HSM623-1.00MHZ [CONNOR-WINFIELD]
Oscillator, 1MHz Min, 170MHz Max, 1MHz Nom;型号: | HSM623-1.00MHZ |
厂家: | CONNOR-WINFIELD CORPORATION |
描述: | Oscillator, 1MHz Min, 170MHz Max, 1MHz Nom |
文件: | 总2页 (文件大小:163K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.3V Surface Mount
Crystal Clock Oscillator
HSM6
Features:
1.0 to 170 MHz
XO)
3.3V Operation
RoHS Compliant
Tri-State Enable/Disable
Power Saving Function: 10uA When Disabled
Overall Frequency Tolerance:
HSM613 25 ppm
HSM623 50 ppm
HSM633 100 ppm
Temperature Range: -40 to 85°C
Ceramic Surface Mount Package
Tape and Reel Packaging
The Connor-Winfield HSM613, HSM623,
and HSM633 are 7.5mm x 5mm, 3.3V
HCMOS, Surface Mount, Fixed Frequency
Crystal Oscillators (XO) designed for use in all
applications requiring precision clocks. The RoHS
compliant surface mount package is designed for
high-density mounting and is optimum for mass
production.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
US Headquarters:
630-851-4722
Absolute Maximum Ratings
European Headquarters:
+353-61-472221
Parameter
Storage Temperature
Supply Voltage (Vcc)
Minimum
-55
Nominal
Maximum
125
Units
°C
Notes
-
-
-0.5
5.0
Vdc
Operating Specifications
Parameter
Minimum
Nominal
Maximum
Units
MHz
Notes
Frequency Range (Fo)
1.0
-
HSM613
125
170
170
HSM623
HSM633
Frequency Tolerance
-
ppm
1
HSM613
-25
-50
-100
25
50
100
HSM623
HSM633
Operating Temp Range
Supply Voltage (Vdd)
-40
3.0
-
-
3.3
-
85
3.6
°C
Vdc
mA
Supply Current (Icc)
1.000 to 31.999 MHz
32 to 49.999 MHz
50 to 66.999 MHz
67 to 124.999 MHz
125 to 170 MHz
15
20
25
40
50
Input Characteristics
Parameter
Minimum
≥ 70% Vdd
Nominal
Maximum
Units
Vdc
Vdc
mS
nS
uA
Notes
Enable Voltage - (Vih)
Disable Voltage - (Vil)
Enable Time
Disable Time
Output Disable Current (lcc)
-
-
-
-
-
-
≤ 30% Vdd
10
2
-
-
-
-
150
10
HCMOS Output Characteristics
Parameter
Load
Voltage High (Voh)
Low (Vol)
Current High (loh)
Low (lol)
Minimum
Nominal
Maximum
Units
pF
Vdc
Notes
-
2.91
-
-2
-
-
-
-
-
-
15
-
0.33
-
mA
2
Duty Cycle at 50% of Vcc
Rise / Fall Time: 20% to 80%
1.000 to 19.999 MHz
20.00 to 49.999 MHz
50.00 to 99.9999 MHz
100.00 to 170 MHz
45
50
55
%
-
-
-
-
-
-
-
3.0
2.0
1.5
0.5
-
-
-
6.0
4.0
3.0
1.0
10
5
nS
Start-Up Time
mS
pS RMS
Bulletin
Jitter
(10 Hz to 20 MHz)
(12 kHz to 20 MHz)
Sm044
1
Revision
13
Notes:
Date
27 March 2012
ꢀ 1.ꢀInclusiveꢀofꢀcalibrationꢀ@ꢀ25°Cꢀ,ꢀfrequencyꢀstabilityꢀvsꢀtemperature,ꢀsupplyꢀvoltageꢀchange,ꢀloadꢀchange,ꢀshockꢀandꢀvibration,ꢀ10ꢀyearsꢀaging.
ꢀ 2.ꢀOscillatorꢀoutputꢀisꢀenabledꢀwithꢀnoꢀconnectionꢀonꢀpadꢀ1
Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Package Characteristics
Hermetically sealed ceramic package and metal cover
Suggested Pad Layout
Package
Environmental Characteristics
Temperature Cycle The specimen shall meet electrical characteristics after
tested 5 cycles of -55°C / 30 minutes and +125°C / 30 minutes
Hermetical No bubbles appear in Flourinert (FC-43) at 125°C 5°C for 5 minutes
Solvent Resistance
Marking will withstand immersion in
Isopropyl Alcohol or Trichloroethylene
Soldering
General Conditions 260°C max x 10 sec max x 2 times max or
230°C max x 180 sec max x 1 time
Typical Operation Data
(Vapor phase reflow)
20 to 100 sec up to 215°C, 50 sec
Test Circuit
at 215°C, then down to room temperature per 1 to 5°C / sec
Mechanical Characteristics
Free Drop
Vibration
The specimen shall meet electrical characteristics after tested 3 times,
Free Drop testing on the hard wooden board from a height of 75 cm.
The specimen shall meet electrical characteristics after tested
by the following conditions: 10-55Hz 1.5mm Amplitude,
55-2000 Hz 20 G's, 2 hours for each plane
Thermal Shock
Solderability
After applied Thermal Shock of 260°C
max x 10 sec max x 2 times, or 230°C max x 180 sec max,
the specimen shall meet electrical characteristics
(EIAJ-RCX-0102.101 Condition 1a)
1) Flux: MIL-F-14256 (WW Rosin=25%, Isopropyl Alcohol = 75%)
2) Solder: QQ-S-571 (Sn = 63%, Pb = 37%)
Output Waveform
3) Solder bath temperature: 235°C 5°C
4) Depth of immersion: Up to electrical terminal
5) Immersing time: Within 2 sec 0.5 sec into solder bath
T
T
F
R
"1" LEVEL
After performing the above procedures, a newly soldered coverage shall be greater than 90%
80%
50%
20%
Pin Connections
1: Tri-State E/D
2: Ground
"0" LEVEL
SYMMETRY
3: Output
4: VDD
Ordering Information
Dimensional Tolerance: ± ±.02 ꢀ±ꢁ.ꢂmmꢃ
± ±..ꢁ2 ꢀ±ꢄ0ꢅmmꢃ
HSM633 - 125.0M
Tape and Reel Dimensions
CLOCK
SERIES
CENTER
FREQUENCY
Bulletin
Sm044
Revision
Date
13
Dimensional Tolerance: ± ±.02 ꢀ±
± ±..ꢁ2 ꢀ±ꢄ
27 March 2012
Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation
相关型号:
HSM623-1.544M
HCMOS Output Clock Oscillator, 1.544MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE
HSM623-133.33MHZ
HCMOS Output Clock Oscillator, 1.544MHz Min, 170MHz Max, 133.33MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE
HSM623-170.0M
HCMOS Output Clock Oscillator, 170MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE
HSM623-24.0M
HCMOS Output Clock Oscillator, 24MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE
HSM623-24.576M
HCMOS Output Clock Oscillator, 24.576MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE
©2020 ICPDF网 联系我们和版权申明