首页 |元器件品牌

FPHA554-155.52MHZ [CONNOR-WINFIELD]

PECL Output Clock Oscillator, 44.736MHz Min, 200MHz Max, 155.52MHz Nom;
FPHA554-155.52MHZ
型号： FPHA554-155.52MHZ
厂家： CONNOR-WINFIELD CORPORATION    CONNOR-WINFIELD CORPORATION
描述：

PECL Output Clock Oscillator, 44.736MHz Min, 200MHz Max, 155.52MHz Nom

机械 输出元件 振荡器
文件： 总2页 (文件大小：122K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
THE CONNOR-WINFIELD CORP.  
2111 COMPREHENSIVE DRIVE.  
AURORA, IL 60505.  
FAX (630) 851-5040.  
PHONE (630) 851-4722.  
HTTP://WWW.CONWIN.COM  
P R O D U C T D A T A S H E E T  
CRYSTAL CONTROLLED OSCILLATORS  
CW 0503  
FPHA554  
155.52M  
SURFACE MOUNT 5.0V PECL CLOCK  
FPHA554  
ABSOLUTE MAXIMUM RATINGS  
PARAMETER  
TABLE 1.0  
NOTE  
UNITS  
MINIMUM NOMINAL MAXIMUM  
-40 85  
-0.5 7.0  
UNITS  
°C  
Storage Temperature  
-
DESCRIPTION  
Supply Voltage  
(Vcc)  
-
Vdc  
The Connor-Winfield  
OPERATING SPECIFICATIONS  
PARAME TER  
TABLE 2.0  
NOTE  
FPHA554 is a fixed frequency  
surface mount Crystal  
MINIMUM NOMINAL MAXIMUM  
UNITS  
MHz  
Center Frequency  
(Fo)  
44.736  
-
200  
Controlled Oscillator (XO)  
designed for applications  
requiring low jitter and tight  
frequency stability. Operating  
at 5.0V supply voltage, the  
FPHA554 provides PECL  
Differential Outputs with an  
enable/disable function.  
Total Frequency Tolerance  
Operating Temperature Range  
Supply Voltage  
-15  
15  
ppm  
1
0
-
5.0  
-
70  
°C  
(Vcc)  
(Icc)  
4.75  
5.25  
Vdc  
Supply Current  
-
-
-
-
-
-
-
-
70  
5
1
-
mA  
Jitter (BW=10Hz to 20MHz)  
Jitter (BW=12kHz to 20MHz)  
SSB Phase Noise at 10Hz offset  
SSB Phase Noise at 100Hz offset  
SSB Phase Noise at 1KHz offset  
SSB Phase Noise at 10KHz offset  
SSB Phase Noise at 10KHz offset  
-
pS RMS  
pS RMS  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
-
-60  
-90  
-100  
-125  
-135  
-
-
-
-
INPUT CHARACTERISTICS  
PARAMETER  
TABLE 3.0  
MINIMUM NOMINAL MAXIMUM  
UNITS  
Vdc  
NOTE  
FEATURES  
-
Disable Input Voltage (High)  
Enable Input Voltage (Low)  
(Vih)  
(Vil)  
3.96  
-
2
2
-
-
3.40  
Vdc  
5.0V OPERATION  
PECL OUTPUT CHARACTERISTICS  
TABLE 4.0  
NOTE  
3
LOW JITTER <1ps RMS  
PARAMETER  
MINIMUM NOMINAL MAXIMUM  
UNITS  
Ohms  
Vdc  
Vdc  
%
LOAD  
-
3.96  
-
-
-
50  
-
OVERALL FREQUENCY TOLERANCE:  
±15ppm  
Voltage  
(High)  
(Low)  
(Voh)  
(Vol)  
-
3.40  
55  
1
TEMPERATURE RANGE: 0 to 70°C  
PECL DIFFERENTIAL OUTPUTS  
ENABLE / DISABLE  
Duty Cycle  
45  
-
50  
-
4
Rise / Fall Time 20% to 80%  
nS  
PACKAGE CHARACTERISTICS  
TABLE 5.0  
Package  
Non-hermetic package consisting of an FR4 substrate with grounded metal  
cover.  
SURFACE MOUNT PACKAGE  
TAPEAND REEL PACKAGING  
PROCESS RECOMMENDATIONS  
TABLE 6.0  
The component solder used internal to this device has a melting point of  
221°C. The peak temperature inside the device should be less than or  
equal to 220°C for a maximum of 10 seconds  
Solder Reflow  
Wash  
Ultrasonic cleaning is not recommended.  
Notes  
ORDERING INFORMATION  
1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 10 years aging.  
2) When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high state (VoH).  
3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent.  
4) Duty Cycle measured at 3.67V  
FPHA554 - 155.52MHz  
ECL  
SERIES  
CENTER  
FREQUENCY  
Specifications subject to change without notice.  
Copyright 2001 Connor-Winfield all rights reserved.  
a
EC213  
1
2
00  
01/26/05  
DATE:  
DATASHEET #:  
PAGE  
OF  
REV:  
THE CONNOR-WINFIELD CORP.  
2111 COMPREHENSIVE DRIVE.  
AURORA, IL 60505.  
FAX (630) 851-5040.  
PHONE (630) 851-4722.  
HTTP://WWW.CONWIN.COM  
P R O D U C T D A T A S H E E T  
CRYSTAL CONTROLLED OSCILLATORS  
Pin Connection  
1 N/C  
2
Enable / Disable  
N/C  
3
4
Ground  
N/C  
5
6
Q Output  
Q Output  
N/C  
7
8
9
Vcc  
10  
N/C  
Dimensional Tolerance:  
±.005 (.127mm)  
SUGGESTED PAD LAYOUT  
OUTPUT WAVEFORM  
“1” LEVEL  
“0” LEVEL  
ENABLE/  
DISABLE  
Specifications subject to change without notice.  
EC213  
01  
2
2
01/26/05  
DATE:  
Copyright 2001 Connor-Winfield all rights reserved.  
a
DATASHEET #:  
PAGE  
OF  
REV:  

相关型号：

FPHA554-44.736MHZ

 Oscillator, 44.736MHz Min, 200MHz Max, 44.736MHz Nom
CONNOR-WINFIE

FPHA554-FREQ

 PECL Output Clock Oscillator, 44.736MHz Min, 200MHz Max
CONNOR-WINFIE

FPHA554G

 5.0V SURFACE MOUNT PECL CLOCK
CONNOR-WINFIE

FPHA554G-044.736M

 PECL Output Clock Oscillator, 44.736MHz Nom, ROHS COMPLIANT PACKAGE-10
CONNOR-WINFIE

FPHA554G-155.52

 5.0V SURFACE MOUNT PECL CLOCK
CONNOR-WINFIE

FPHA554G-155.52M

 PECL Output Clock Oscillator, 155.52MHz Nom, ROHS COMPLIANT PACKAGE-10
CONNOR-WINFIE

FPHA554G-200.000M

 Oscillator
CONNOR-WINFIE

FPHA554G-200.00M

 PECL Output Clock Oscillator, 200MHz Nom, ROHS COMPLIANT PACKAGE-10
CONNOR-WINFIE

FPHA554G-44.736M

 PECL Output Clock Oscillator, 44.736MHz Nom, ROHS COMPLIANT PACKAGE-10
CONNOR-WINFIE

FPHA554G-FREQ

 PECL Output Clock Oscillator, 44.736MHz Min, 200MHz Max, ROHS COMPLIANT PACKAGE-10
CONNOR-WINFIE

FPHD54T2

 SURFACE MOUNT 5.0V PECL CLOCK
CONNOR-WINFIE

FPHD54T2-016.00M

 PECL Output Clock Oscillator, 16MHz Nom, ROHS COMPLIANT PACKAGE-4
CONNOR-WINFIE
©2020 ICPDF网 联系我们和版权申明