首页 |元器件品牌

M624-052.000M [CONNOR-WINFIELD]

Oscillator,;
M624-052.000M
型号： M624-052.000M
厂家： CONNOR-WINFIELD CORPORATION    CONNOR-WINFIELD CORPORATION
描述：

Oscillator,
文件： 总4页 (文件大小：186K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
Precision Sub-Miniature  
5.0x3.2mm  
TCXO / VCTCXO  
Designed for Telecom Applications  
Description  
Features:  
2111 Comprehensive Drive  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630- 851- 5040  
3.3V Operation  
LVCMOS or Clipped Sinewave Output  
Logic  
Sub-Miniature 5.0x3.2mm SMT Package  
Frequency Stabilities Available:  
0.28ppm with STRATUM 3 Holdover,  
0.50ppm or 1.00ppm  
The Connor-Winfield  
5.0x3.2mm Temperature  
Compensated Crystal  
www.conwin.com  
Oscillators and Voltage Controlled  
Temperature Compensated Crystal  
Oscillators are designed for use in  
applications requiring tight frequency  
stability in a small package. Through  
the use of Analog Temperature  
Compensation, this device is capable  
of holding sub 1-ppm stabilities over  
wide temperature ranges.  
US Headquarters:  
630-851-4722  
European Headquarters:  
+353-61-472221  
Temperature Ranges Available:  
0 to 70°C  
-40 to 85°C  
Low Power <10mA  
Low Jitter <1pS RMS  
Tape and Reel Packaging  
RoHS Compliant / Lead Free  
Recommended for new designs  
Ordering Information  
Applications  
M602 - 012.8M  
STRATUM 3 Applications  
GPS Receivers  
Instrumentation  
Femtocells  
TCXO  
SERIES  
CENTER  
FREQUENCY  
Example Part Number  
FTTH, FTTC  
Pad Connections  
Package Layout  
0.065  
(1.65mm)  
0.028  
(0.71mm)  
Pad Connection  
0.126  
(3.2mm)  
0.083 Max.  
(2.1mm)  
0.006 Typ.  
(0.15mm)  
1
2
3
4
5
6
7
8
Voltage Control or N/C  
0.042  
(1.07mm)  
Do not connect  
Do not connect  
Ground  
0.016  
(0.41mm)  
0.197  
(5.0mm)  
0.050  
(1.27mm)  
Output  
0.028  
(0.71mm)  
Do not connect  
Do not connect  
Supply, Vcc  
Pad 8  
Pad 1  
0.042  
(1.07mm)  
0.008 Typ.  
(0.20mm)  
Top  
View  
Dimensional Tolerance:  
+/-0.005 (+/-0.127mm)  
Bottom  
View  
Ordering Information  
-
012.8M  
M
6
0
2
Type:  
Precision  
TCXO  
VCTCXO  
3.2x5mm  
Output Frequency:  
Frequency Format  
-xxx.xM Min.*  
-xxx.xxxxxxM Max.*  
*Amount of numbers  
after the decimal point.  
M = MHz  
Features:  
2 = TCXO, LVCMOS, 3.3Vdc.  
3 = TCXO, Clipped Sinewave, 3.3Vdc.  
4 = VCTCXO, LVCMOS, 3.3Vdc.  
5= VCTCXO, Clipped Sinewave, 3.3Vdc.  
Temperature Range:  
5 = 0 to 70° C  
6 = -40 to 85° C  
Frequency Stability:  
0 = ± 0.28 ppm  
1 = ± 0.50 ppm  
2 = ± 1.00 ppm  
Example:  
M602-012.8M = 3.2x5mm, TCXO, LVCMOS,  
3.3Vdc, -40 to 85C, +/-0.28ppm, Output Frequency 12.8MHz  
Bulletin  
Tx214  
To order an M602 with an output frequency of:  
6.4 MHz = M602-006.4M  
20 MHz = M602-020.0M  
Page  
1 of 4  
01  
38.88 MHz = M602-038.88M  
Revision  
Date  
Consult the factory for available frequencies.  
05 Sep 2008  
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation  
2111 Comprehensive Drive  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630-851-5040  
www.conwin.com  
Model Specifications  
Model Number  
Output Type  
M502  
LVCMOS  
TCXO  
M503  
Clipped Sinewave  
TCXO  
M504  
LVCMOS  
VCTCXO  
M505  
Clipped Sinewave  
VCTCXO  
Notes  
Features  
TCXO / VCTCXO  
Frequency Range  
Frequency Stability  
Supply Voltage  
6.4 to 40 MHz  
± 0.28ppm  
3.3Vdc  
1
3.3V Operation  
LVCMOS or Clipped Sinewave Output  
Logic  
Temperature Range  
Holdover Stability  
0 to 70°C  
± 0.32ppm  
2
Sub-Miniature 3.2x5.0mm SMT Package  
Frequency Stabilities Available:  
0.28ppm with STRATUM 3 Holdover,  
0.50ppm or 1.00ppm  
Temperature Ranges Available:  
0 to 70°C  
-40 to 85°C  
Model Number  
Output Type  
M602  
LVCMOS  
TCXO  
M603  
Clipped Sinewave  
TCXO  
M604  
LVCMOS  
VCTCXO  
M605  
Clipped Sinewave  
VCTCXO  
Notes  
TCXO / VCTCXO  
Frequency Range  
Frequency Stability  
Supply Voltage  
6.4 to 40 MHz  
± 0.28ppm  
3.3Vdc  
1
2
Temperature Range  
Holdover Stability  
-40 to 85°C  
± 0.32ppm  
Low Power <10mA  
Low Jitter <1pS RMS  
Tape and Reel Packaging  
RoHS Compliant / Lead Free  
Recommended for new designs  
Model Number  
Output Type  
M512  
LVCMOS  
TCXO  
M513  
Clipped Sinewave  
TCXO  
M514  
LVCMOS  
VCTCXO  
M515  
Clipped Sinewave  
VCTCXO  
Notes  
TCXO / VCTCXO  
Frequency Range  
Frequency Stability  
Supply Voltage  
6.4 to 40 MHz  
± 0.50ppm  
3.3Vdc  
0 to 70°C  
1
Notes  
1
LVCMOS Test Circuit  
DNC  
Temperature Range  
DNC  
Model Number  
Output Type  
M612  
LVCMOS  
TCXO  
M613  
Clipped Sinewave  
TCXO  
M614  
LVCMOS  
VCTCXO  
M615  
Clipped Sinewave  
VCTCXO  
Output  
15 pF*  
Vcc  
Supply  
Voltage  
7
6
5
8
1
TCXO / VCTCXO  
Frequency Range  
Frequency Stability  
Supply Voltage  
6.4 to 40 MHz  
.01 uF  
Bypass  
4
3
2
± 0.50ppm  
3.3Vdc  
-40 to 85°C  
N/C - TCXO  
VC - VCTCXO  
Temperature Range  
DNC  
DNC  
DNC = Do Not Connect  
* NPO Grade Component  
Model Number  
Output Type  
M522  
LVCMOS  
TCXO  
M523  
Clipped Sinewave  
TCXO  
M524  
LVCMOS  
VCTCXO  
M525  
Clipped Sinewave  
VCTCXO  
Notes  
Clipped Sinewave Test Circuit  
TCXO / VCTCXO  
Frequency Range  
Frequency Stability  
Supply Voltage  
6.4 to 52 MHz  
DNC  
DNC  
± 1.00ppm  
3.3Vdc  
0 to 70°C  
1
Notes  
1
AC Coupling  
Capacitor  
Output  
10 pF*  
Vcc  
Supply  
Voltage  
Temperature Range  
7
6
5
8
1
10Kohm  
Model Number  
Output Type  
M622  
LVCMOS  
TCXO  
M623  
Clipped Sinewave  
TCXO  
M624  
LVCMOS  
VCTCXO  
M625  
Clipped Sinewave  
VCTCXO  
.01 uF  
Bypass  
4
3
2
N/C - TCXO  
VC - VCTCXO  
TCXO / VCTCXO  
Frequency Range  
Frequency Stability  
Supply Voltage  
6.4 to 52 MHz  
DNC  
DNC  
± 1.00ppm  
3.3Vdc  
-40 to 85°C  
DNC = Do Not Connect  
* NPO Grade Component  
Temperature Range  
Notes:  
1) Frequency stability vs. change in temperature. [± ±Fmax – Fmin)/2.Fo].  
2) Inclusive of frequency stability, supply voltage change ±± 1%), aging, for 24 hours.  
US Headquarters:  
630-851-4722  
European Headquarters:  
+353-61-472221  
Bulletin  
Page  
Tx214  
2 of 4  
01  
Revision  
Date  
05 Sep 2008  
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation  
2111 Comprehensive Drive  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630-851-5040  
www.conwin.com  
Electrical Specifications for all Models  
ABSOLUTE MAXIMUM RATINGS  
PARAMETER  
UNITS MINIMUM NOMINAL MAXIMUM  
UNITS  
°C  
NOTE  
Storage Temperature  
Supply Voltage  
Input Voltage  
-55  
-0.5  
-0.5  
-
-
-
85  
6.0  
Features  
±Vcc)  
±Vc)  
Vdc  
Vdc  
Vcc+0.5  
3.3V Operation  
LVCMOS or Clipped Sinewave Output  
Logic  
Sub-Miniature 3.2x5.0mm SMT Package  
Frequency Stabilities Available:  
0.28ppm with STRATUM 3 Holdover,  
0.50ppm or 1.00ppm  
Temperature Ranges Available:  
0 to 70°C  
-40 to 85°C  
Low Power <10mA  
Low Jitter <1pS RMS  
Operating Specifications  
Parameter  
Minimum  
Nominal  
Maximum  
1.00  
0.2  
Units  
ppm  
Notes  
TCXO Frequency Calibration @ 25 C  
Supply Voltage Variation. ±Vcc± 5%)  
Load Coefficient, ± 5%  
-1.00  
-
-
1
-0.2  
ppm  
-0.2  
-
0.2  
ppm  
Static Temperature Hysteresis  
Total Frequency Tolerance  
Supply Voltage  
-0.4  
-
0.4  
ppm  
2
3
4
-4.60  
-
4.60  
3.465  
10  
ppm  
±Vcc)  
±Icc)  
3.135  
3.3  
6
Vdc  
Supply Current  
-
-
-
-
-
-
-
-
-
mA  
Period Jitter  
3
5
ps rms  
ps rms  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
ms  
Integrated Phase Jitter (BW=12kHz to 20MHz)  
SSB Phase Noise at 10Hz offset  
SSB Phase Noise at 100Hz offset  
SSB Phase Noise at 1KHz offset  
SSB Phase Noise at >10KHz offset  
SSB Phase Noise at >100KHz offset  
Start Up Time  
0.3  
-80  
-110  
-135  
-150  
-150  
-
1.0  
Tape and Reel Packaging  
RoHS Compliant / Lead Free  
Recommended for new designs  
-70  
-100  
-130  
-145  
-150  
10  
LVCMOS Test Circuit  
DNC  
Input Characteristics For Voltage Control (Pad 1)  
DNC  
Parameter  
Minimum  
0.3  
Nominal  
Maximum  
Units  
Vdc  
ppm  
%
Notes  
Control Voltage Range ±Vcc = 3.3V)  
±Vc)  
1.65  
3.0  
Output  
15 pF*  
Vcc  
Supply  
Voltage  
7
6
5
8
1
Frequency Tuning  
Linearity  
± 10  
-
-
-
-
5
± 5  
.01 uF  
Bypass  
4
3
2
Slope  
Positive  
N/C - TCXO  
VC - VCTCXO  
LVCMOS Output Characteristics  
DNC  
DNC  
Parameter  
Minimum  
Nominal  
Maximum  
Units  
pF  
Notes  
LOAD  
-
15  
-
6
DNC = Do Not Connect  
* NPO Grade Component  
Voltage  
±High)  
±Low)  
±High)  
±Low)  
±Voh)  
±Vol)  
±Ioh)  
±Iol)  
90%Vcc  
-
-
-
Vdc  
Vdc  
mA  
mA  
%
-
-4  
-
10%Vcc  
Current  
-
-
4
Clipped Sinewave Test Circuit  
-
DNC  
DNC  
Duty Cycle at 50% of Vcc  
45  
-
50  
-
55  
8
Rise / Fall Time 10% to 90%  
ns  
AC Coupling  
Capacitor  
Output  
10 pF*  
Vcc  
Supply  
Voltage  
7
6
5
8
1
Clipped Sinewave Output Characteristics  
10Kohm  
Parameter  
Minimum  
Nominal  
Maximum  
Units  
Notes  
.01 uF  
Bypass  
4
Load  
-
-
10K  
10  
-
-
-
-
-
7
8
8
3
2
N/C - TCXO  
VC - VCTCXO  
Output Load Resistance  
Output Load Capacitance  
Output Voltage  
-
-
Ohms  
pF  
DNC  
DNC  
1.00  
V pk-pk  
DNC = Do Not Connect  
* NPO Grade Component  
Notes  
1)  
2)  
3)  
TCXO: Initial calibration @ 25 C. Specifications at time of shipment after 48 hours of operation.  
Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25°C.  
Inclusive of calibration @ 25 C, frequency vs. change in temperature, change in supply voltage ±± 5%), load change ±± 5%), reflow  
soldering process and 20 years aging.  
US Headquarters:  
630-851-4722  
4)  
For best in application performance, careful selection of an external power source is critical. Select an external regulator that meets or  
xceeds to following specifications regarding voltage regulation tolerance, initial accuracy, temperature coefficient, voltage noise, and  
low voltage noise density.  
Density = 50nV/±Square root Hz), Temperature Coefficient < 5ppm°C.  
Additional pull ranges are available; please contact the factory for additional information.  
For best performance it is recommended that the device connected to this output should have an equivalent input capacitance of  
Factory Test Conditions: Initial Accuracy ± 2mv, Noise ±0.1Hz to 10 KHz) 15uV p-p, Voltage Noise  
European Headquarters:  
+353-61-472221  
5)  
6)  
15pF.  
Output is DC coupled.  
7)  
8)  
Bulletin  
Page  
Tx214  
For best performance it is recommended that the device connected to this output should have an equivalent input capacitance of  
10pF.  
3 of 4  
01  
Revision  
Date  
05 Sep 2008  
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation  
2111 Comprehensive Drive  
Aurora, Illinois 60505  
Phone: 630-851-4722  
Fax: 630-851-5040  
www.conwin.com  
Environmental Characteristics  
Vibration:  
Shock:  
Soldering:  
Vibration per Mil Std 883E Method 2007.3 Test Condition A  
Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.  
SMD product suitable for Convection Reflow soldering. Peak temperature  
260 C. Maximum time above 220 C, 60 seconds.  
Suggested Pad Layout  
To  
CMOS  
Output  
Solderability  
Solderability per Mil Std 883E Method 2003  
To  
Output  
0.028  
(0.71mm)  
External AC  
Typical Phase Noise  
Coupling Capacitor  
Used For Clipped  
Sinwave Output  
Model M602-012.8MHz  
0.053  
(1.35mm)  
5
4
Top  
View  
0.098  
(2.49mm)  
Keep Out Area*  
External  
Bypass  
1
8
Capacitor  
0.01 uF  
0.050  
(1.27mm)  
0.050  
(1.27mm)  
To  
Ground  
Dimensional Tolerance:  
+/-0.005 (+/-0.127mm)  
* Do not route any traces in the keep out area.  
It is recommended the next layer under the  
keep out area is to be ground plane.  
Solder Profile  
Temperature  
260°C  
260°C  
Tape and Reel Specifications  
220°C  
180°C  
150°C  
120°C  
0
Time  
120 S  
Max.  
10 S  
60 S  
Max.  
360 Sec. Max.  
Clipped Sinewave  
Output Waveform  
LVCMOS  
Output Waveform  
90%  
50%  
10%  
US Headquarters:  
630-851-4722  
European Headquarters:  
+353-61-472221  
Bulletin  
Page  
Tx214  
4 of 4  
10ns 200mV  
Revision  
Date  
01  
05 Sep 2008  
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation  

相关型号：

M624-052.0M

 CMOS Output Clock Oscillator, 6.4MHz Min, 52MHz Max, 52MHz Nom, ROHS COMPLIANT, MINIATURE PACKAGE-8
CONNOR-WINFIE

M624-500.0000

 Oscillator
IDT

M624-622.0800

 Oscillator
IDT

M624-625.0000

 Oscillator
IDT

M624-FREQ

 CMOS Output Clock Oscillator, 6.4MHz Min, 52MHz Max, ROHS COMPLIANT, MINIATURE PACKAGE-8
CONNOR-WINFIE

M624016-10E1

 16KX4 STANDARD SRAM, 10ns, PDSO24, 0.300 INCH, PLASTIC, SOJ-24
STMICROELECTR

M624016-10PS1

 IC,SRAM,16KX4,CMOS,DIP,22PIN,PLASTIC
STMICROELECTR

M624016-12E1

 16KX4 STANDARD SRAM, 12ns, PDSO24, 0.300 INCH, PLASTIC, SOJ-24
STMICROELECTR

M624016-12PS1

 IC,SRAM,16KX4,CMOS,DIP,22PIN,PLASTIC
STMICROELECTR

M624016-15E1

 16KX4 STANDARD SRAM, 15ns, PDSO24, 0.300 INCH, PLASTIC, SOJ-24
STMICROELECTR

M624016-15PS1

 IC,SRAM,16KX4,CMOS,DIP,22PIN,PLASTIC
STMICROELECTR

M624016-20E1

 IC,SRAM,16KX4,CMOS,SOJ,24PIN,PLASTIC
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明