HSM92-1.00MHZ [CONNOR-WINFIELD]
Oscillator, 1MHz Min, 80MHz Max, 1MHz Nom, Hybrid;
| 型号： | HSM92-1.00MHZ |
| 厂家： | 
CONNOR-WINFIELD CORPORATION |
| 描述： | Oscillator, 1MHz Min, 80MHz Max, 1MHz Nom, Hybrid |
| 文件： | 总2页 (文件大小：51K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
3 .3 V S u rfa c e Mo u n t
Crys t a l Clo c k Os c illa t o r
HS M9
XO
Features:
1.0 to 80 MHz
The Connor-Winfield HSM91, HSM92,
HSM93, and HSM94 models are
7.5mm x 5mm, 5.0V HCMOS, Surface
Mount, Fixed Frequency Crystal
Oscillators (XO) designed for use in all
applications requiring precision clocks.
The surface mount package is designed
for high-density mounting and is optimum
for mass production
2111 Com prehensive Drive
5.0V Operation
Aurora, Illinois 60505
Tri-State Enable / Disable
Overall Frequency Tolerance:
Phone: 630-851-4722
HSM94 ± 20 ppm,
HSM92 ± 50 ppm,
HSM91 ± 25 ppm
HSM93 ± 100 ppm
Fax: 630- 851- 5040
w w w .c o n w in .c o m
Temperature Range: 0 to 70°C
Ceramic Surface Mount Package
Tape and Reel Packaging
Absolute Maximum Ratings
Parameter
Minimum
-55
-0.5
Nominal
Maximum
Units
°C
Notes
Storage Temperature
Supply Voltage (Vcc)
-
125
7.0
-
Vdc
Operating Specifications
Parameter
Minimum
Nominal
Maximum
Units
Notes
Frequency Range (Fo)
HSM94
-
80
MHz
1.8
1.0
1.0
1.0
HSM91
HSM92
HSM93
Frequency Tolerance
HSM94
-
ppm
1
-20
-25
20
25
HSM91
HSM92
HSM93
-50
50
-100
100
Operating Temp Range
Supply Voltage (Vdd)
0
4.5
-
-
5.0
-
70
°C
Vdc
mA
5.5
Supply Current (Icc)
1.0 to 31.999 MHz
32 to 49.999 MHz
50 to 80.0 MHz
27
45
75
Input Characteristics
Parameter
Minimum
Nominal
Maximum
Units
Vdc
Vdc
mS
Notes
Enable Voltage - (Vih)
Disable Voltage - (Vil)
Enable Time
2.2
-
-
-
-
-
2
-
-
-
.08
100
100
Disable Time
nS
HCMOS Output Characteristics
Parameter
Minimum
Nominal
Maximum
Units
Notes
Load
-
-
50
pF
High (Voh)
Voltage
4.5
-
-
-
-
Vdc
mA
Low (Vol)
0.55
US Headquarters:
630-851-4722
High (loh)
Current
-16
-
-
-
-
16
Low (lol)
European Headquarters:
Duty Cycle at 50% of Vcc
Rise / Fall Time 10% to 90%
Start-Up Time
45
-
50
-
55
6
%
nS
+353-61-472221
-
-
10
5
mS
Bulletin
Sm006
Jitter
-
-
pS RMS
Page
1 of 2
Revision
Notes:
23
1. Inclusive of calibration @ 25°C , frequency vs temperature stability, supply voltage change, load change, shock and vibration, 10 years aging.
2. Oscillator output is enabled with no connection on pad 1
Date
28 March 2002
Specifications subject to change without notice. All dimensions in inches. © Copyright 1998 The Connor-Winfield Corporation
2111 Com prehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630- 851- 5040
w w w .c o n w in .c o m
Package Characteristics
Hermetically sealed ceramic package and metal cover
Suggested Pad Layout
Package
Environmental Characteristics
Temperature Cycle
The specimen shall meet electrical characteristics after
tested 5 cycles of -55°C / 30 minutes and +125°C / 30 minutes
Hermetical
No bubbles appear in Flourinert (FC-43) at 125°C ±5°C for 5 minutes
Solvent Resistance
Marking will withstand immersion in
Isopropyl Alcohol or Trichloroethylene
Soldering
Bypass capacitor, C-by, should be
General Conditions 260°C max x 10 sec max x 2 times max or
ceramic capacitor ≥ .01 uf
230°C max x 180 sec max x 1 time
Test Circuit
Typical Operation Data
(Vapor phase reflow)
20 to 100 sec up to 215°C, 50 sec
OSCILLOSCOPE
at 215°C, then down to room temperature per 1 to 5°C / sec
PROBE
POWER
SUPPLY
Mechanical Characteristics
Free Drop
Vibration
The specimen shall meet electrical characteristics after tested 3 times,
OSC
Free Drop testing on the hard wooden board from a height of 75 cm.
The specimen shall meet electrical characteristics after tested
by the following conditions: 10-55Hz 1.5mm Amplitude,
55-2000 Hz 20 G's, 2 hours for each plane
FREQ
COUNTER
INPUT FOR E/D
Thermal Shock
Solderability
After applied Thermal Shock of 260°C
max x 10 sec max x 2 times, or 230°C max x 180 sec max,
the specimen shall meet electrical characteristics
Output Waveform
(EIAJ-RCX-0102.101 Condition 1a)
1) Flux: MIL-F-14256 (WW Rosin=25%, Isopropyl Alcohol = 75%)
2) Solder: QQ-S-571 (Sn = 63%, Pb = 37%)
3) Solder bath temperature: 235°C ±5°C
4) Depth of immersion: Up to electrical terminal
5) Immersing time: Within 2 sec ±0.5 sec into solder bath
After performing the above procedures, a newly soldered coverage shall be greater than 90%
SYMMETRY
Pin Connections
1: Tri-State E/D
2: Ground
3: Outp ut
4: VDD
Tape and Reel Dimensions
Ordering Information
HSM91 - 50.00 MHz
CLOCK
SERIES
CENTER
FREQUENCY
Dimensional Tolerance: ±.02" (.508mm)
±.005"(.127mm)
Bulletin
Page
Sm006
2 of 2
Revision
Date
23
Meets EIA-481A and EIAJ-1009B
2,000 PCS/Reel
28 March 2002
Specifications subject to change without notice. All dimensions in inches. © Copyright 1998 The Connor-Winfield Corporation
相关型号：
HSM92-FREQ
HCMOS Output Clock Oscillator, 1MHz Min, 80MHz Max, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE
HSM923-1.544MHZ
XO, Clock, 1.544MHz Min, 170MHz Max, 1.544MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE
HSM923-100.00MHZ
LVCMOS Output Clock Oscillator, 100MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE
©2020 ICPDF网 联系我们和版权申明