  
20  
Attention: System Designers please review Application Note AN2093:  
System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators.  
@ www.conwin.com/technologies.html  
Revision  
Date  
19 Nov 2013  
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. Not intended for life support applications.  
All dimensions in inches. © Copyright 2013 The Connor-Winfield Corporation  

相关型号:

DOC050V-049.152M

CMOS Output Clock Oscillator,
CONNOR-WINFIE

DOC050V-050.0M

CMOS Output Clock Oscillator
CONNOR-WINFIE

DOC050V-080.0M

CMOS Output Clock Oscillator
CONNOR-WINFIE

DOC052F-010.0M

OSC OCXO 10.000MHZ LVCMOS SMD
CONNOR-WINFIE

DOC052F-012.8M

OSC OCXO 12.8MHZ LVCMOS SMD
CONNOR-WINFIE

DOC052F-019.44M

OSC OCXO 19.44MHZ LVCMOS SMD
CONNOR-WINFIE

DOC052V-010.0M

OSC VCOCXO 10.000MHZ LVCMOS SMD
CONNOR-WINFIE

DOC052V-012.8M

OSC VCOCXO 12.8MHZ LVCMOS SMD
CONNOR-WINFIE

DOC052V-019.44M

OSC VCOCXO 19.44MHZ LVCMOS SMD
CONNOR-WINFIE

DOC052V-020.0M

OSC VCOCXO 20.000MHZ LVCMOS SMD
CONNOR-WINFIE

DOC053V-080.0M

CMOS Output Clock Oscillator
CONNOR-WINFIE

DOC100F-010.0M

CMOS Output Clock Oscillator, 10MHz Min, 25MHz Max, 10MHz Nom, ROHS COMPLIANT PACKAGE-6
CONNOR-WINFIE