OH200-85005SF-FREQ1 [CONNOR-WINFIELD]
Sine Output Oscillator, 5MHz Min, 20MHz Max, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-5;型号: | OH200-85005SF-FREQ1 |
厂家: | CONNOR-WINFIELD CORPORATION |
描述: | Sine Output Oscillator, 5MHz Min, 20MHz Max, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-5 机械 振荡器 |
文件: | 总4页 (文件大小:371K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Stratum 3E High Stability
Oven Stabilized Oscillator
OH200-Series
OCXO – OCVCXO
Description
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
Connor-Winfield’s high stability OH200-
series are exceptionally precise frequency
standards, excellent for use in cellular base
stations, test equipment, Synchronous
Ethernet, VSAT and Stratum 3E applications
These unique OCXO and OCVCXO
O
H
200
12.8 -61
003C
1234567890
MHz
1
232
www.conwin.com
F
1
2
products provide temperature stabilities
in the range of ±3 ppb to ±25 ppb, over
the commercial, extended commercial or
the industrial temperature range. Power
requirements are 3W over the commercial
temperature range and 4.5W over the
industrial temperature range. Additionally,
excellent aging is achieved through the use
of overtone SC cut crystals.
Features
• Frequency Range: 5.0 to 40.0 MHz
• OCXO - Fixed Frequency
The OH200 series is available with
• OCVCXO - Voltage Controlled Frequency
• 3.3 Vdc, 5.0 Vdc or 12.0 Vdc Operation
• Available Frequency Stabilities:
±3 ppb, ±5 ppb, ±10 ppb or ±25 ppb
• Available Temperature Ranges:
0 to 70°C, -20 to 70°C, -40 to 70°C or
-40 to 85°C
• Low Phase Noise / Phase Jitter
• Available Outputs:
CMOS logic or Sinewave output along
with Electronic Frequency Tuning. These
oscillators provide outstanding phase
noise that varies depending on frequency.
Frequencies are available from 5.0 to 40.0
MHz. Allan Variance specifications are rated
for primary reference standards. Warm up
times are on the order of 5 minutes to 0.10
ppm of final frequency.
CMOS or Sinewave
• Package: 1.1" x 1.4" x 0.5" (CO-8)
• RoHS Compliant / Lead Free
Ordering Information
-
OH200
6
10
03
C
F
- 012.8M
Output Frequency
Package
Temperature
Range
Frequency
Stability
Supply Voltage Output Type
OCXO Type
Frequency Format
-xxx.xM Min
OH200- = 1.1x1.4 CO8
06 = ±± ppb
10 = ±5 ppb
20 = ±10 ppb
50 = ±25 ppb
0± = ±.± Vdc
05 = 5.0 Vdc
12 = 12.0 Vdc
C = CMOS
S = Sinewave
F = Fixed
Freq.
V = Voltage
5 = 0 to 70°C
-xxx.xxxxxxM Max
*Amount of
6 = -40 to 85°C
7 = -20 to 70°C
8 = -40 to 70°C
Controlled numbers after the
Freq.
decimal point.
M = MHz
{±ꢀFmax-Fminꢁ)2.Foꢂ
Example Part Number:
ꢀ OH200-61003CF-012.8Mꢀ=ꢀ1.1"ꢀxꢀ1.4"ꢀxꢀ0.5"ꢀCO-8ꢀpackage,ꢀ-40ꢀtoꢀ85°Cꢀtemperatureꢀrange,ꢀ±5.0ꢀppbꢀfrequencyꢀstability,ꢀ3.3ꢀVdcꢀsupplyꢀꢀ
ꢀ
ꢀ
ꢀ voltage,ꢀCMOSꢀsquareꢀwaveꢀoutput,ꢀfixedꢀfrequencyꢀOCXO,ꢀ12.8ꢀMHzꢀoutputꢀfrequency.
ꢀ ToꢀorderꢀaꢀOH200-61003CFꢀwithꢀanꢀoutputꢀfrequencyꢀof:ꢀ6.4ꢀMHzꢀ=ꢀOH200-61003CF-006.4M
ꢀ ToꢀorderꢀaꢀOH200-61003CFꢀwithꢀanꢀoutputꢀfrequencyꢀofꢀ16.384ꢀMHzꢀ=ꢀOH200-61003CF-016.384M.
Bulletin
Cx193
1 of 4
ꢀ OH200-712005SV-040.0Mꢀ=ꢀ1.1"ꢀxꢀ1.4"ꢀxꢀ0.5"ꢀCO-8ꢀpackage,ꢀ-20ꢀtoꢀ70°Cꢀtemperatureꢀrange,ꢀ±10.0ꢀppbꢀfrequencyꢀstability,ꢀ5.0ꢀVdcꢀsupplyꢀꢀ
ꢀ voltage,ꢀSinewaveꢀoutput,ꢀvoltageꢀcontrolledꢀoutputꢀfrequencyꢀOCVCXO,ꢀ40ꢀMHzꢀoutputꢀfrequency.
Page
Revision
Date
09
16 Aug 2012
Specifications subject to change without notice. All dimensions in inches. © Copyright 2010 The Connor-Winfield Corporation
ꢀ 1.
ꢀ 2.
Frequencyꢀstabilityꢀvs.ꢀchangeꢀinꢀtemperatureꢀ[±(Fmax-Fmin)/2.Fo].
Atꢀtimeꢀofꢀshipmentꢀafterꢀ48ꢀhoursꢀofꢀoperation.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Absolute Maximum Ratings
Parameter
Minimum
-55
Nominal
Maximum
125
Units
°C
Vdc
Vdc
Vdc
Vdc
Notes
Notes
Storage Temperature
-
-
-
-
-
Supply Voltage - ±.± Vdc ꢀVccꢁ
Supply Voltage - 5.0 Vdc ꢀVccꢁ
Supply Voltage - 12 Vdc ꢀVccꢁ
Control Voltage ꢀVcꢁ
-0.5
-0.5
-0.5
-0.5
4.5
7.0
1±.5
7.0
Operating Specifications
Parameter
Minimum
Nominal
Maximum
Units
MHz
Center Frequency: ꢀFoꢁ
Operating Temperature Range:
Temperature Code 5
Temperature Code 6
Temperature Code 7
Temperature Code 8
Frequency Calibration:
Frequency Stability vs. Change in Temperature:
Stability Code 06
5.0
-
40.0
0
-
-
-
-
-
70
85
70
70
0.1
°C
°C
-40
-20
-40
-0.1
°C
°C
ppm
@ 25°C
-±.0
-5.0
-
-
-
-
-
-
±.0
5.0
ppb
ppb
ppb
ppb
ppb
ppb
1
1
Stability Code 10
Stability Code 20
-10.0
-25.0
-5.0
10.0
25.0
5.0
1
Stability Code 50
1
Frequency Stability vs Load
Frequency Stability vs Voltage
Aging: Daily:
±5ꢃ
±5ꢃ
-5.0
5.0
5 MHz to 20 MHz
-1.0
-2.0
-
-
1.0
2.0
ppb)day
ppb)day
2
2
>20 MHz to 40 MHz
Aging: First Year:
5 MHz to 20 MHz
-50
-100
-
-
50
100
ppb
ppb
>20 MHz to 40 MHz
Lifetime Tolerance: ꢀ20 Yearsꢁ
5 MHz to 20 MHz-
-±00
-500
-
-
±00
500
ppb
ppb
±
±
>20 MHz to 40 MHz
Supply Voltage: ꢀVccꢁ ꢀNote: Power supply turn-on ramp time must be > 5 ms to 90ꢃ of Vcc.ꢁ
Voltage Code 0±
Voltage Code 05
Voltage Code 12
±.1±
4.75
11.40
±.±0
5.00
12.00
±.47
5.25
12.60
Vdc
Vdc
Vdc
Power Consumption: Turn-On
0 to 70°C Models
-
-
-
-
-
-
-
-
±.00
±.20
±.±0
±.80
W
W
W
W
4
4
4
4
-20 to 70°C Models
-20 to 75°C Models
-40 to 85°C Models
Power Consumption: Steady State @ 25°C
0 to 70°C Models
-
-
-
-
-
-
-
-
1.10
1.10
1.20
1.50
W
W
W
W
4
4
4
4
-20 to 70°C Models
-20 to 75°C Models
-40 to 85°C Models
Phase Jitter: ꢀBW: 10 Hz to Fo)2ꢁ
Models with Fo: 5 MHz to 20 MHz
Models with Fo: >20 MHz to 40 MHz
Short Term Allan Deviation ꢀ1sꢁ
Start-Up Time:
-
-
-
-
-
-
1.0
2.0
-
500
5
ps RMS
ps RMS
RMS
-
1.0E-11
-
-
ms
Warm Up Time @ 25°C:
minutes
5
Notes:
Bulletin
Page
Cx193
2 of 4
09
ꢀ 3.ꢀInclusiveꢀofꢀcalibration,ꢀoperatingꢀtemperature,ꢀsupplyꢀvoltageꢀchange,ꢀloadꢀchangeꢀandꢀ20ꢀyearsꢀaging.
ꢀ 4.ꢀMeasuredꢀwithꢀVccꢀ=ꢀNominal,ꢀinꢀcalmꢀair.
ꢀ 5.ꢀMeasuredꢀ@ꢀ25°C,ꢀwithinꢀ5ꢀminutes,ꢀreferencedꢀoneꢀhourꢀafterꢀturn-on.
Revision
Date
16 Aug 2012
Specifications subject to change without notice. All dimensions in inches. © Copyright 2010 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Phase Noise Characteristics
Typical Phase Noise for OXCO's with CMOS Output
SSB Phase Noise
@1Hz offset
@ 10Hz offset
@ 100Hz offset
@ 1KHz offset
@ 10KHz offset
@ 100KHz offset
5 - 12 MHz 12.1- 20 MHz
20.1 - 30 MHz
30.1 - 40 MHz
Units
-85
-80
-70
-65
-95
-120
-140
-150
-150
dBc)Hz
dBc)Hz
dBc)Hz
dBc)Hz
dBc)Hz
dBc)Hz
-115
-140
-145
-150
-150
-110
-1±5
-140
-150
-150
-100
-125
-140
-150
-150
OCVCXO Input Characteristics (OCXO Type Code V)
Parameter
Control Voltage Range:
Minimum
Nominal
Maximum
Units
Notes
±.± Vdc Models
5.0 Vdc Models
12.0 Vdc Models
0.±0
0.50
0.50
1.65
2.50
2.50
±.00
4.50
4.50
V
V
V
Vcc = ±.± Vdc
Vcc = 5.0 Vdc
Vcc = 12.0 Vdc
Frequency Pullability:
Models with Fo 5 to 20 MHz
Models with Fo >20 to 40 MHz
Input Impedance
±0.4
±0.6
100K
-
-
-
-
-
-
ppm
ppm
Ohms
CMOS Output Characteristics (Output Code C)
Parameter
Minimum
Nominal
Maximum
Units
pF
Notes
Load
-
15
-
Output Voltage:
±.± Vdc Models High ꢀVohꢁ
±.0
-
4.7
-
4.7
-
45
-
-
-
-
-
-
-
50
-
-
-
V
V
V
Low ꢀVolꢁ
0.4
-
5.0 Vdc Models High ꢀVohꢁ
Low ꢀVolꢁ
0.4
-
0.4
55
6
12.0 Vdc Models High ꢀVohꢁ
Low ꢀVolꢁ
Duty Cycle at 50ꢃ of Vcc
Rise ) Fall Time: 10ꢃ to 90ꢃ
Spurious Output
ꢃ
ns
dBc
-
-80
Sinewave Output Characteristics (Output Code S)
Parameter
Load
Output Power
Harmonics
Spurious
Minimum
Nominal
Maximum
Units
Ohms
dBm:
dBc
Notes
-
5.0
-
50
-
-
-
-
-
-±0
-80
-
dBc
Package Characteristics
OH200 Package
Hermetically sealed, resistive welded package with grounded case.
Environmental Characteristics
Shock
500 G’s 1ms, Halfsine, ± shocks per direction, per MIL-STD 202G, Method 21±B Test Condition D.
0.06” D.A. or 10G’s Peak, 10 to 500 Hz, per MIL-STD-202G, Method 204D, Test Condition A.
5.±5 G’s rms. 20 to 2000 Hz per MIL-STD-202G, Method 214,Test Condition 1A, 15 minutes each axis.
10 cycles, 95ꢃ RH, Per MIL-STD-202G, Method 112.
Sinusoidal Vibration
Random Vibration
Moisture
Marking Permanency
Attachment Method PCB
Resistance to Solder Heat
Solder Process
Per MIL-STD-202G, Method 215J.
Through Hole Mounted
Per MIL-STD-202G, Method 210, Condition E.
RoHS compliant, lead free. See solder profile.
Bulletin
Cx193
3 of 4
Page
Revision
09
Date
16 Aug 2012
Specifications subject to change without notice. All dimensions in inches. © Copyright 2010 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Re stabilization Time
Off Time
<1 Hour
Re stabilization Time
<2 Hours *
<6 Hour
<12 Hours *
<48 Hours *
48 Hours + 1)4 Off Time *
<6 Days *
<24 Hour
1 to 16 Days
>16 Days
* For a given off time, the time required to meet daily aging, short term stability and TEV requirements.
Package Outline
Package Marking
0.500
12.70mm
Max.
0.035 Dia.
0.88mm Dia.
0.025
0.635mm
0.244
6.2mm
1232
Date Code (YYWW)
1.417
OH200-61003CF
12.8 MHz
Model Number
Output Frequency
Serial # Barcode
Serial Number
36mm
123456789012
123456789012
5
1
2
1.063
27mm
0.700
Bottom View
4
0.350
8.9mm
17.78mm
Pin 1
3
0.700
17.78mm
1.000
25.4mm
Keep Out Area: Under the OCXO is a keep out area, do not place any parts in this area.
Test Circuit
Pin Connections
Output
Vcc
Pin Connection
1: Control Voltage or N/C
2: N/C
Vcc
10 uF
to
100 uF
N/C
0.01 uF
15 pF
Total Output Load
3: Supply Voltage (Vcc)
4: Output
N/C
or
Ground
Control
Voltage
5: Ground (Case)
Solder Profile
CMOS Output Waveform
Temperature
260°C
260°C
90%
50%
10%
220°C
180°C
150°C
120°C
0
10 s
Up to 120 s
Typical
60 to 90 s
Typical
Bulletin
Page
Cx193
4 of 4
Meets IPC/JEDEC J-STD-020C
Revision
Date
09
16 Aug 2012
Specifications subject to change without notice. All dimensions in inches. © Copyright 2010 The Connor-Winfield Corporation
相关型号:
©2020 ICPDF网 联系我们和版权申明