HSM935-155.52M [CONNOR-WINFIELD]
HCMOS Output Clock Oscillator;
| 型号： | HSM935-155.52M |
| 厂家： | 
CONNOR-WINFIELD CORPORATION |
| 描述： | HCMOS Output Clock Oscillator 振荡器 |
| 文件： | 总2页 (文件大小：161K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
5.0V Surface Mount
Crystal Clock Oscillator
HSM9
XOi
Features:
The Connor-Winfield models HSM915, HSM925,
HSM935, and HSM945 are 7.5mm x 5mm,
5.0V HCMOS, Surface Mount, Fixed Frequency
Crystal Oscillators (XO) designed for use in
all applications requiring precision clocks. This
oscillator features low stand-by current (10uA)
when the output is disabled. The RoHS compliant,
surface mount package is designed for high-
density mounting and is optimum for mass
production.
2111 Comprehensive Drive
1.8 to 170 MHz
5.0V Operation
RoHS Compliant
Aurora, Illinois 60505
Phone: 630-851-4722
Tri-State Enable / Disable Function
Overall Frequency Tolerance:
HSM945 20 ppm, HSM915 25 ppm,
HSM925 50 ppm, HSM935 100 ppm
Temperature Range: 0 to 70°C
Power Saving Function: 10uA when disabled
Ceramic Surface Mount Package
Tape and Reel Packaging
Fax: 630-851-5040
www.conwin.com
US Headquarters:
630-851-4722
European Headquar-
ters: +353-61-472221
Absolute Maximum Ratings
Parameterꢀ
Storage Temperature
Supply Voltage (Vcc)
Minimumꢀ Nominalꢀ Maximumꢀ
Unitsꢀ
°C
Vdc
Notes
-55
-
-
125
7.0
-0.5
Operating Specifications
Parameterꢀ
Minimumꢀ Nominalꢀ Maximumꢀ
Unitsꢀ
MHz
Notes
Frequency Range (Fo)
1.8
-
125, 155.52
Frequency Tolerance
-
ppm
1
HSM945
-20
-25
-
20
25
HSM915
HSM925
-50
50
HSM935
-100
0
100
70
Operating Temp Range
Supply Voltage (Vdd)
-
°C
Vdc
4.5
5.0
5.5
Supply Current (Icc)
1.544 to 31.999 MHz
32 to 66.999 MHz
67 to 124.999 MHz
125 to 170 MHz
-
-
-
-
-
-
-
-
40
50
80
90
mA
Input Characteristics
Parameterꢀ
Minimumꢀ Nominalꢀ Maximumꢀ
Unitsꢀ
Vdc
Vdc
nS
Notes
Enable Voltage - (Vih)
Disable Voltage - (Vil)
Enable Time
≥ 70% Vdd
-
-
-
-
-
-
≤ 30% Vdd
10
2
-
-
-
-
Disable Time
Output Disable Current (lcc)
150
10
nS
uA
HCMOS Output Characteristics
Parameterꢀ
Minimumꢀ Nominalꢀ Maximumꢀ
Unitsꢀ
pF
Notes
Load
-
-
15
Voltage High (Voh)
4.5
-
-
Vdc
Low (Vol)
-
-
0.55
Current High (loh)
Low (lol)
-2
-
-
-
-
mA
2
Duty Cycle at 50% of Vcc
Rise / Fall Time 10% to 90%
Start-Up Time
45
-
50
-
55
6
%
nS
mS
-
-
10
5
Jitter
-
-
pS RMS
Bulletin
Sm079
1ꢀofꢀ2
Page
Revision
Notes:
02
ꢀ 1.ꢀInclusiveꢀofꢀcalibrationꢀ@ꢀ25°Cꢀ,ꢀfrequencyꢀvsꢀtemperatureꢀstability,ꢀsupplyꢀvoltageꢀchange,ꢀloadꢀchange,ꢀshockꢀandꢀvibration,ꢀ10ꢀyearsꢀaging.
Date
19ꢀDecꢀ2012
ꢀꢀ 2.ꢀOscillatorꢀoutputꢀisꢀenabledꢀwithꢀnoꢀconnectionꢀonꢀpadꢀ1
Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Package Characteristics
Suggested Pad Layout
Package
Hermetically sealed ceramic package and metal cover
Environmental Characteristics
Temperature Cycle The specimen shall meet electrical characteristics after
tested 5 cycles of -55°C / 30 minutes and +125°C / 30 minutes
Hermetical No bubbles appear in Flourinert (FC-43) at 125°C 5°C for 5 minutes
Solvent Resistance
Marking will withstand immersion in
Isopropyl Alcohol or Trichloroethylene
Soldering
Bypass capacitor, C-by, should be
ceramic capacitor ≥ .01 uf
General Conditions 260°C max x 10 sec max x 2 times max or
230°C max x 180 sec max x 1 time
Typical Operation Data
(Vapor phase reflow)
Test Circuit
20 to 100 sec up to 215°C, 50 sec
OSCILLOSCOPE
at 215°C, then down to room temperature per 1 to 5°C / sec
PROBE
POWER
SUPPLY
Mechanical Characteristics
Free Drop
Vibration
The specimen shall meet electrical characteristics after
tested 3 times, Free Drop testing on the hard wooden board
from a height of 75 cm.
OSC
.01uf
FREQ
The specimen shall meet electrical characteristics after tested
by the following conditions: 10-55Hz 1.5mm Amplitude,
55-2000 Hz 20 G's, 2 hours for each plane
COUNTER
INPUT FOR E/D
Thermal Shock
Solderability
After applied Thermal Shock of 260°C
max x 10 sec max x 2 times, or 230°C max x 180 sec max,
the specimen shall meet electrical characteristics
Output Waveform
(EIAJ-RCX-0102.101 Condition 1a)
1) Flux: MIL-F-14256 (WW Rosin=25%, Isopropyl Alcohol = 75%)
2) Solder: QQ-S-571 (Sn = 63%, Pb = 37%)
3) Solder bath temperature: 235°C 5°C
4) Depth of immersion: Up to electrical terminal
5) Immersing time: Within 2 sec 0.5 sec into solder bath
After performing the above procedures, a newly soldered coverage shall be greater than 90%
SYMMETRY
PadꢀConnection
1: Enable/Disable
2: Ground
3: Output
4: Vcc
Tape and Reel Dimensions
Ordering Information
HSM915 - 125.0M
CLOCK
SERIES
CENTER
FREQUENCY
Dimensional Tolerance: ± ±.02 (±5.8mm)
± ±..52 (±107mm)
Bulletin
Page
Sm079
2ꢀofꢀ2
Revision
Date
02
Meets EIA-481A and EIAJ-1009B
2,000 PCS/Reel
19ꢀDecꢀ2012
Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation
相关型号：
HSM94-019.44M
HCMOS Output Clock Oscillator, 19.44MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE
HSM94-034.368M
HCMOS Output Clock Oscillator, 34.368MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE
HSM94-050.0M
HCMOS Output Clock Oscillator, 50MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE
HSM94-FREQ
HCMOS Output Clock Oscillator, 1.8MHz Min, 80MHz Max, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-4
CONNOR-WINFIE
©2020 ICPDF网 联系我们和版权申明