LG324-311.04M [CONNOR-WINFIELD]
LVDS Output Clock Oscillator;型号: | LG324-311.04M |
厂家: | CONNOR-WINFIELD CORPORATION |
描述: | LVDS Output Clock Oscillator |
文件: | 总4页 (文件大小:457K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Surface Mount
Quartz Crystal Oscillator
PG and LG series
Description:
Features:
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
• Frequency Range 10 MHz to 1.5 GHz
• 3.3 or 2.5 Vdc Operation
Connor-Winfield's PGxxx and
LGxxx series are 5x7mm
surface mount, fixed frequency
crystal controlled oscillators
• 5x7 mm SMT Package
• Frequency Stabilities Available:
•
•
20 ppm, 25 ppm, 50 ppm
or 100 ppm
(XO) designed for applications
requiring tight frequency stability, wide
temperature range, and low jitter. Operating
at 2.5 or 3.3Vdc supply voltage, the PGxxx
series provides LVPECL differential outputs,
while the LGxxx provides LVDS differential
outputs. Enable/Disable function is available
on Pad 1 or 2.
www.conwin.com
• Temperature Ranges Available:
•
•
0 to 70°C, -40 to 85°C, 0 to 85°C
or -20 to 70°C
• Low Jitter: 0.6ps RMS Typical
• Differential LVPECL or LVDS outputs
• Tri-State Enable/Disable on Pad 1 or 2
• Tape and Reel Packaging
• RoHS Compliant / Lead Free
Package Outline
Suggested Pad Layout
0.200
(5.08mm)
0.275
(7.0mm)
0.100
(2.54mm)
C
Bypass
Ground
1625
PG123
0.079
(2.00mm)
0.197
(5.0mm)
311.04 MHZ
0.165
(4.20mm)
Top View
1
Ground
Keep
Out
Area
0.069
(1.75mm)
0.070
(1.80mm)
Keep Out Area: Do not route any traces in the keep out area. It is recommended the next layer under the keep out area is to be ground plane.
Pad Connections
Pad Connections
Models: PGxx2, PGxx3, LGxx2, LGxx3
1: Enable / Disable (OE)
2: N/C
Models PGxx4, PGxx5, LGxx4, LGxx5
1: N/C
2: Enable / Disable (OE)
3
Ground:
3
Ground:
4: Output Q
4: Output Q
5: Complementary Output Q
6: Supply Voltage (Vcc)
5: Complementary Output Q
6: Supply Voltage (Vcc)
Ordering Information
PG
3
2
1
-311.04M
Oscillator Type
Temperature
Range
Output
Frequency
Frequency
Tolerance
Supply Voltage
E/D Function
LVPECL
Clock Series
5x7 mm
PG=LVPECL
LG=LVDS
1 = 0 to 70°C
2 = -40 to 85°C
3 = 0 to 85°C
Frequency
Format
-xxx.xM Min.*
-xxx.xxxxxxM Max*
4 = 20 ppm
1 = 25 ppm
2 = 50 ppm
3 = 100 ppm
2 = 2.5 Vdc, E/D Pad 1
3 = 3.3 Vdc, E/D Pad 1
4 = 2.5 Vdc, E/D Pad 2
5 = 3.3 Vdc, E/D Pad 2
4 = -20 to 70°C
*Amount of
numbers after the
decimal point.
M = MHz
Bulletin
Ec279
1 of 4
02
Page
Example Part Numbers:
Revision
Date
PG123-311.04M = 5x7 mm package, 50 ppm, 0 to 70°C, 3.3 Vdc, LVPECL Output, E/D Pad 1, Output Frequency 311.04 MHz
21 June 2016
LG224-622.08M = 5x7 mm package, +/-50ppm, -40 to 85C, 2.5 Vdc, LVDS Output, E/D Pad 2, Output Frequency 622.08 MHz
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Absolute Maximum Ratings
Parameter
Minimum
-55
Nominal
Maximum
125
4.2
Vcc+0.5
Units
°C
Vdc
Vdc
Notes
Notes
Storage Temperature
Supply Voltage (Vcc)
Input Voltage
-
-
-
-0.5
-0.5
Operating Specifications
Parameter
Center Frequency: (Fo)
Minimum
Nominal
Maximum
Units
MHz
10
-
1500
Operating Temperature Range: (See Ordering Information)
Temperature Code 1
Temperature Code 2
Temperature Code 3
0
-40
0
-
-
-
-
70
85
85
70
°C
°C
°C
°C
Temperature Code 4
-20
Total Frequency Tolerance: (See Ordering Information)
Tolerance Code 4
-20.0
-25.0
-50.0
-
-
-
-
20.0
25.0
50.0
ppm
ppm
ppm
ppm
1
1
1
1
Tolerance Code 1
Tolerance Code 2
Tolerance Code 3
Supply Voltage: (Vcc)
-100.0
100.0
Supply Voltage Code 2 or 4
Supply Voltage Code 3 or 5
Supply Current
2.375
3.135
-
-
2.5
3.3
30
-
2.625
3.465
60
Vdc
Vdc
mA
ms
5ꢀ
5ꢀ
Start-Up Time:
10
Jitter / Phase Noise Characteristics
Parameter
Jitter
Minimum
Nominal
Maximum
Units
Notes
Period Jitter
Integrated Phase Jitter
-
-
6
0.6
8
1
ps RMS
ps RMS
SSB Phase Noise for Fo = 312.5 MHz
@ 100 Hz offset
-
-
-
-
-
-
-75
-
-
-
-
-
-
dBC/Hz
dBC/Hz
dBC/Hz
dBC/Hz
dBC/Hz
dBC/Hz
@ 1 KHz offset
@ 10 KHz offset
@ 100 KHz offset
@ 1 MHz offset
-105
-115
-120
-130
-150
@ 10 MHz offset
Input Characteristics
Parameter
Enable / Disable Function Option:
Minimum
Nominal
Maximum
Units
Notes
Models xGxx2, xGxx3 E/D Pad 1, N/C Pad 2
Models xGxx4, xGxx5 E/D Pad 2, N/C Pad 1
Enable Voltage (VIH)
70ꢀ Vcc
-
-
-
-
-
30ꢀ Vcc
200
Vdc
Vdc
ns
Disable Voltage (VIL)
Enable Time
-
-
-
2
Disable Time
50
ns
Enable / Disable Function
Function: (Pad 1 or 2)
Low
High or Open
Output
Disabled (High Impedance)
Enabled
Bulletin
Page
Ec279
2 of 4
02
Revision
Date
21 June 2016
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches.
© Copyright 2016 The Connor-Winfield Corporation Not intended for life support applications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
LVPECL Output Characteristics
Parameter
Minimum
Nominal
Maximum
Units
Notes
Load
-
50
-
Ohms
3
Output Voltage: Vcc = 2.5 Vdc
High (VOH)
1.475
-
-
-
-
V
V
Low (VOL)
0.880
Output Voltage: Vcc = 3.3 Vdc
High (VOH)
2.275
-
-
-
V
V
ꢀ
ps
Low (VOL)
-
45
-
1.680
55
Duty Cycle at 50ꢀ of output voltage swing
Rise / Fall Time: 20ꢀ to 80ꢀ
50
350
500
LVDS Output Characteristics
Parameter
Minimum
Nominal
Maximum
Units
Ohms
mV
Notes
Load
-
100
-
700
50
350
-
Output Differential Voltage (Vod)
Output Swing (Differential Output Pk to Pk)
Duty Cycle at 50ꢀ of output voltage swing
Differential Rise / Fall Time: 20ꢀ to 80ꢀ
250
500
45
450
900
55
4
mV
ꢀ
-
150
ps
Package Characteristics
Package
Hermetically sealed ceramic package and metal cover
Environmental Characteristics
Vibration:
Shock:
Soldering Process;
Vibration per Mil Std 883E Method 2007.3 Test Condition A.
Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.
RoHS compliant lead free. See soldering profile on page 4.
Notes:
1.ꢀ Includesꢀcalibrationꢀ@ꢀ25°C,ꢀfrequencyꢀstabilityꢀvs.ꢀchangeꢀinꢀtemperature,ꢀsupplyꢀvoltageꢀandꢀloadꢀvariations,ꢀshockꢀandꢀvibrationꢀandꢀ20ꢀyearsꢀaging.ꢀ
2.ꢀ Whenꢀtheꢀoscillatorꢀisꢀdisabledꢀtheꢀoutputsꢀgoꢀtoꢀtri-stateꢀlevelꢀ(highꢀimpedance)ꢀwhichꢀfloatsꢀtoꢀVOL.ꢀOutputsꢀareꢀenabledꢀwithꢀnoꢀconnectionꢀonꢀE/Dꢀpad.
3.ꢀ LVPECLꢀoutputsꢀmustꢀbeꢀterminatedꢀintoꢀ50ꢀohmsꢀtoꢀVccꢀ–ꢀ2VꢀorꢀTheveninꢀequivalent.
4.ꢀ Vodꢀisꢀmeasuredꢀwithꢀaꢀ100ꢀohmꢀresistorꢀbetweenꢀtheꢀtrueꢀandꢀtheꢀcomplementaryꢀoutputs.
Phase Noise Plot
Bulletin
Ec279
3 of 4
Page
Revision
02
Date
21 June 2016
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches.
© Copyright 2016 The Connor-Winfield Corporation Not intended for life support applications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
LVDS Test Circuit
LVDS Output Waveform
Vcc
Power
Supply
Duty Cycle
Q
Q
Q
Vod
Vod
Ground
100
Ohm
0.1 uF
10 nF
Differential
Output
80%
20%
Q
Vopp
0V
0V
0V
OE
or
Waveform
peak-to-peak
tf
tr
N/C
LVPECL Test Circuit
LVPECL Output Waveform
Duty Cycle
Q
R3
80%
50%
R4
6
1
5
2
4
3
10 nF
0.1 uF
R1
R2
20%
Q
OE
or
N/C
tr
tf
Vcc
2.5V
3.3V
R1 / R3
250 Ohms
130 Ohms
R2 /R4
62.5Ohms
82 Ohms
Vcc = Vcc2
RoHS Solder Profile
Temperature
260°C
260°C
220°C
180°C
150°C
120°C
0
10 s
Up to 120 s
Typical
60 to 90 s
Typical
Meets IPC/JEDEC J-STD-020C
Tape and Reel Dimensions
Direction of Feed (Customer)
16mm Tape
Revision Revision Date
Note
00
01
02
08/28/12
01/14/15
06/07/16
Data Sheet Release
Bulletin
Page
Ec279
4 of 4
02
Added LDVS Information
Updated period jitter and rise/fall time.
Revision
Date
21 June 2016
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches.
© Copyright 2016 The Connor-Winfield Corporation Not intended for life support applications.
相关型号:
©2020 ICPDF网 联系我们和版权申明