M100F-010.0M [CONNOR-WINFIELD]
OSC TCXO 10.000MHZ LVCMOS SMD;
| 型号： | M100F-010.0M |
| 厂家： | 
CONNOR-WINFIELD CORPORATION |
| 描述： | OSC TCXO 10.000MHZ LVCMOS SMD 石英晶振 温度补偿晶振 |
| 文件： | 总4页 (文件大小：477K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Available at Digi-Key
M100F / V
High Precision
TCXO / VCTCXO
Oscillators
Description:
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
The Connor-Winfield M100, M170,
and M200 models offer precise
frequency stability and excellent
phase noise in a 5x3.2mm
Features:
Models: M100, M170, M200 Series
• Package: 5 x 3.2mm, 8 Pads
• Frequencies Available: 10, 12.288, 12.8,
19.2,19.44, 20.0, 24.576, or 40.0 MHz
package.
www.conwin.com
• 3.3 Vdc Operation
Through the use of analog
temperature compensation, these TCXO's and
VCTCXO's are capable of holding sub 100 ppb and
200ppb stabilities over the commercial or industrial
temperature ranges.
• Output Logic: LVCMOS
• Frequency Stability:
M100: 100 ppb, 0 to 70°C
M170: 100 ppb -20 to 70°C
M200: 200 ppb, -40 to 85°C
• Fixed Frequency - TCXO
• Optional Control Voltage - VCTCXO
• Low Jitter <0.50 ps RMS
• Low Phase Noise
Applications:
Basestation
DSL / ADSL
IP Timing
Communications
Femtocell
LTE
• Tape and Reel Packaging
• RoHS Compliant / Lead Free
Precision GPS
WiMAX / WiBro
SONET / SDH
WLAN
Absolute Maximum Ratings
Parameter
Minimum Nominal
Maximum
Units
°C
Vdc
Vdc
Notes
Storage Temperature
Supply Voltage (Vcc)
Input Voltage (Vc)
-40
-0.5
-0.5
-
-
-
85
4.6
Vcc + 0.5
Ordering Information
M
100
F
- 012.8M
Type / Package
Frequency Stability and
Temperature Range
TCXO or VCTCXO
Output Frequency
TCXO / VCTCXO
Series
F = TCXO
V = VCTCXO
Frequency Format
-xxx.xM Min
-xxx.xxxxxxM Max
*Amount of numbers after
the decimal point.
M = MHz
100 = 100 ppb, 0 to 70°C
170 = 100 ppb, -20 to 70°C
200 = 200 ppb, -40 to 85°C
M = 5.0x3.2 mm
Supply Voltage = 3.3 Vdc
Output Logic = LVCMOS
Example: Part Number
M100F-012.8M = 5x3.2mm package, 100 ppb, 0 to 70°C, 3.3 Vdc, LVCMOS Output, TCXO, 12.8 MHz
M100V-019.2M = 5x3.2mm package, 100 ppb, 0 to 70°C, 3.3 Vdc, LVCMOS Output, VCTCXO, 19.2 MHz
M200F-010.0M = 5x3.2mm package, 200 ppb, -40 to 85°C, 3.3 Vdc, LVCMOS Output, TCXO, 10 MHz
M200V-020.0M = 5x3.2mm package, 200 ppb, -40 to 85°C, 3.3 Vdc, LVCMOS Output, VCTCXO, 20 MHz
Bulletin
Tx382
1 of 4
Page
Revision
04
Date
09 Oct 2019
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Operating Specifications
Parameter
Minimum
Nominal
Maximum
Units
MHz
ppm
Notes
Output Frequency (Fo)
Frequency Calibration @ 25 °C
Frequency Stability
Model M100x and M170x
Model M200x
10.0, 12.288, 12.8, 19.2, 19.44, 20.0, 24.576, 40.0
-1.0 1.0
(See Ordering Information for full part number)
-
1
-100
-200
-0.20
-0.20
-
-1.0
-1.0
-
-
-
-
-
-
-
100
200
0.20
0.20
0.40
1.0
ppb
ppb
ppm
ppm
ppm
ppm
ppm
2
2
5ꢀ
5ꢀ
3
4
5
Frequency vs. Load Stability
Frequency vs. Voltage Stability
Static Temperature Hysteresis
Freq. shift after reflow soldering
Long Term Stability
Aging
1.0
per Life (20 Years)
per Day
per Second
-3.0
-40
-
-
3.0
40
-
ppm
ppb
pps
-
4.63E-13
Operating Temperature Range
Model M100x
(See Ordering Information for full part number)
0
-20
-40
3.135
-
-
-
70
70
85
3.465
3.3
°C
°C
°C
Vdc
mA
Model M170x
Model M200x
-
3.30
-
Supply Voltage (Vcc)
Supply Current (Icc)
Jitter:
Period Jitter
-
-
3.0
0.5
5.0
1.0
ps RMS
ps RMS
Integrated Phase Jitter
SSB Phase Noise for Fo=12.8 MHz
@ 10 Hz offset
6
-
-
-
-
-
-
-90
-
-
-
-
-
-
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
@ 100 Hz offset
@ 1 KHz offset
@ 10 KHz offset
@ 100 KHz offset
@ 1 MHz offset
-120
-140
-153
-154
-154
SSB Phase Noise for Fo=19.2MHz
@ 10 Hz offset
-
-
-
-
-
-
-
-90
-115
-135
-151
-154
-155
-
-
-
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ms
@ 100 Hz offset
@ 1 KHz offset
@ 10 KHz offset
@ 100 KHz offset
@ 1 MHz offset
-
-
-
-
Start-Up Time
10
Control Voltage Input Characteristics
Parameter
Minimum
Nominal
Maximum
Units
V
Notes
Control Voltage
0.3
10
1.65
3.0
-
Frequency Pullability
Control Voltage Slope
Monotonic Linearity
Input Impedance
-
ppm
Positive Slope
-
-
-
-
10
-
-
ꢀ
Ohm
KHz
100K
10
Modulation Bandwidth (3dB)
LVCMOS Output Characteristics
Parameter
Minimum
Nominal
Maximum
Units
pF
Notes
Load (CL)
-
15
-
-
7
Voltage (High) (Voh)
90ꢀVcc
-
10ꢀVcc
55
Vdc
Vdc
ꢀ
(Low)
(Vol)
-
45
-
-
Duty Cycle at 50ꢀ of Vcc
Rise / Fall Time 10ꢀ to 90ꢀ
50
4
8
ns
Bulletin
Page
Revision
Date
Tx382
2 of 4
04
09 Oct 2019
Specifications subject to change without notification. See Connor-Winfield's website for latest revision.
© Copyright 2019 The Connor-Winfield Corporation Not intended for life support applications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Package Characteristics
Hermetically sealed ceramic package with grounded metal cover
Package
Package Terminations: 0.5 to 1.0 um (20 to 40 micro-inches) Gold over minimum of 2.0um (80 micro-inches) Nickel.
Environmental Characteristics
Vibration:
Shock:
Soldering Process:
Vibration per Mil Std 883E Method 2007.3 Test Condition A.
Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.
RoHS compliant lead free. See soldering profile on page 4.
Notes:
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1.ꢀInitialꢀcalibrationꢀ@ꢀ25°C.ꢀ 2°C,ꢀforꢀVCTCXO'sꢀVcꢀ=ꢀ1.65V.ꢀSpecificationsꢀatꢀtimeꢀofꢀshipmentꢀafterꢀ48ꢀhoursꢀofꢀoperation.
2.ꢀFrequencyꢀstabilityꢀvs.ꢀchangeꢀinꢀtemperature.ꢀ[ (Fmax-Fmin)/2.Fo].ꢀForꢀVCTCXO'sꢀ-ꢀVcꢀ-=ꢀ1.65V
3.ꢀFrequencyꢀchangeꢀafterꢀreciprocalꢀtemperatureꢀrampedꢀoverꢀtheꢀoperatingꢀrange.ꢀFrequencyꢀmeasuredꢀbeforeꢀandꢀafterꢀatꢀ25°C
4.ꢀTwoꢀconsecutiveꢀreflowsꢀafterꢀ1ꢀhourꢀrecoveryꢀ@ꢀ25°C.
5.ꢀFrequencyꢀdriftꢀoverꢀ1ꢀyearꢀ@ꢀ25°C.
6.ꢀBWꢀ=ꢀ12ꢀKHzꢀtoꢀFo/2
7.ꢀAttention:ꢀToꢀachieveꢀoptimalꢀfrequencyꢀstability,ꢀandꢀinꢀsomeꢀcasesꢀtoꢀmeetꢀtheꢀspecificationꢀstatedꢀonꢀthisꢀdataꢀsheet,ꢀitꢀisꢀrequiredꢀthatꢀtheꢀ
ꢀ
ꢀ
circuitꢀconnectedꢀtoꢀthisꢀTCXOꢀoutputꢀmustꢀhaveꢀtheꢀequivalentꢀinputꢀcapacitanceꢀthatꢀisꢀspecifiedꢀbyꢀtheꢀnominalꢀloadꢀcapacitance.ꢀDeviationsꢀ
fromꢀtheꢀnominalꢀloadꢀcapacitanceꢀwillꢀhaveꢀaꢀgraduatedꢀeffectꢀonꢀtheꢀstabilityꢀofꢀapproximatelyꢀ20ꢀppbꢀperꢀpFꢀloadꢀdifference.
Suggested Pad Layout
Package Outline for
10.0, 12.8, 19.2, 20.0 MHz
0.065
Marking
Configuration
(all package outlines)
To
Output
0.028
0.028
(1.65mm)
(0.71mm)
0.126
0.083 Max.
(2.1mm)
(0.71mm)
0.006 Typ.
(0.15mm)
(3.2mm)
0.053
(1.35mm)
Keep
Out
Area*
0.042
(1.07mm)
0.016
(0.41mm)
5
4
1
0.197
(5.0mm)
0.050
(1.27mm)
Top
View
0.098
(2.49mm)
0.028
(0.71mm)
External
Bypass
Capacitor
0.1 uF
&
Pad 1
Pad 8
0.042
(1.07mm)
0.008 Typ.
(0.20mm)
Top
8
View
Bottom
View
Dimensional Tolerance:
+/-0.005 (+/-0.127mm)
0.050
(1.27mm)
10 nF
0.050
(1.27mm)
To
Ground
* Do not route any traces in the keep out area. It is
recommended the next layer under the keep out
area is to be ground plane.
Package Outline for
Marking
Configuration
12.288, 19.44, 24.576 MHz
0.065
(1.65mm)
0.028
(0.71mm)
0.006 Typ.
(0.15mm)
0.042
(1.07mm)
0.016
(0.41mm)
Pad Connections
(all package outlines)
0.050
(1.27mm)
0.028
(0.71mm)
1:
VCTCXO: Control Voltage (Vc)
TCXO: N/C
Pad 1
Pad 8
0.042
(1.07mm)
0.008 Typ.
(0.20mm)
Bottom
View
2:
3:
4:
5:
6:
7:
8:
Do Not Connect
Do Not Connect
Ground
Output
Package Outline for
40.0 MHz
Marking
Configuration
Do Not Connect
Do Not Connect
Supply Voltage (Vcc)
0.065
(1.65mm)
0.028
(0.71mm)
0.006 Typ.
(0.15mm)
0.042
(1.07mm)
0.016
(0.41mm)
0.050
(1.27mm)
0.028
(0.71mm)
Pad 1
Pad 8
0.042
(1.07mm)
0.008 Typ.
(0.20mm)
Bottom
View
Bulletin
Tx382
3 of 4
04
Page
Revision
Date
09 Oct 2019
Specifications subject to change without notification. See Connor-Winfield's website for latest revision.
© Copyright 2019 The Connor-Winfield Corporation Not intended for life support applications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Phase Noise Information
Test Circuit
DNC
DNC
Vcc
Supply
Voltage
Output
7
6
5
8
1
10 nF
Bypass
0.1 uF
Bypass
4
15 pF
3
2
TCXO = N/C
VCTCXO = Vc
DNC
DNC
DNC = Do Not Connect
LVCMOS Output Waveform
M100 - M200 Design Recommendations
Vcc, should have
a large copper
area for reduced
inductance.
0.010”(0.254mm)
Recommended
clearance
1V/Div
50 Ohm trace
<1”by design
Vcc
Connect a 0.01uF
bypass capacitor
<0.1”(2.54mm)
from the pad.
inductance
for internal
copper flood.
Solder Profile
Buffer
8
7
6
5
M100F 1145
10.0 MHZ
Temperature
260°C
260°C
Ground
4
1
3
Ground,
should have
2
220°C
180°C
150°C
120°C
Ground
Top View
Top View
a large copper
area for reduced
inductance.
50 Ohm Trace
Without
Vias
OSC
Output
Buffer
TOP LAYER
0
GROUND LAYER
10 s
Up to 120 s
60 to 90 s
Typical
BOTTOM LAYER
Typical
Meets IPC/JEDEC J-STD-020C
Tape and Reel Information
Revision History
Revision
Date
Changes
00
01
02
03
04
10/31/12
09/02/14
03/25/15
12/06/17
10/09/19
Data sheet released
Phase Noise Plot and Specifications Update
Updated Frequencies & Alternate Package
Added 19.44MHz to available frequency list.
Bulletin
Tx382
4 of 4
04
Page
Revision
Date
Added package and marking options, and updated tape and reel.
09 Oct 2019
Specifications subject to change without notification. See Connor-Winfield's website for latest revision.
© Copyright 2019 The Connor-Winfield Corporation Not intended for life support applications.
相关型号：
M100G/1
Rectifier Diode, 1 Element, 1A, 400V V(RRM), Silicon, DO-204AL, PLASTIC, DO-41, 2 PIN
VISHAY
M100G/23
Rectifier Diode, 1 Element, 1A, 400V V(RRM), Silicon, DO-204AL, PLASTIC, DO-41, 2 PIN
VISHAY
M100G/4
Rectifier Diode, 1 Element, 1A, 400V V(RRM), Silicon, DO-204AL, PLASTIC, DO-41, 2 PIN
VISHAY
M100J-E2
Rectifier Diode, 1 Element, 1A, 600V V(RRM), Silicon, DO-204AL, PLASTIC, DO-41, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明