OH300-51003CV-040.0M [CONNOR-WINFIELD]
CMOS Output Clock Oscillator, 40MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-7;型号: | OH300-51003CV-040.0M |
厂家: | CONNOR-WINFIELD CORPORATION |
描述: | CMOS Output Clock Oscillator, 40MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-7 |
文件: | 总6页 (文件大小:689K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Available at Digi-Key**
www.digikey.com
STRATUM 3E High Stability
Oven Stabilized Oscillator
OH300 Series
OCXO / VCOCXO
Description
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
Connor-Winfield’s high stability OH300
series are exceptionally precise frequency
standards, excellent for use in cellular base
stations, test equipment, Synchronous
Ethernet, VSAT and STRATUM 3E
O
H
3
00-6
1238
38.88 MHz
012345689012
10
0
3C
F
www.conwin.com
012345689012
US Headquarters:
630-851-4722
applications
These unique OCXO / VCOCXO
European Headquarters:
+353-61-472221
Oscillators provide frequency stabilities
in the range of ±± ppb to ±±0 ppb, over
the commercial, extended commercial or
the industrial temperature range. Power
requirements are 1.1W over the commercial
temperature range and 1.±W over the
industrial temperature range after warm-up.
Additionally, excellent aging is achieved
through the use of overtone SC cut crystals.
The OH300 series is available with CMOS
logic or Sinewave output along with Voltage
Controlled option. These oscillators provide
outstanding phase noise that varies depending
on frequency requirements. Allan Variance
specifications are rated for primary reference
standards. Warm up times are on the order of
± minutes to 0.10 ppm of final frequency.
Features
• Frequency Range: ± to 40 MHz
• OCXO - Fixed Frequency
• VCOCXO - Voltage Controlled Option
• 3.3 Vdc or ±.0 Vdc Operation
• Available Frequency Stabilities:
±±.0 ppb, ±10.0 ppb, ±20 ppb or ±±0 ppb
• Available Temperature Ranges:
0 to 70°C, -20 to 70°C, -20 to 7±°C,
-40 to 70°C or -40 to 8±°C
• Low Phase Noise / Phase Jitter
• Output: CMOS Logic or Sinewave
• SMT Package: 22 mm x 2± mm x 12.7 mm
• Tape and Reel Packaging
• RoHS Compliant / Lead Free
** Not all options
available at
Digi-Key
Ordering Information
-
6
OH300
10
03
C
F
- 038.88M
Output Frequency
Package
Temperature
Range
Frequency Stability Supply Voltage
Output Type
OCXO Type
Frequency Format
-xxxꢀxM Min*
-xxxꢀxxxxxxM Max*
*Min of 1 and Max
of 6 digits after
the decimal pointꢀ
M=MHz
OH300- = 22x25mm
Surface Mount
Package
05 = 5ꢀ0 ppb*
10 = 10ꢀ0 ppb
20 = 20ꢀ0 ppb
50 = 50ꢀ0 ppb
03 = 3ꢀ3 Vdc
05 = 5ꢀ0 Vdc
C = CMOS
S = Sinewave
F = Fixed
Freqꢀ
V = Voltage
Controlled
Optionꢀ
5 = 0 to 70°C
6 = -40 to 85°C
7 = -20 to 70°C
8 = -40 to 70°C
9 = -20 to 75°C
*
5.0ꢀppbꢀstabilityꢀmodelsꢀareꢀ
onlyꢀavailableꢀoverꢀtemperatureꢀ
rangesꢀ0ꢀtoꢀ70°Cꢀandꢀ-20ꢀtoꢀ70°C.
Example Part Number:
ꢀ OH300-61003CF-038.88Mꢀ=ꢀꢀ22x25x12.7mmꢀSMTꢀpackage,ꢀ-40ꢀtoꢀ85°Cꢀtemperatureꢀrange,ꢀ 10.0ꢀppbꢀfrequencyꢀstability,ꢀ3.3ꢀVdcꢀsupplyꢀꢀ
ꢀ
ꢀ
ꢀ
ꢀ voltage,ꢀCMOSꢀsquareꢀwaveꢀoutput,ꢀfixedꢀoutputꢀfrequencyꢀOCXO,ꢀ38.88ꢀMHzꢀoutputꢀfrequency.
ꢀ OH300-52005CV-010.0Mꢀ=ꢀ22x25x12.7mmꢀSMTꢀpackage,ꢀ0ꢀtoꢀ70°Cꢀtemperatureꢀrange,ꢀ 20.0ꢀppbꢀfrequencyꢀstability,ꢀ5.0ꢀVdcꢀsupplyꢀꢀ ꢀ
ꢀ voltage,ꢀCMOSꢀsquareꢀwaveꢀoutput,ꢀvoltageꢀcontrolledꢀoutputꢀfrequency,ꢀVCOCXO,ꢀ10.0ꢀMHzꢀoutputꢀfrequency.
ꢀ OH300-75005SV-020.0Mꢀ=ꢀ22x25x12.7mmꢀSMTꢀpackage,ꢀ-20ꢀtoꢀ70°Cꢀtemperatureꢀrange,ꢀ 50.0ꢀppbꢀfrequencyꢀstability,ꢀ5.0ꢀVdcꢀsupplyꢀꢀ
ꢀ voltage,ꢀSinewaveꢀoutput,ꢀvoltageꢀcontrolledꢀoutputꢀfrequency,ꢀVCOCXOꢀ,ꢀ20.0ꢀMHzꢀoutputꢀfrequency.
Bulletin
Cx210
1 of 6
Page
Attention: System Designers please review Application Note AN2093:
System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators.
@ www.conwin.com/support.html
Revision
16
Date
20 Oct 2016
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Absolute Maximum Ratings
Parameter
Minimum
Nominal
Maximum
125
Units
°C
Vdc
Vdc
Vdc
Vdc
Notes
Storage Temperature
-55
-
-
Supply Voltage
Control Voltage (Vc)
Operating Supply Voltage 3.3 Vdc (Vcc)
Operating Supply Voltage 5.0 Vdc (Vcc)
-0.5
7.0
7.0
3.47
5.25
-0.5
3.13
4.75
-
3.30
5.00
Absolute Ratings: Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress
ratings only. The functional operation of the device at those or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to conditions outside the "recommended operating conditions" for any extended period of time may adversely
impact device reliability and result in failures not covered by warranty.
Operating Specifications
Parameter
Minimum
Nominal
Maximum
Units
Notes
Center Frequency: (Fo)
Operating Temperature Range:
Temperature Code 5
Temperature Code 6
Temperature Code 7
Temperature Code 8
Temperature Code 9
Frequency Calibration:
Frequency Stability vs. Change in Temperature:
Stability Code 05
5
-
40
MHz
0
-
-
-
-
-
-
70
85
70
70
75
0.1
°C
°C
°C
°C
°C
-40
-20
-40
-20
-0.1
ppm
@ 25°C
-5.0
-10.0
-20.0
-50.0
-2.0
-
-
-
-
-
-
5.0
10.0
20.0
50.0
2.0
ppb
ppb
ppb
ppb
ppb
ppb
1, 2
2
2
2
5ꢀ
5ꢀ
Stability Code 10
Stability Code 20
Stability Code 50
Frequency Stability vs. Load
Frequency Stability vs. Voltage
Aging: Daily:
-2.0
2.0
5 MHz to 20 MHz
>20 MHz to 40 MHz
Aging: First Year:
-1.0
-2.0
-
-
1.0
2.0
ppb/day
ppb/day
3
3
5 MHz to 20 MHz
-50
-100
-
-
50
100
ppb
ppb
>20 MHz to 40 MHz
Lifetime Tolerance: (20 Years)
5 MHz to 20 MHz
>20 MHz to 40 MHz
Supply Voltage: (Vcc)
Voltage Code 03
-300
-500
-
-
300
500
ppb
ppb
4
4
3.13
4.75
3.30
5.00
3.47
5.25
Vdc
Vd
5
5
Voltage Code 05
Power Consumption: Turn-On
0 to 70°C Models
-
-
-
-
-
-
-
-
3.00
3.20
3.30
3.80
W
W
W
W
6
6
6
6
-20 to 70°C Models
-20 to 75°C Models
-40 to 85°C Models
Power Consumption: Steady State @ 25°C
0 to 70°C Models
-
-
-
-
-
-
-
-
-
-
-
-
1.10
1.15
1.20
1.50
1.0
-
W
W
W
W
ps rms
6
6
6
6
-20 to 70°C Models
-20 to 75°C Models
-40 to 85°C Models
Phase Jitter: (BW: 10 Hz to Fo/2)
Short Term Allan Deviation (1s)
Start-Up Time:
-
1.0E-11
-
-
500
5
ms
minutes
Warm Up Time @ 25°C:
7
Bulletin
Page
Cx210
2 of 6
16
Attention: System Designers please review Application Note AN2093:
System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators.
@ www.conwin.com/support.html
Revision
Date
20 Oct 2016
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches.
© Copyright 2016 The Connor-Winfield Corporation Not intended for life support applications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Phase Noise Characteristics
Typical Phase Noise for OH300-series with CMOS Output
Parameter
Units
Notes
SSB Phase Noise
± - 12 MHz
>12- 20 MHz >20 - 30 MHz
>30 - 40 MHz
@ 1Hz offset
-85
-80
-70
-65
-95
-120
-140
-150
-150
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
@ 10Hz offset
@ 100Hz offset
@ 1KHz offset
@ 10KHz offset
@ 100KHz offset
-115
-140
-145
-150
-150
-110
-135
-140
-150
-150
-100
-125
-140
-150
-150
Input Characteristics - Voltage Controlled Option (OCXO Type Code V)
Parameter
Minimum
Nominal
Maximum
Units
Notes
Control Voltage Range: (Vc)
3.3 Vdc Models
0.30
0.50
0.4
1.65
2.50
3.00
4.50
V
V
8
8
5.0 Vdc Models
Frequency Pullability:
Input Impedance
-
-
-
-
ppm
Ohms
100K
CMOS Output Characteristics (Output Code C)
Parameter
Minimum
Nominal
Maximum
Units
Notes
Load
-
15
-
pF
3.3 Vdc Models
Output Voltage: High (Voh)
Low (Vol)
Output Current: High (Ioh)
Low (Iol)
5.0 Vdc Models
Output Voltage: High (Voh)
Low (Vol)
Output Current: High (Ioh)
Low (Iol)
3.0
-
-4
-
-
-
-
-
-
0.4
-
V
V
mA
mA
4
4.7
-
-
-
-
0.4
-
V
V
mA
mA
ꢀ
ns
dBc
-8
-
-
-
8
Duty Cycle at 50ꢀ of Vcc
Rise / Fall Time: 10ꢀ to 90ꢀ
Spurious Output
45
-
-
50
-
55
6
-80
-
Sinewave Output Characteristics (Output Code S)
Parameter
Load
Output Power
Harmonics
Spurious
Minimum
Nominal
Maximum
Units
Ohms
dBm
dBc
Notes
-
5.0
-
50
-
-
-
-
-30
-80
-
-
dBc
Package Characteristics
Package consisting of a FR-4 substrate and Ryton-R-4 cover. Water Resistant package,
non-hermetic seal. (Engineering Properties of Ryton R-4 Application Note AN2100)
OH300 Package
Re-Stabilization Time
Off Time
Re stabilization Time
<2 Hours *
<1 Hour
<6 Hour
<12 Hours *
<24 Hour
1 to 16 Days
>16 Days
<48 Hours *
48 Hours + 1/4 Off Time *
<6 Days *
*ꢀForꢀaꢀgivenꢀoffꢀtime,ꢀtheꢀtimeꢀrequiredꢀtoꢀmeetꢀdailyꢀaging,ꢀshortꢀtermꢀstabilityꢀrequirements.
Notes:
1. ±±.0 ppb stability models are only available for temperature ranges 0 to 70°C and -20 to 70°C.
2. Frequency vs change in temperature, calculated as [(Fmax-Fmin)/(2*Fo)]. Control voltage at nominal value.
3. At time of shipment after 48 hours of operation.
4. Inclusive of calibration, operating temperature, supply voltage change, load change and 20 years aging.
±. Supply voltage must reach Vcc levels monotonically within a ramp-up time of <12 ms.
6. Measured with Vcc = Nominal, in calm air.
7. Measured @ 2±°C, within ±100 ppb, referenced one hour after turn-on.
8. To ensure proper operation of VCOCXO, the control voltage input must be biased the nominal control voltage.
Failure to bias the Vc input will cause an unstable output condition.
Bulletin
Page
Cx210
3 of 6
Revision
Date
16
20 Oct 2016
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches.
© Copyright 2016 The Connor-Winfield Corporation Not intended for life support applications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Environmental Characteristics
Shock
100 G's 3ms, Halfsine, 3 shocks per direction, per MIL-STD 202G, Method 213B Test Condition D.
0.06” D.A. or 10G’s Peak, 10 to 500 Hz, per MIL-STD-202G, Method 204D, Test Condition A.
5.35 G’s rms. 20 to 2000 Hz per MIL-STD-202G, Method 214,Test Condition 1A, 15 minutes each axis.
70,000 ft max
Sinusoidal Vibration
Random Vibration
Altitude
Moisture
10 cycles, 95ꢀ RH, Per MIL-STD-202G, Method 112.
Marking Permanency
Per MIL-STD-202G, Method 215J.
Solder Process Recommendations: RoHS compliant, lead free. See solder profile on page 6.
In-line reflow:
Refer to recommended reflow pre-heat and reflow temperatures on page 6. Package material
consist of Ryton R-4 high temperature cover with FR4 substrate. Component solder is Pb free
high temperature eutectic alloy with a melting point of 221°C.|
We recommend using KIC profiler or similar device placing one of the thermocouples on the
device to insure that the internal package temperature does not exceed 221°C.
If for any reason the device needs to be removed from the board, use a temperature controlled
repair station with profile monitoring capabilities. Following a monitored profile will insure the
device is properly pre-heated prior to relow. Refer to IPC 610E for inspection guidelines.
In-line oven profile:
Removal of device:
Recommended Cleaning Process:(If required)
Device is non-hermetic, water resistance with four weep holes, one in each corner to allow
moisture to be removed during the drying cycle. We recommend in-line warm water wash
with air knife and drying capabilities. If cleaner does not have drying capability, then use hot air
circulated oven. Boards should be placed in the oven vertically for good water runoff
Device must be dried properly prior to use!
Note: If saponifier is used make sure the device is rinsed properly to insure all residues are removed. PH of saponifier should
not exceed 10.
Drying Temperature:
Between 85 to 100°C.
Drying Time:
Time will vary depending on the board size.
Caution: Do not submerge the device!
Package Outline
Suggested Pad Layout
0.866+/-0.008
(22.00+/-0.20mm)
0.200
(5.08mm)
0.300
(7.62mm)
0.150
(3.81mm)
0.200
(5.08mm)
0.300
(7.62mm)
0.200
(5.08mm)
0.125
(3.175mm)
Typ.
(
W
1238
I
Typ.
0.120
(3.048mm)
OH300-61003CF
38.88 MHZ
1.000+/-0.008
(25.40+/-0.20mm)
0123456789012
0123456789012
(Bottom View)
(Top View)
0.905
(22.99mm)
0.350
(8.89mm)
Pin 1
Typical Pad Size
0.700
(17.78mm)
0.100 x 0.100
(2.54 x 2.54mm)
7 Places
Keep Out
Area
0.350
(8.89mm)
0.350
(8.89mm)
0.062
(1.57mm)
0.500
(12.70mm)
Max.
Dimensional Tolerance
+/-0.005 (0.127mm)
* Do not route any traces in the keep out area. It is recommended
the next layer under the keep out area is to be ground plane.
Pad Termination Finish: Gold Flash <10 micro inches
Marking Information
Pad Connections
1: Voltage Control or N/C
2: N/C
3: Supply Voltage (Vcc)
4: RF Output
±: Do Not Connect
6: Do Not Connect
7: Ground (Case)
(
Date Code (YYWW)
W
1238
I
Model Number
Output Frequency
Serial # Barcode
Serial Number
OH300-61003CF
38.88 MHZ
0123456789012
0123456789012
DO NOT connect "DNC" pads to ground
or supply rails.
Pin 1
Bulletin
Page
Cx210
4 of 6
Attention: System Designers please review Application Note AN2093:
System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators.
@ www.conwin.com/support.html
Revision
Date
16
20 Oct 2016
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches.
© Copyright 2016 The Connor-Winfield Corporation Not intended for life support applications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Test Circuit CMOS Output
Voltage
Control
or
Frequency
Counter
Vcc
N/C
Ground
DNC
Power
Supply
1
7
6
N/C
Vcc
DNC
2
3
10uF
to
100 uF
5
-
+
0.01 uF
15 pF
4
RF Out
DNC = Do Not Connect
DO NOT connect "DNC" pads
to ground or supply rails.
Scope
Ground
Test Circuit Sinewave Output
Voltage
Control
or
Frequency
Counter
Vcc
N/C
Ground
Power
Supply
1
7
6
DNC
DNC
N/C
Vcc
2
3
10uF
to
100 uF
50
Ohm
5
-
+
0.01 uF
4
RF Out
DNC = Do Not Connect
DO NOT connect "DNC" pads
to ground or supply rails.
Scope
Ground
Sinewave Output Waveform
CMOS Output Waveform
Sinewave Output, +5 dBm minimum into 50 Ohms
CMOS Output, Squarewave
90%
50%
10%
Bulletin
Cx210
5 of 6
Attention: System Designers please review Application Note AN2093:
System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators.
@ www.conwin.com/support.html
Page
Revision
Date
16
20 Oct 2016
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches.
© Copyright 2016 The Connor-Winfield Corporation Not intended for life support applications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Solder Profile
Temperature
260°C
260°C
220°C
180°C
150°C
120°C
0
10 s
Up to 120 s
60 to 90 s
Typical
Typical
Meets IPC/JEDEC J-STD-020C
Tape and Reel Information
0 1 2 3 4 5 6 7 8 9 0 1 2
0 1 2 3 4 5 6 7 8 9 0 1 2
M H Z 3 8 . 8 8
O H 3 0 0 - 6 1 0 0 3 C F
I
1 2 3 8
W
(
Revision History
Revision Date
Changes
P00
P01
P02
P03
P04
P05
P06
07
01/26/11 New issue
05/04/11 Added tape and reel information
05/06/11 Added OH300 Photo
05/25/11 updated Description
07/27/11 Updated power consumption and changed package drawing
09/08/11 Added sinewave models to the data sheet
08/09/12 added cleaning process and package characteristics.
09/27/12 added Barcode to package marking
08
11/06/12 Added link to Application Note: AN2093
09
11/14/12 Added additional notes
10
12/07/12 Added additional notes
11
04/03/13 Added 5ppb models
12
04/24/13 Updated Environmental Characteristics, added output drive current
05/13/13 Changed note 5 and removed note from power supply line, added absolute note
11/15/13 Added Voltage Control Option
13
14
15
03/06/15 Updated temperature ranges for +/-5ppb models and Environmental Characteristics
10/20/16 Reword notes 1 and 2, remove RMS from units of Allan Deviation.
16
Bulletin
Cx210
6 of 6
Attention: System Designers please review Application Note AN2093:
System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators.
@ www.conwin.com/support.html
Page
Revision
16
Date
20 Oct 2016
Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches.
© Copyright 2016 The Connor-Winfield Corporation Not intended for life support applications.
相关型号:
OH300-51003SV-040.0M
Sine Output Oscillator, 40MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-7
CONNOR-WINFIE
OH300-51003SV-FREQ1
Sine Output Oscillator, 5MHz Min, 20MHz Max, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-7
CONNOR-WINFIE
OH300-51005CF-038.88M
CMOS Output Clock Oscillator, 38.88MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-7
CONNOR-WINFIE
OH300-51005CF-040.0M
CMOS Output Clock Oscillator, 40MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-7
CONNOR-WINFIE
OH300-51005SF-FREQ1
Sine Output Oscillator, 5MHz Min, 20MHz Max, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-7
CONNOR-WINFIE
OH300-52003CF-005.0M
CMOS Output Clock Oscillator, 5MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-7
CONNOR-WINFIE
OH300-52003CF-040.0M
CMOS Output Clock Oscillator, 40MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-7
CONNOR-WINFIE
OH300-52003CF-FREQ1
CMOS Output Clock Oscillator, 5MHz Min, 20MHz Max, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-7
CONNOR-WINFIE
OH300-52003CF-FREQ2
CMOS Output Clock Oscillator, 20MHz Min, 40MHz Max, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-7
CONNOR-WINFIE
OH300-52003CV-040.0M
CMOS Output Clock Oscillator, 40MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-7
CONNOR-WINFIE
OH300-52003CV-FREQ1
CMOS Output Clock Oscillator, 5MHz Min, 20MHz Max, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-7
CONNOR-WINFIE
OH300-52003CV-FREQ2
CMOS Output Clock Oscillator, 20MHz Min, 40MHz Max, ROHS COMPLIANT, HERMETIC SEALED, RESISTANCE WELDED PACKAGE-7
CONNOR-WINFIE
©2020 ICPDF网 联系我们和版权申明