TB503-0.10.0M [CONNOR-WINFIELD]
Clipped Sine Output Oscillator;型号: | TB503-0.10.0M |
厂家: | CONNOR-WINFIELD CORPORATION |
描述: | Clipped Sine Output Oscillator 振荡器 |
文件: | 总6页 (文件大小:657K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
High Precision
TCXO / VCTCXO
Oscillators
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Description:
Features:
Frequency Stabilities Available:
+/-0.2ꢀ ppm
+/-0.50 ppm, +/-1.00 ppm, +/-2.00 ppm
Temperature Ranges Available:
0 to ꢀ5°C, 0 to 70°C, -40 to ꢀ5°C, -20 to 70°C
Packages Available:
TB - Series: 5 x 7mm - 10 Pad
TVB - Series: 5 x 7mm - 4 Pad
3.3 Vdc Operation
Output Logic: LVCMOS or Clipped Sinewave
Fixed Frequency - TCXO
Connor-Winfield's TBxxx and TVBxxx series
are 5x7 TCXO and VCTCXO products with
exceptional frequency stability and low phase
noise. Through the use of analog temperature
compensation, these products are capable
of holding Stratum 3 - level temperature
stabilities of 0.2ꢀ ppm over the commercial
and industrial temperature ranges. Available
in 4-pad or 10-pad surface mount footprints,
these products are designed for high
density mounting and are optimum for mass
production.
Voltage Controlled - VCTCXO
Low Jitter <0.50 ps RMS
Low Phase Noise
Tri-State Enable/Disable:
TB - Series Only
Tape and Reel Packaging
RoHS Compliant / Lead Free
Applications:
Basestation, Communications,DSL / ADSL,
Femtocell, IP Timing, LTE, Precision GPS,
SONET / SDH, WiMAX / WiBro, WLAN.
Standard Frequencies Available *
6.4 MHz, 10.0 MHz, 12.5 MHz, 12.ꢀ MHz, 20.0 MHz, 25.0 MHz
Available frequencies from the factory for small quantity orders or quick delivery.
*
Additional frequencies are available.
Ordering Information
5
0
- 010.0M
4
TVB
Type / Package
TCXO / VCTCXO
Series
Temperature
Range
3 = 0 to ꢀ5 °C
5 = 0 to 70°C
6 = -40 to ꢀ5°C
7 = -20 to 70°C
Features
2 = TCXO, LVCMOS, 3.3 Vdc
3 = TCXO, Clipped Sinewave, 3.3 Vdc
4 = VCTCXO, LVCMOS, 3.3 Vdc
5 = VCTCXO, Clipped Sinewave, 3.3 Vdc
Frequency
Stability
0 = 0.2ꢀ ppm
1 = 0.50 ppm
2 = 1.00 ppm
3 = 2.00 ppm
Output Frequency
Frequency Format
-xxx.xM Min
-xxx.xxxxxxM Max
*Amount of numbers after
the decimal point.
M = MHz
TB = 5.0x7.0 mm
10 Pads
TVB = 5.0x7.0 mm
4 Pads
Example: Part Number
Bulletin
Tx380
1 of 6
TVB504-010.0M = 5x7mm 4 pad package, 0.2ꢀ ppm, 0 to 70°C, 3.3 Vdc, LVCMOS Output, VCTCXO
TB715-012.ꢀM = 5x7mm 10 pad package, 0.50 ppm, -20 to 70°C, 3.3 Vdc, Clipped Sinewave Output, VCTCXO
TB622-050.0M = 5x7mm 10 pad package, 1.0 ppm, -40 to ꢀ5°C, 3.3 Vdc, LVCMOS Output, TCXO
TVB602-010.0M = 5x7mm 4 pad package, 0.2ꢀ ppm, -40 to ꢀ5°C, 3.3 Vdc, LVCMOS Output, TCXO
Page
Revision
00
Date
23 Oct 2012
Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Absolute Maximum Ratings
Parameter
Minimum
-55
Nominal
Maximum
125
Units
°C
Vdc
Vdc
Notes
Storage Temperature
Supply Voltage (Vcc)
Input Voltage (Vc)
-
-
-
-0.5
-0.5
6.0
Vcc + 0.5
Operating Specifications
Parameter
Minimum
Nominal
Maximum
Units
Notes
Output Frequency (Fo)
Operating Temperature Range
Model TB3xx, TVB3xx
Model TB5xx, TVB5xx
Model TB6xx, TVB6xx
Model TB7xx, TVB7xx
Frequency Calibration @ 25 °C
10
-
52
MHz
(See Ordering Information for full part number)
0
0
-40
-20
-1.0
-
-
-
-
-
85
70
85
70
1.0
°C
°C
°C
°C
ppm
1
Frequency Stability
Model TBx0x, TVBx0x
Holdover Stability
Frequency Stability
Model TBx1x, TVBx1x
Model TBx2x, TVBx2x
Model TBx3x, TVBx3x
Frequency vs. Load Stability
Frequency vs. Voltage Stability
Static Temperature Hysteresis
Freq. shift after reflow soldering
Long Term Stability
Aging
(See Ordering Information for full part number)
-0.28
-0.32
-
-
0.28
0.32
ppm
ppm
2
3
(See Ordering Information for full part number)
-0.50
-1.00
-2.00
-0.20
-0.20
-
-
-
-
-
-
-
-
-
0.50
1.00
2.00
0.20
0.20
0.40
1.0
ppm
ppm
ppm
ppm
ppm
ppm
ppm
ppm
2
2
2
5ꢀ
5ꢀ
4
5
6
-1.0
-1.0
1.0
per Life (20 Years)
per Day
per Second
-3.0
-40
-
-
-
3.0
40
ppm
ppb
4.63E-13
3.30
Supply Voltage (Vcc)
Supply Current (Icc)
LVCMOS
Clipped Sinewave
Jitter:
3.135
3.465
Vdc
-
-
2.1
1.3
6.0
2.9
mA
mA
Period Jitter
Integrated Phase Jitter (12K to Fo/2)-
SSB Phase Noise for Fo=10.0 MHz
-
3.0
0.5
5.0
1.0
ps RMS
ps RMS
7
@ 1 Hz offset
@ 10 Hz offset
@ 100 Hz offset
@ 1 KHz offset
@ 10 KHz offset
@ 100 KHz offset
@ 1 MHz offset
Start-Up Time
-
-
-
-
-
-
-
-65
-98
-
-
-
-
-
-
-
-
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
10
-125
-143
-153
-155
-157
-
ms
Bulletin
Tx380
2 of 6
Page
Revision
Date
00
23 Oct 2012
Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Control Voltage Input Characteristics
Parameter
Minimum
0.3
Nominal
Maximum
Units
V
Notes
Control Voltage
1.65
3.0
-
Frequency Pullability
Control Voltage Slope
Monotonic Linearity
Input Impedance
10
-
ppm
Positive Slope
-
-
-
-
10
-
-
ꢀ
Ohm
KHz
100K
10
Modulation Bandwidth (3dB)
Enable /Disable Input Characteristics (Pad 8)
TB Series only
Parameter
Minimum
Nominal
Maximum
Units
Notes
Enable Input Voltage -(Vih)
Disable Input Voltage - (Vil)
70ꢀVcc
-
-
-
-
Vdc
Vdc
8
8
30ꢀVcc
Function
Output
Low:
Disabled (High Impedance)
Enabled
High or Open:
LVCMOS Output Characteristics
Parameter
Minimum
Nominal
Maximum
Units
Notes
Load (CL)
-
15
-
-
pF
Vdc
Vdc
ꢀ
8
Voltage (High) (Voh)
90ꢀVcc
-
10ꢀVcc
55
(Low)
(Vol)
-
45
-
-
Duty Cycle at 50ꢀ of Vcc
Rise / Fall Time 10ꢀ to 90ꢀ
50
4
8
ns
Clipped Sinewave Output Characteristics
Parameter
Minimum
Nominal
Maximum
Units
Notes
Load (CL)
Output Load Resistance
-
10K
10
1.2
1.0
-
-
-
-
Ohm
pF
V
Output Load Capacitance
Output Voltage(< 40 MHz)
Output Voltage(>40 MHz)
-
1.0
0.8
pk-pk
pk-pk
V
Package Characteristics
Package
Hermetically sealed ceramic package with grounded metal cover
Environmental Characteristics
Vibration:
Vibration per Mil Std 883E Method 2007.3 Test Condition A.
Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.
RoHS compliant lead free. See soldering profile on page 2.
Shock:
Soldering Process:
Notes:
ꢀ 1.ꢀInitialꢀcalibrationꢀ@ꢀ25°C.ꢀ 2°C,ꢀforꢀVCTCXO'sꢀVcꢀ=ꢀ1.65V.ꢀSpecificationsꢀatꢀtimeꢀofꢀshipmentꢀafterꢀ48ꢀhoursꢀofꢀoperation.
ꢀ 2.ꢀFrequencyꢀstabilityꢀvs.ꢀchangeꢀinꢀtemperature.ꢀ[ (Fmax-Fmin)/2.Fo].ꢀForꢀVCTCXO'sꢀ-ꢀVcꢀ-=ꢀ1.65V
ꢀ 3.ꢀInclusiveꢀofꢀfrequencyꢀstability,ꢀsupplyꢀvoltageꢀchangeꢀ( 1ꢁ),ꢀaging,ꢀforꢀ24ꢀhours.
ꢀ 4.ꢀFrequencyꢀchangeꢀafterꢀreciprocalꢀtemperatureꢀrampedꢀoverꢀtheꢀoperatingꢀrange.ꢀFrequencyꢀmeasuredꢀbeforeꢀandꢀafterꢀatꢀ25°C
ꢀ 5.ꢀTwoꢀconsecutiveꢀsolderꢀreflowsꢀafterꢀ1ꢀhourꢀrecoveryꢀ@ꢀ25°C.
ꢀ 6.ꢀFrequencyꢀdriftꢀoverꢀ1ꢀyearꢀ@ꢀ25°C.
ꢀ 7.ꢀBWꢀ=ꢀ12ꢀKHzꢀtoꢀ20ꢀMHz
ꢀ 8.ꢀLeaveꢀPadꢀ8ꢀꢀonꢀtheꢀTBꢀSeriesꢀunconnectedꢀifꢀenableꢀ/ꢀdisableꢀfunctionꢀisꢀnotꢀrequired.ꢀWhenꢀtri-stated,ꢀtheꢀoutputꢀstageꢀisꢀꢀ
ꢀ ꢀ disabledꢀbutꢀtheꢀoscillatorꢀandꢀcompensationꢀcircuitꢀareꢀstillꢀactiveꢀ(currentꢀconsumptionꢀꢀ<ꢀ1ꢀmA).
ꢀ 8.ꢀAttention:ꢀToꢀachieveꢀoptimalꢀfrequencyꢀstability,ꢀandꢀinꢀsomeꢀcasesꢀtoꢀmeetꢀtheꢀspecificationꢀstatedꢀonꢀthisꢀdataꢀsheet,ꢀꢀ
ꢀ ꢀ itꢀisꢀrequiredꢀthatꢀtheꢀcircuitꢀconnectedꢀtoꢀthisꢀTCXOꢀoutputꢀmustꢀhaveꢀtheꢀequivalentꢀinputꢀcapacitanceꢀthatꢀisꢀspecifiedꢀꢀ
ꢀ
ꢀ ꢀ byꢀtheꢀnominalꢀloadꢀcapacitance.ꢀDeviationsꢀfromꢀtheꢀnominalꢀloadꢀcapacitanceꢀwillꢀhaveꢀaꢀgraduatedꢀeffectꢀonꢀtheꢀstabilityꢀofꢀꢀ
ꢀ ꢀ approximatelyꢀ20ꢀppbꢀperꢀpFꢀloadꢀdifference..
Bulletin
Page
Tx380
3 of 6
Revision
Date
00
23 Oct 2012
Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
TB Series
Package Outline
TB Series
Suggested Pad Layout
TB Series
Pad Connections
0.079 Max.
(2.0mm)
0.276 0.006
(7.0mm)
0.295
(7.49mm)
0.051
1:
2:
3:
4:
5:
6:
7:
8:
9:
Do Not Connect
Do Not Connect
Do Not Connect
Ground
0.030
(0.76mm)
(1.28mm)
Keep Out Area
0.197
0.006
(5.0mm)
7
8
6
TB715 1242
12.8 MHZ
5
4
9
0.037
(0.94mm)
Top View
0.215
(5.46mm)
Output
10
0.051
0.025(6 Places)
(0.635mm)
Pin 1
2
Do Not Connect
Do Not Connect
Enable / Disable
Supply Voltage (Vcc
3
1
(1.28mm)
0.040
(1.02mm)
(6 Places)
1
2
3
10
9
4
0.030
0.100
Bottom
View
(0.762mm)
(4 Places)
(2.54mm)
10: VCTCXO: Control Voltage (Vc)
TCXO: N/C
5
6
7
8
* Do not route any traces in the keep out area. It
is recommended the next layer under the keep
out area is to be ground plane.
Dimensional Tolerance:
.005 (.127mm)
0.038
0.100
(0.965mm)
(4 Places)
.02 (.508mm)
(2.54mm)
TVB Series
Package Outline
TVB Series
Suggested Pad Layout
TVB Series
Pad Connections
.±276 ± .±..6
(7±.mm)
.±.79 Max±
(2±.mm)
0.071
(1.8mm)
4 Places
4
3
.±197
± .±..6
(0±.mm)
TVB0.4 1242
1.±. MHZ
1:
VCTCXO: Voltage Control (Vc)
TCXO: N/C
Ground
Output
Supply (Vcc)
0.047
(1.2mm)
4 Places
0.165
(4.2mm)
(Top View)
2:
3:
4:
(Top View)
Pad 1
Keep
Out *
Area
1
2
Dimensional Tolerance:
2
1
0.224
(5.7mm)
± ±..0 (±127mm)
± ±.2 (±0.8mm)
.±.34
(Bottom View)
(.±9.mm)
(4 Places)
4
3
.±.00
(1±4.mm)
(4 Places)
Bulletin
Tx350
4 of 6
A02
26 Apr 2012
Page
Revision
Date
Specifications subject to change without notice. All dimensions in inches. © Copyright 2011 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
TVB Series Design Recommendations
TB Series Design Recommendations
Vcc, should have
0.010”(0.254mm)
Recommended
clearance
Vcc, should have
a large copper
area for reduced
inductance.
a large copper
area for reduced
inductance.
50 Ohm trace
<1”by design
Vcc
0.010”(0.254mm)
Recommended
clearance
50 Ohm trace
<1”by design
Vcc
Connect a 0.01uF
bypass capacitor
<0.1”(2.54mm)
from the pad.
inductance
for internal
copper flood.
Connect a 0.01uF
bypass capacitor
<0.1”(2.54mm)
from the pad.
inductance
for internal
copper flood.
4
3
Buffer
8
1
6
3
5
9
Buffer
Ground
1
4
10
Ground
Ground,
should have
2
Ground,
should have
Ground
Top View
Top View
a large copper
area for reduced
inductance.
Ground
Top View
Top View
a large copper
area for reduced
inductance.
50 Ohm Trace
Without
Vias
50 Ohm Trace
Without
Vias
OSC
Output
Buffer
OSC
Output
Buffer
TOP LAYER
TOP LAYER
GROUND LAYER
GROUND LAYER
BOTTOM LAYER
BOTTOM LAYER
TB Series
LVCMOS Test Circuit
TVB Series
LVCMOS Test Circuit
LVCMOS Output Waveform
Enable/
Disable
DNC
DNC
Vcc
Supply
Voltage
Output
3
4
Vcc
Supply
Voltage
8
7
6
Ground
9
5
4
Output
1
2
Ground
15 pF
10
2
3
1
0.1 uF
Bypass
10 nF
Bypass
TCXO = N/C
VCTCXO = Vc
15 pF
0.1 uF
Bypass
10 nF
Bypass
DNC DNC
TCXO =
VCTCXO
N/C
Vc
DNC
=
DNC
= Do Not Connect
TB Series
Clipped Sinewave
TVB Series
Clipped Sinewave
Clipped Sinewave
Output Waveform
Test Circuit
Test Circuit
Enable/
Disable
DNC
DNC
Vcc
Supply
Voltage
3
Output
4
Vcc
Supply
Voltage
8
7
6
9
5
4
Output
Ground
1
2
0
Ground
10K
Ohm
10
10 pF
2
3
1
10K
Ohm
0.1 uF
Bypass
10 nF
Bypass
TCXO =
VCTCXO
N/C
Vc
10 pF
=
0.1 uF
Bypass
10 nF
Bypass
DNC DNC
TCXO =
VCTCXO
N/C
Vc
DNC
=
DNC
= Do Not Connect
200 mV/Div
Bulletin
Tx380
5 of 6
00
Page
Revision
Date
23 Oct 2012
Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Phase Noise Information
Model TVB504-010.0MHz
Solder Profile
Temperature
260°C
260°C
220°C
180°C
150°C
120°C
0
10 s
Up to 120 s
Typical
60 to 90 s
Typical
Meets IPC/JEDEC J-STD-020C
5x7mm Tape and Reel Information
1
Revision History
Data sheet released 10/23/12
Bulletin
Tx380
6 of 6
Revision 00
Page
Revision
00
Date
23 Oct 2012
Specifications subject to change without notice. All dimensions in inches. © Copyright 2012 The Connor-Winfield Corporation
相关型号:
©2020 ICPDF网 联系我们和版权申明