TC6E-019.2M [CONNOR-WINFIELD]
HCMOS Output Clock Oscillator, 19.2MHz Nom, ROHS COMPLIANT, MINIATURE, CERAMIC, SMD, 10 PIN;型号: | TC6E-019.2M |
厂家: | CONNOR-WINFIELD CORPORATION |
描述: | HCMOS Output Clock Oscillator, 19.2MHz Nom, ROHS COMPLIANT, MINIATURE, CERAMIC, SMD, 10 PIN 机械 振荡器 |
文件: | 总4页 (文件大小:204K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
High
Precision
TCXO / VCTCXO
Description
Features:
3.3V or 5.0V Operation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630- 851- 5040
The Connor-Winfield
CMOS or Clipped Sinewave Output Logic
Miniature 5x7mm Surface Mount Package
Frequency Stabilities Available:
Tx5C / Tx6C Series: 0.25ppm
5.0x7.0mm Temperature
Compensated Crystal
Controlled Oscillators
www.conwin.com
and Voltage Controlled Temperature
Compensated Crystal Controlled Oscillators
are designed for use inapplications requiring
tight frequency stability in a small package.
Through the use of Analog Temperature
Compensation, this device is capable of
holding sub 1-ppm stabilities over the
commercial or the industrial temperature
ranges.
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Tx5E / Tx6E Series: 0.50ppm
Tx5F / Tx6F Series: 1.00ppm
Temperature Ranges Available:
Tx5x Series: 0 to 70°C
Tx6x Series: -40 to 85°C
Low Jitter <1pS RMS
Tri-State Enable/Disable Function
Tape and Reel Packaging
RoHS Compliant / Lead Free
Recommended for new designs
Applications
GPS Receivers
Instrumentation
Femtocells
FTTH, FTTC
Pin Connections
Package Layout
0.079 Max.
0.276 0.006
(2.0mm)
(7.0mm)
1
2
3
4
5
6
7
8
9
10
Do not connect
Do not connect
Do not connect
Ground
0.197
TA5C 0715
0.006
(5.0mm)
20.0MHz
0.025(6 Places)
(0.635mm)
Pin 1
Output
0.040
(1.02mm)
(6 Places)
Do not connect
Do not connect
Tri-state Enable / Disable
Supply, Vcc
1
8
2
3
10
9
4
0.030
(0.762mm)
(4 Places)
0.100
(2.54mm)
Bottom
View
5
Voltage Control (VCTCXO)
N/C (TCXO)
6
7
Dimensional Tolerance:
.005 (.127mm)
.02 (.508mm)
0.038
(0.965mm)
(4 Places)
0.100
(2.54mm)
Standard Frequencies Available *
6.4 MHz 9.72 MHz 10.0 MHz 10.24 MHz 12.5 Mhz 12.8 MHz 13.5 MHz 19.2 MHz
19.44 MHz 20.0 MHz 20.48 MHz 25 MHz 27 MHz 38.88 MHz
* Available frequencies from the factory for small quantity orders or quick delivery. Additional frequencies are available.
Ordering Information
020.0M
-
T
A
5
C
Type:
Precision
TCXO
VCTCXO
5x7mm
Temperature Range:
5 = 0 to 70° C
6 = -40 to 85° C
Features:
Frequency Stability:
C = +/-0.25 ppm
E = +/- 0.50 ppm
F = +/- 1.00 ppm
Output Frequency:
Frequency Format
-xxx.xM Min.*
-xxx.xxxxxxM Max.*
*Amount of numbers
after the decimal point.
M = MHz
A = TCXO, LVCMOS, 3.3Vdc.
B = TCXO, Clipped Sinewave, 3.3Vdc.
C = TCXO, HCMOS, 5.0Vdc.
D = TCXO, Clipped Sinewave, 5.0Vdc.
E = VCTCXO, LVCMOS, 3.3Vdc.
F = VCTCXO, Clipped Sinewave, 3.3Vdc.
G = VCTCXO, HCMOS, 5.0Vdc.
Bulletin
Tx180
H = VCTCXO, Clipped Sinewave, 5.0Vdc.
Page
1 of 4
07
To order an TA5C with an output frequency of:
6.4 MHz = TA5C-006.4M
10 MHz = TA5C-010.0M
Example:
TA5C-020.0M = 5x7mm, TCXO, LVCMOS,
3.3Vdc, 0 to 70C, +/-0.25ppm, Output Frequency 20.0MHz
Revision
Date
38.88 MHz = TA5C-038.88M
28 Aug 2009
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Model Specifications
0ꢀ2ꢁppm Model Specifications
Table 1.0
Model Number
TA5C
TB5C
TE5C
TF5C
TC5C
TD5C
TG5C
TH5C
LVCMOS
Clipped
Sinewave
LVCMOS
Clipped
Sinewave
HCMOS
Clipped
Sinewave
HCMOS
Clipped
Sinewave
Output Type
TCXO / VCTCXO
Supply Voltage
TCXO
3.3Vdc
TCXO
3.3Vdc
VCTCXO
3.3Vdc
VCTCXO
3.3Vdc
6.4 to 40 MHz
TCXO
5.0Vdc
TCXO
5.0Vdc
VCTCXO
5.0Vdc
VCTCXO
5.0Vdc
Frequency Range
Frequency Stability
Temperature Range
Features
0.25ppm (Note 1)
0 to 70°C
Table 2.0
TH6C
TCXO or VCTCXO
3.3V or 5.0V Operation
CMOS Output or
Clipped Sinewave Output
Frequency Stability:
Tx5C/Tx6C - Series 0.25ppm
Tx5E/Tx6E - Series 0.50ppm
Tx5F/Tx6F - Series 1.00ppm
Temperature Range:
Model Number
TA6C
TB6C
TE6C
TF6C
TC6C
TD6C
TG6C
LVCMOS
Clipped
Sinewave
LVCMOS
Clipped
Sinewave
HCMOS
Clipped
Sinewave
HCMOS
Clipped
Sinewave
Output Type
TCXO / VCTCXO
Supply Voltage
TCXO
3.3Vdc
TCXO
3.3Vdc
VCTCXO
3.3Vdc
VCTCXO
3.3Vdc
6.4 to40 MHz
TCXO
5.0Vdc
TCXO
5.0Vdc
VCTCXO
5.0Vdc
VCTCXO
5.0Vdc
Frequency Range
Frequency Stability
Temperature Range
0.25ppm (Note 1)
-40 to 85°C
Table 3.0
TH5E
0ꢀꢁ0ppm Model Specifications
Tx5x-Series 0 to 70°C
Tx6xx-Series -40 to 85°C
Low Jitter <1pS RMS
Tri-State Enable/Disable
Surface Mount Package
Tape and Reel Packing
RoHS Compliant / Lead Free
Model Number
TA5E
TB5E
TE5E
TF5E
TC5E
TD5E
TG5E
LVCMOS
Clipped
Sinewave
LVCMOS
Clipped
Sinewave
HCMOS
Clipped
Sinewave
HCMOS
Clipped
Sinewave
Output Type
TCXO / VCTCXO
Supply Voltage
TCXO
3.3Vdc
TCXO
3.3Vdc
VCTCXO
3.3Vdc
VCTCXO
3.3Vdc
6.4 to 40 MHz
TCXO
5.0Vdc
TCXO
5.0Vdc
VCTCXO
5.0Vdc
VCTCXO
5.0Vdc
Frequency Range
Frequency Stability
Temperature Range
0.50ppm (Note 1)
0 to 70°C
Table 4.0
TH6E
Model Number
TA6E
TB6E
TE6E
TF6E
TC6E
TD6E
TG6E
LVCMOS
Clipped
Sinewave
LVCMOS
Clipped
Sinewave
HCMOS
Clipped
Sinewave
HCMOS
Clipped
Sinewave
Output Type
CMOS Test Circuit
TCXO / VCTCXO
Supply Voltage
TCXO
TCXO
VCTCXO
3.3Vdc
VCTCXO
3.3Vdc
6.4 to 40 MHz
TCXO
TCXO
VCTCXO
5.0Vdc
VCTCXO
5.0Vdc
DNC
DNC
E/D
3.3Vdc
3.3Vdc
5.0Vdc
5.0Vdc
Frequency Range
Frequency Stability
Temperature Range
6
8
7
0.50ppm (Note 1)
-40 to 85°C
Vcc
9
Output
5
4
Supply
Voltage
10
DNC
Table 5.0
TH5F
.01 uF
15 pF**
1
2
3
1ꢀ00ppm Model Specifications
Bypass
Model Number
TA5F
TB5F
TE5F
TF5F
TC5F
TD5F
TG5F
DNC
DNC DNC
LVCMOS
Clipped
Sinewave
LVCMOS
Clipped
Sinewave
HCMOS
Clipped
Sinewave
HCMOS
Clipped
Sinewave
Output Type
DNC = Do Not Connect
E/D = Enable / Disable
** NPO Grade component
TCXO / VCTCXO
Supply Voltage
TCXO
3.3Vdc
TCXO
3.3Vdc
VCTCXO
3.3Vdc
VCTCXO
3.3Vdc
6.4 to 52 MHz
TCXO
5.0Vdc
TCXO
5.0Vdc
VCTCXO
5.0Vdc
VCTCXO
5.0Vdc
Frequency Range
Frequency Stability
Temperature Range
Clipped Sinewave Test Circuit
1.00ppm (Note 1)
0 to 70°C
DNC
DNC
E/D
Table 6.0
TH6F
Model Number
TA6F
TB6F
TE6F
TF6F
TC6F
TD6F
TG6F
8
7
6
LVCMOS
Clipped
Sinewave
LVCMOS
Clipped
Sinewave
HCMOS
Clipped
Sinewave
HCMOS
Clipped
Sinewave
Output Type
Vcc
9
Output
5
4
Supply
Voltage
10Kohm
10
TCXO / VCTCXO
Supply Voltage
TCXO
3.3Vdc
TCXO
3.3Vdc
VCTCXO
3.3Vdc
VCTCXO
3.3Vdc
TCXO
5.0Vdc
TCXO
5.0Vdc
VCTCXO
5.0Vdc
VCTCXO
5.0Vdc
DNC
.01 uF
10 pF**
1
2
3
Bypass
Frequency Range
Frequency Stability
Temperature Range
6.4 to 52 MHz
1.00ppm (Note 1)
-40 to 85°C
DNC
DNC DNC
DNC = Do Not Connect
E/D = Enable / Disable
** NPO Grade component
Note: 1) Frequency stability vs. change in temperature. [ (Fmax – Fmin)/2.Fo].
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Bulletin
Page
Tx180
2 of 4
07
Revision
Date
28 Augr 2009
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Electrical Specifications for all Models
ABSOLUTE MAXIMUM RATINGS
TABLE 7.0
NOTE
PARAMETER
UNITS
MINIMUM NOMINAL MAXIMUM
UNITS
°C
Storage Temperature
Supply Voltage
-55
-0.5
-0.5
-
-
-
125
6.0
(Vcc)
Vdc
Vdc
Input Voltage
Vcc+0.6
Operating Specifications
Parameter
Minimum
Nominal
Maximum
1.00
0.2
UNITS
ppm
Notes
TCXO Frequency Calibration @ 25°C
Supply Voltage Variation. (Vcc 5%)
Load Coefficient, 5%
Static Temperature Hysteresis
Aging
-1.00
-
1
-0.2
-
ppm
-0.2
-
0.2
ppm
-0.4
-
-
0.4
ppm
2
Features
-1.00
1.00
1.00
3.465
5.25
10
ppm / year
ppm
Frequency shift after reflow soldering
Supply Voltage
-1.00
-
TCXO or VCTCXO
3.3V or 5.0V Operation
CMOS Output or
Clipped Sinewave Output
Frequency Stability:
Tx5C/Tx6C - Series 0.25ppm
Tx5E/Tx6E - Series 0.50ppm
Tx5F/Tx6F - Series 1.00ppm
Temperature Range:
(Vcc)
(Vcc)
(Icc)
3.135
3.3
5.0
6
Vdc
3
3
4.75
Vdc
Supply Current
-
-
-
-
-
-
-
-
-
mA
Jitter (BW=10Hz to 20MHz)
Jitter (BW=12kHz to 20MHz)
SSB Phase Noise at 10Hz offset
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
SSB Phase Noise at 10KHz offset
SSB Phase Noise at >100KHz offset
Startup Time
-
5
ps rms
ps rms
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ms
-
1
-80
-110
-135
-150
-150
-
-70
-100
-130
-145
-150
10
Tx5x-Series 0 to 70°C
Tx6xx-Series -40 to 85°C
Low Jitter <1pS RMS
Input Characteristics for Enable / Disable Function (Pin 8)
Tri-State Enable/Disable
Surface Mount Package
Tape and Reel Packing
RoHS Compliant / Lead Free
Parameter
Minimum
70% Vcc
-
Nominal
Maximum
-
Units
Vdc
Notes
Enable Voltage (High) or open circuit
Disable Voltage (Low) Output Tri-stated
(Vih)
(Vil)
-
-
4
30% Vcc
Vdc
Input Characteristics for Voltage Control (Pin10)
Parameter
Minimum
Nominal
Maximum
Units
Vdc
Vdc
ppm
%
Notes
Control Voltage Range
(Vcc = 3.3V)
(Vcc = 5.0V)
(Vc)
(Vc)
0.30
0.50
10
1.65
3.00
2.50
4.50
Frequency Tuning measured @25°C
Linearity
-
-
-
-
5
CMOS Test Circuit
5
DNC
DNC
E/D
Slope
Positive
100K
Input Impedance
-
-
Ohms
8
7
6
CMOS Output Characteristics
Vcc
9
Output
5
4
Supply
Voltage
Parameter
Minimum
Nominal
Maximum
Units
pF
Notes
10
DNC
LOAD
-
15
-
6
.01 uF
15 pF**
1
2
3
Bypass
Voltage
(High)
(Low)
(High)
(Low)
(Voh)
(Vol)
(Ioh)
(Iol)
90%Vcc
-
-
-
Vdc
Vdc
mA
mA
%
-
-
10%Vcc
DNC
DNC DNC
Current
-
-4
-
DNC = Do Not Connect
E/D = Enable / Disable
4
45
-
-
** NPO Grade component
Duty Cycle at 50% of Vcc
50
-
55
8
Rise / Fall Time 10% to 90%
ns
Clipped Sinewave Test Circuit
Clipped Sinewave Output Characteristics
DNC
DNC
E/D
Parameter
Minimum
Nominal
Maximum
Units
Notes
Load
7
8
7
6
Output Load Resistance
Output Load Capacitance
Output Voltage (< 30 MHz)
Output Voltage (> 30 MHz)
-
10K
-
-
-
-
Ohms
pF
Vcc
9
Output
5
4
-
10
-
Supply
Voltage
10Kohm
1.00
0.80
V pk-pk
V pk-pk
10
DNC
.01 uF
-
10 pF**
1
2
3
Bypass
1) TCXO: Initial calibration @ 25°C. Specifications at time of shipment after 48
hours of operation.
DNC
DNC DNC
2) Frequency change after reciprocal temperature ramped over the operating
range. Frequency measured before and after at 25°C.
DNC = Do Not Connect
E/D = Enable / Disable
** NPO Grade component
3) For best in application performance, careful selection of an external power
source is critical. Select an external regulator that meets or exceeds to following
specifications regarding voltage regulation tolerance, initial accuracy,
temperature coefficient, voltage noise, and low voltage noise density.
Factory Test Conditions: Initial Accuracy 2mv, Noise (0.1Hz to 10 KHz) 15uV
p-p, Voltage Noise Density = 50nV/sqrt Hz, Temperature Coefficient < 5ppm/°C.
4) Leave Pad 8 unconnected if enable / disable function is not required. When tri-
stated, the output stage is disabled but the oscillator and compensation circuit
are still active (current consumption < 1 mA).
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
5) Additional pull ranges are available; please contact the factory for additional
information.
6) Attention: To achieve the frequency stability specified it is required that the
circuit connected to this TCXO output must have the equivalent input
capacitance that is specified by the nominal load capacitance.
7) Output is AC coupled.
Bulletin
Page
Tx180
3 of 4
Revision
Date
07
28 Augr 2009
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Package Characteristics
Design Recommendations
Table 13.0
Package
Ceramic Surface Mount Package.
Vcc, should have
a large copper
area for reduced
Environmental Characteristics
0.010”(0.254mm)
Recommended
clearance
50 Ohm trace
<1”by design
Table 14.0
Vcc
inductance.
Connect a 0.01uF
bypass capacitor
<0.1”(2.54mm)
from the pad.
Vibration:
Shock:
Soldering:
Vibration per Mil Std 883E Method 2007.3 Test Condition A
Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.
SMD product suitable for Convection Reflow soldering. Peak
temperature 260°C. Maximum time above 220°C, 60 seconds.
Solderability per Mil Std 883E Method 2003
inductance
for internal
copper flood.
8
1
6
3
5
9
Buffer
Solderability
4
10
Ground
Ground,
should have
Suggested Pad Layout
Ground
Top View
Top View
a large copper
area for reduced
inductance.
0.295
(7.49mm)
0.051
(1.28mm)
0.030
(0.76mm)
50 Ohm Trace
Without
Vias
OSC
Output
Buffer
0.037
(0.94mm)
TOP LAYER
Keep Out Area
Top View
GROUND LAYER
0.215
(5.46mm)
0.051
(1.28mm)
1
BOTTOM LAYER
Dimensional Tolerance:
.005 (.127mm)
.02 (.508mm)
Typical Phase Noise
Solder Profile
Model TA5C-020.0MHz
Temperature
260°C
260°C
220°C
180°C
150°C
120°C
0
Time
120 S
10 S
Max.
60 S
Max.
360 Sec. Max.
LVCMOS Output Waveform
90%
50%
10%
Tape and Reel Specifications
Clipped Sinewave Output Waveform
0
1
200 mV/Div
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Bulletin
Page
Tx180
4 of 4
Revision
Date
07
28 Aug 2009
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
相关型号:
TC6E-10MHZ
HCMOS Output Clock Oscillator, 10MHz Nom, ROHS COMPLIANT, CERAMIC PACKAGE-10
CONNOR-WINFIE
TC6E-12.8MHZ
HCMOS Output Clock Oscillator, 12.8MHz Nom, ROHS COMPLIANT, CERAMIC PACKAGE-10
CONNOR-WINFIE
TC6E-20MHZ
HCMOS Output Clock Oscillator, 20MHz Nom, ROHS COMPLIANT, CERAMIC PACKAGE-10
CONNOR-WINFIE
TC6E-6.4MHZ
HCMOS Output Clock Oscillator, 6.4MHz Nom, ROHS COMPLIANT, CERAMIC PACKAGE-10
CONNOR-WINFIE
TC6E-9.72MHZ
HCMOS Output Clock Oscillator, 9.72MHz Nom, ROHS COMPLIANT, CERAMIC PACKAGE-10
CONNOR-WINFIE
TC6E-FREQ
HCMOS Output Clock Oscillator, 6.4MHz Min, 40MHz Max, ROHS COMPLIANT, MINIATURE, CERAMIC, SMD, 10 PIN
CONNOR-WINFIE
TC6F-006.4M
HCMOS Output Clock Oscillator, 6.4MHz Nom, ROHS COMPLIANT, MINIATURE, CERAMIC, SMD, 10 PIN
CONNOR-WINFIE
TC6F-009.72M
HCMOS Output Clock Oscillator, 9.72MHz Nom, ROHS COMPLIANT, MINIATURE, CERAMIC, SMD, 10 PIN
CONNOR-WINFIE
TC6F-010.0M
HCMOS Output Clock Oscillator, 10MHz Nom, ROHS COMPLIANT, MINIATURE, CERAMIC, SMD, 10 PIN
CONNOR-WINFIE
TC6F-010.24M
HCMOS Output Clock Oscillator, 10.24MHz Nom, ROHS COMPLIANT, MINIATURE, CERAMIC, SMD, 10 PIN
CONNOR-WINFIE
TC6F-012.5M
HCMOS Output Clock Oscillator, 12.5MHz Nom, ROHS COMPLIANT, MINIATURE, CERAMIC, SMD, 10 PIN
CONNOR-WINFIE
©2020 ICPDF网 联系我们和版权申明