T502-FREQ [CONNOR-WINFIELD]
LVCMOS Output Clock Oscillator, 6.4MHz Min, 40MHz Max, ROHS COMPLIANT, MINIATURE; HERMETIC SEALED, SMD, 10 PIN;型号: | T502-FREQ |
厂家: | CONNOR-WINFIELD CORPORATION |
描述: | LVCMOS Output Clock Oscillator, 6.4MHz Min, 40MHz Max, ROHS COMPLIANT, MINIATURE; HERMETIC SEALED, SMD, 10 PIN 机械 振荡器 |
文件: | 总4页 (文件大小:317K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Telecom Performance
TCXO / VCTCXO
Description:
Features
•ꢀ Miniatureꢀ5.0ꢀxꢀ7.0mmꢀSurfaceꢀMountꢀPackage
•ꢀ 3.3VꢀOperation
2111 Comprehensive Drive
The Connor-Winfield
•ꢀ LVCMOSꢀorꢀClippedꢀSinewaveꢀOutputꢀLogic
•ꢀ FrequencyꢀStabilitiesꢀAvailable:
Aurora, Illinois 60505
5.0x7.0mm Temperature
Compensated Crystal
Controlled Oscillators
and Voltage Controlled
Phone: 630-851-4722
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
T50xꢀ/ꢀT60xꢀ/ꢀT70x:ꢀ+-0.28ppm
T51xꢀ/ꢀT61xꢀ/ꢀT71x:ꢀ+0.50ppm
T52xꢀ/ꢀT62xꢀ/ꢀT72x:ꢀ1.00ppm
Fax: 630-851-5040
•ꢀ TemperatureꢀRangesꢀAvailable:
www.conwin.com
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
T5xxꢀSeries:ꢀ0ꢀtoꢀ70°C
T6xxꢀSeries:ꢀ-40ꢀtoꢀ85°C
T7xxꢀSeries:ꢀ-20ꢀtoꢀ70°C
US Headquarters:
630-851-4722
Temperature Compensated Crystal
Controlled Oscillators are designed for use
in S3 Telecom Applications. Through the
use of Analog Temperature Compensation,
this device is capable of holding sub 1-ppm
stabilities over the commercial or the
industrial temperature ranges. All models
meet +/-4.6 ppm accuracies for twenty
years. Three STRATUM 3 compliant model
series are available.
•ꢀ FrequencyꢀTolerance:ꢀ+/-4.60ppmꢀforꢀ20ꢀyrs.
•ꢀ Aging:ꢀ<4.63E-13ꢀ/ꢀsecond
•ꢀ LowꢀJitterꢀ<1pSꢀRMS
•ꢀ Tri-StateꢀEnable/Disable
•ꢀ TapeꢀandꢀReelꢀPackaging
•ꢀ RoHSꢀCompliantꢀ/ꢀLeadꢀFree
•ꢀ RecommendedꢀforꢀNewꢀDesigns
European Headquarters:
+353-61-472221
STRATUM 3 Applications
•ꢀ TimingꢀReferenceꢀClocks
•ꢀ Instrumentation
LVCMOS Test Circuit
DNC
DNC
DNC
Package Layout
1
2
3
Pin Connections
N/C - TCX O
VC - VCTCX O
10
9
4
5
0.079 Max.
(2.0mm)
0.276 0.006
(7.0mm)
Vcc
Supply
Voltage
1: Do Not Connect
2: Do Not Connect
3: Do Not Connect
4: Ground
Output
8
7
6
.01 uF
Bypass
0.197
0.006
(5.0mm)
15 pF
T504 0702
19.44MHz
DNC DNC
E/D
5: Output
0.025(6 Places)
(0.635mm)
Pin 1
0.040
6: Do Not Connect
7: Do Not Connect
8: Tri-state Enable /Disable
9: Supply, Vcc
10: Voltage Control (VCTCXO)
N/C (TCXO)
(1.02mm)
(6 Places)
1
2
3
10
9
4
0.030
(0.762mm)
(4 Places)
Bottom
View
0.100
(2.54mm)
Clipped Sinewave Test Circuit
5
6
7
8
Dimensional Tolerance:
.005 (.127mm)
.02 (.508mm)
0.038
(0.965mm)
(4 Places)
0.100
(2.54mm)
DNC
DNC
DNC
1
2
3
Voltage
Control
10
9
4
5
Vcc
Supply
Voltage
Standard Frequencies Available *
Output
10 pF
8
7
6
6.4 MHz, 9.72 MHz, 10.0 MHz, 10.24 MHz, 12.5 MHz, 12.8 MHz,
13.5 MHz, 19.2 MHz, 19.44 MHz, 20.0 MHz, 20.48 MHz, 25.0 MHz,
27.0 MHz, 38.88 MHz
.01 uF
Bypass
10Kohm
DNC DNC
E/D
*
Available frequencies from the factory for small quantity orders or
quick delivery. Additional frequencies are available.
Ordering Information
Table 1.0
T
0
4
019.44M
5
Features
2 = TCXO, LVCMOS, 3.3 Vdc
3 = TCXO, Clipped Sinewave, 3.3 Vdc
4 = VCTCXO, LVCMOS, 3.3 Vdc
5 = VCTCXO, Clipped Sinewave, 3.3 Vdc
Type:
Precision
Output Frequency
Frequency Format
-xxx.xM Min. *
-xxx.xxxxxxM Max.*
* Amount of numbers
after the decimal point.
M = MHz
Temperature
Range
5 = 0 to 70°C
6 = -40 to 85°C
7 = -20 to 70°C
Frequency
Stability
0 = 0.28 ppm
1 = 0.50 ppm
2 = 1.00 ppm
TCXO
VCTCXO
5x7mm
Example:
Bulletin
Tx176
1 of 4
T504-019.44M = 5x7mm, VCTCXO, LVCMOS, 3.3Vdc, 0 to 70°C, 28ppm, Output Frequency 19.44MHz
To order an T504 with an output frequency of: 6.4 MHz = T504-006.4M
20 MHz = T504-020.0M
Page
Revision
10
Date
07 Jan 2010
38.88 MHz = T504-038.88M
Specifications subject to change without notice. All dimensions in inches. © Copyright 2009 The Connor-Winfield Corporation
Absolute Maximum Ratings
Table 2
Parameter
Minimum
-55
Nominal
Maximum
125
Units
°C
Vdc
Vdc
Notes
Storage Temperature
Supply Voltage (Vcc)
Input Voltage
-
-
-
-0.5
6.0
-0.5
Vcc+0.5
Model Specifications
Table 3.0
Model Number
T502
T503
T504
T604
T704
T505
T605
T705
Temperature Range
0 to 70°C
Model Number
Temperature Range
T602
T702
T603
-40 to 85°C
Model Number
Temperature Range
T703
-20 to 70°C
Output Type
LVCMOS
TCXO
Clipped Sinewave
LVCMOS
VCTCXO
Clipped Sinewave
VCTCXO
TCXO / VCTCXO
Frequency Range
Frequency Stability
Supply Voltage
Holdover Stability
Aging / Life
TCXO
6.4 to 40 MHz
0.28ppm
3.3Vdc
0.32ppm
3.0ppm
40ppb
4.63E-13
1
2
3
Aging / Day
Aging / Second
Model Specifications
Table 4.0
Model Number
T512
T612
T712
T513
T514 T515
T614
Temperature Range
0 to 70°C
Model Number
Temperature Range
T613
-40 to 85°C
T615
T715
Model Number
Temperature Range
T713
-20 to 70°C
T714
Output Type
LVCMOS
TCXO
Clipped Sinewave
LVCMOS
VCTCXO
Clipped Sinewave
VCTCXO
TCXO / VCTCXO
Frequency Range
Frequency Stability
Supply Voltage
TCXO
6.4 to 40 MHz
0.50ppm
3.3Vdc
1
3
Frequency Aging
3.0ppm
Model Specifications
Table 5.0
Model Number
T522
T622
T722
T523
T524
T624
T724
T525
T625
T725
Temperature Range
0 to 70°C
Model Number
Temperature Range
T623
-40 to 85°C
Model Number
Temperature Range
T723
-20 to 70°C
Output Type
LVCMOS
TCXO
Clipped Sinewave
LVCMOS
VCTCXO
Clipped Sinewave
VCTCXO
TCXO / VCTCXO
Frequency Range
Frequency Stability
Supply Voltage
TCXO
6.4 to 40 MHz
1.00ppm
3.3Vdc
1
3
Frequency Aging
3.0ppm
Notes:
1) Frequency stability vs. change in temperature. [± ±Fmaꢀ ꢁ Fmin)ꢂ/.Fo].
/) Inclusive of frequency stability, supply voltage change ±± 1ꢃ), aging, for /4 hours.
3) Over twenty years.
Data Sheet: Tx176
Rev: 10
Date: 01/07/10
© Copyright 2010 The Connor-Winfield Corp. All Rights Reserved Specifications subject to change without notice
Operating Specifications
Table 6.0
Parameter
Minimum
Nominal
Maximum
1.00
0.05
0.05
0.4
Units Notes
ppm
ppm
TCXO Frequency Calibration @ 25°C
Supply Voltage Variation. (Vcc 5ꢀ)
Load Coefficient, 5ꢀ
Static Temperature Hysteresis
Total Frequency Tolerance
Supply Voltage ( 5ꢀ)
Supply Current
Period Jitter
Integrated Phase Jitter (BW=12kHz to 20MHz)
SSB Phase Noise at 10Hz offset
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
SSB Phase Noise at >10KHz offset
SSB Phase Noise at >100KHz offset
Start Up Time
-1.00
-
-
-
-
-
1
-0.05
-0.05
-0.4
-4.60
ppm
ppm
ppm
Vdc
2
3
4
4.60
3.465
10
5
1.0
(Vcc)
(Icc)
3.135
3.3
6
3
0.3
-90
-120
-140
-150
-152
-
-
-
-
-
-
-
-
-
-
mA
ps rms
ps rms
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ms
-85
5
5
5
5
5
6
-115
-135
-145
-157
1
Input Characteristics For Enable / Disable Function (Pad 8)
Table 7.0
Parameter
Enable Voltage (High) or open circuit
Disable Voltage (Low) Output Tri-stated
Minimum
70ꢀ Vcc
-
Nominal
Maximum
-
30ꢀ Vcc
Units Notes
Vdc
Vdc
(Vih)
(Vil)
-
-
7
Input Characteristics For Voltage Control (Pad10)
Parameter
Control Voltage Range (Vcc = 3.3V)
Frequency Tuning
Linearity
Table 8.0
Minimum
0.3
10
5
100K
Positive
Nominal
Maximum
Units Notes
(Vc)
1.65
3.0
Vdc
ppm
ꢀ
-
-
-
-
-
-
8
Input Impedance
Slope
Ohm
LVCMOS Output Characteristics
Table 9.0
Parameter
Minimum
Nominal
Maximum
Units Notes
LOAD
-
15
-
-
-
-
50
-
-
pF
Vdc
Vdc
mA
mA
ꢀ
9
Voltage
(High)
(Low)
(High)
(Low)
(Voh)
(Vol)
(Ioh)
(Iol)
90ꢀVcc
-
-
-4
-
45
-
10ꢀVcc
Current
-
4
55
8
Duty Cycle at 50ꢀ of Vcc
Rise / Fall Time 10ꢀ to 90ꢀ
ns
Clipped Sinewave Output Characteristics
Table 10.0
Parameter
Load
Minimum
Nominal
Maximum
Units Notes
10
Output Load Resistance
Output Load Capacitance
Output Voltage (< 40 MHz)
Output Voltage (> 40 MHz)
-
-
10K
0
-
-
-
-
-
Ohms
pF
V pk-pk
V pk-pk
11
1.00
0.80
-
Note
1) TCXO: Initial calibration @ /5°C. Specifications at time of shipment after 48 hours of operation.
/) Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at /5°C.
3) Inclusive of calibration @ /5°C, frequency vs. change in temperature, change in supply voltage ±± 5ꢃ), load change ±± 5ꢃ), reflow soldering process
and /0 years aging.
4) For best in application performance, careful selection of an eꢀternal power source is critical. Select an eꢀternal regulator that meets or eꢀceeds to
following specifications regarding voltage regulation tolerance, initial accuracy, temperature coefficient, voltage noise, and low voltage noise density
FactoryTest Conditions: Initial Accuracy ± /mv, Noise ±0.1Hz to 10 KHz) 15uV p-p, Voltage Noise Density = 50nVꢂsrt Hz, Temperature Coefficient
< 5ppmºC.
5) Phase noise measurements Fo = /0 MHz, other frequencies may vary by /0log Fꢂ/0MHz.
6) Typical start up time for the frequency range of 1/.8 MHz to /5 MHz <330 us.
7) Leave Pad 8 unconnected if enable ꢂ disable function is not required.When tri-stated, the output stage is disabled but the oscillator and compensation
circuit are still active ±current consumption < 1mA).
8) Additional pull ranges are available; please contact the factory for additional information.
9) For best performance it is recommended that the device connected to this output should have an equivalent input capacitance of 15pF.
10) Output is AC coupled.
11) For best performance it is recommended that the device connected to this output should have an equivalent input capacitance of 10pF.
Data Sheet: Tx176
Rev: 10
Date: 01/07/10
© Copyright 2010 The Connor-Winfield Corp. All Rights Reserved Specifications subject to change without notice
Package Characteristics
Table 11.0
Table 12.0
Package
Hermetically sealed surface mount package with metal cover.
Environmental Characteristics
2111 Comprehensive Drive
Arora, Illinois 60505
Vibration:
Shock:
Soldering:
Vibration per Mil Std 883E Method 2007.3 Test Condition A
Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.
SMD product suitable for Convection Reflow soldering. Peak
temperature 260°C. Maximum time above 220°C, 60 seconds.
Solderability per Mil Std 883E Method 2003
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Solderability;
Design Recommendations
Vcc, should have
a large copper
area for reduced
inductance.
Connect a 0.01 uF
bypass capacitor
<0.1" (2.54mm)
from the pad.
0.010" (0.254mm)
Recommended
clearance
inductance
for internal
copper flood.
50 Ohm trace
< 1" by design
Vcc
Suggested Pad Layout
8
6
3
0.295
(7.49mm)
5
9
Buffer
0.051
(1.28mm)
0.030
4
(0.76mm)
10
Ground
Ground
1
should have
a large
Top View
Ground
Top View
copper
0.037
area for
(0.94mm)
Keep Out Area
reduced
inductance
Top View
0.215
(5.46mm)
0.051
(1.28mm)
50 Ohm Trace
1
Without
Vias
Output
Buffer
Dimensional Tolerance:
.005 (.127mm)
.02 (.508mm)
Solder Profile
Temperature
260˚C
260˚C
Typical Phase Noise
220˚C
180˚C
150˚C
120˚C
Model T504-019.44MHz
0
Time
120 S
Max.
10 S
60 S
Max.
360 Sec. Max.
LVCMOS Output Waveform
90%
50%
10%
Tape and Reel Specifications
Clipped Sinewave Output Waveform
DNC
DNC
DNC
1
2
3
Voltage
Control
10
9
4
5
Vcc
Supply
Voltage
Output
10 pF
8
7
6
1
.01 uF
Bypass
10Kohm
DNC DNC
E/D
Bulletin
Page
Tx176
4 of 4
Revision
Date
10
07 Jan 2010
相关型号:
©2020 ICPDF网 联系我们和版权申明