TV333-025.0M [CONNOR-WINFIELD]
Clipped Sine Output Oscillator;型号: | TV333-025.0M |
厂家: | CONNOR-WINFIELD CORPORATION |
描述: | Clipped Sine Output Oscillator |
文件: | 总6页 (文件大小:1505K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Available at Digi-Key**
www.digikey.com
Telecom Performance
5x7mm
TCXO / VCTCXO
T / TV Series
Features:
Description:
Connor-Winfield's Txxx
and TVxxx series are
5x7mm TCXO and
VCTCXO products with
exceptional frequency
stability and low phase
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
• Frequency Stabilities Available:
+/-±.ꢀ2 ppm (ꢁ.4 to 5± MHz)
+/-±.5± ppm (ꢁ.4 to 5± MHz)
+/-1.±± ppm or +/-ꢀ.±± ppm (ꢁ.4 to 54 MHz)
• Temperature Ranges Available:
± to 25°C, ± to 7±°C, -4± to 25°C or
-ꢀ± to 7±°C Packages Available:
www.conwin.com
• T - Series: 5 x 7mm - 1± Pad
• TV - Series: 5 x 7mm - 4 Pad
• 3.3 Vdc Operation
• Output Logic: LVCMOS or Clipped Sinewave
• Fixed Frequency - TCXO
• Voltage Controlled - VCTCXO
• Low Jitter <±.5± ps RMS
• Low Phase Noise
US Headquarters:
630-851-4722
noise. Through the use
of analog temperature
European Headquarters:
+353-61-472221
compensation, these products are capable
of holding Stratum 3 level temperature
stabilities of ±±.ꢀ2 ppm over the commercial
and industrial temperature ranges. Available
in 4-pad or 1±-pad surface mount footprints.
These products are designed for
such applications as IEEE 1522 PTP and
Synchronous Ethernet.
• Tri-State Enable/Disable: (T Model Series Only)
• Tape and Reel Packaging
• RoHS Compliant / Lead Free
All models will meet ±4.ꢁ ppm accuracies
for twenty years
Applications:
• IEEE 1522 Applications
• Synchronous Ethernet slave clocks, ITU-T G.2ꢀꢁꢀ EEC options 1 & ꢀ
• Compliant to Stratum 3, GR-1ꢀ44-CORE & GR-ꢀ53-CORE
• Wireless Communications
• Small Cells
• Test and Measurement
• GPS
Standard Frequencies Available *
* ꢁ.4, 9.7ꢀ, 1±, 1±.ꢀ4, 1ꢀ.5, 1ꢀ.2, 13.5, 19.ꢀ, 19.44, ꢀ±, ꢀ±.42, ꢀ5, ꢀ7, 32.22, 4± MHz
Available frequencies from the factory for small quantity orders or quick delivery.
Additional frequencies are available.
** Not all
Models
available at
Digi-Key
Ordering Information
5
±
- ±1±.±M
TV
4
Frequency
Stability
Features
Temperature
Range
Output Frequency
Type / Package
TCXO / VCTCXO
Series
Frequency Format
-xxx.xM Min
-xxx.xxxxxxM Max
*Amount of numbers after
the decimal point.
M = MHz
ꢀ = TCXO, LVCMOS, 3.3 Vdc
± = ±±.ꢀ2 ppm
1 = ±±.5± ppm
ꢀ = ±1.±± ppm
3 = ±ꢀ.±± ppm
3 = TCXO, Clipped Sinewave, 3.3 Vdc
4 = VCTCXO, LVCMOS, 3.3 Vdc
5 = VCTCXO, Clipped Sinewave, 3.3 Vdc
3 = ± to 25 °C
5 = ± to 7±°C
ꢁ = -4± to 25°C
7 = -ꢀ± to 7±°C
T = 5.±x7.± mm
1± Pads
TV = 5.±x7.± mm
4 Pads
Example: Part Number
TV5±4-±1±.±M = 5x7mm 4 pad package, ±.ꢀ2 ppm, ± to 7±°C, 3.3 Vdc, LVCMOS Output, VCTCXO
T715-±1ꢀ.2M = 5x7mm 1± pad package, ±.5± ppm, -ꢀ± to 7±°C, 3.3 Vdc, Clipped Sinewave Output, VCTCXO
T5ꢀꢀ-±5±.±M = 5x7mm 1± pad package, 1.± ppm, ± to 7±°C, 3.3 Vdc, LVCMOS Output, TCXO
TVꢁ±ꢀ-±1±.±M = 5x7mm 4 pad package, ±.ꢀ2 ppm, -4± to 25°C, 3.3 Vdc, LVCMOS Output, TCXO
Bulletin
Tx176
1 of 6
Page
Revision
21
Date
10 May 2017
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Absolute Maximum Ratings
Parameter
Minimum
-55
Nominal
Maximum
95
6.0
Vcc + 0.5
Units
°C
Vdc
Vdc
Notes
Notes
Storage Temperature
Supply Voltage (Vcc)
Input Voltage
-
-
-
-0.5
-0.5
Operating Specifications
Minimum
Parameter
Nominal
Maximum
Units
Output Frequency (Fo)
Models Tx0x, TVx0x
Models Tx1x, TVx1x
Models Tx2x, TVx2x
Models Tx3x, TVx3x
Operating Temperature Range
Models T3xx, TV3xx
Models T5xx, TV5xx
Models T6xx, TV6xx
Models T7xx, TV7xx
Frequency Calibration @ 25 °C
6.4
6.4
6.4
6.4
-
-
-
-
50
50
54
54
MHz
MHz
MHz
MHz
(See Ordering Information for full part number)
0
0
-40
-20
-1.0
-
-
-
-
-
85
70
85
70
1.0
°C
°C
°C
°C
ppm
1
Frequency Stability (See Ordering Information for full part number) Per STRATUM 3 GR-1244-CORE
Frequency Stability 0.28 ppm is only aꢀailable in tꢁe frequency range of 6.4 to 50 MHz.
Models Tx0x, TVx0x
Holdoꢀer Stability
-0.28
-0.32
-40
-
-
-
0.28
0.32
40
ppm
ppm
ppb
2
3
Constant Temperature Stability
Frequency Stability
Models Tx1x, TVx1x
Models Tx2x, TVx2x
Models Tx3x, TVx3x
Frequency ꢀs. Load Stability
Frequency ꢀs. Voltage Stability
Static Temperature Hysteresis
Freq. sꢁift after reflow soldering
Long Term Stability
Aging
Oꢀer 24 Hrs.
(See Ordering Information for full part number)
-0.50
-1.00
-2.00
-0.05
-0.05
-
-
-
-
-
-
-
-
-
0.50
1.00
2.00
0.05
0.05
0.40
1.0
ppm
ppm
ppm
ppm
ppm
ppm
ppm
ppm
2
2
2
5ꢂ
5ꢂ
4
5
6
-1.0
-1.0
1.0
per Life (20 Years)
per Day
Total Frequency Tolerance
Supply Voltage (Vcc)
Supply Current (Icc) LVCMOS
Clipped Sinewaꢀe
Jitter:
-3.0
-40
-4.6
3.135
-
-
-
-
3.0
40
4.6
3.465
6.0
2.9
ppm
ppb
ppm
Vdc
mA
7
8
3.30
2.1
1.3
-
mA
Period Jitter
-
-
-
3.0
0.3
1.0E-10
5.0
1.0
-
ps RMS
ps RMS
Integrated Pꢁase Jitter (12K to Fo/2)
Allan Deꢀiation (1s)
Typical SSB Pꢁase Noise
For Fo
1±.± MHz
-98
ꢀ5.± MHz
-90
5±.± MHz
-73
@ 10 Hz offset
@ 100 Hz offset
@ 1 KHz offset
@ 10 KHz offset
@ 100 KHz offset
@ 1 MHz offset
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ms
-125
-143
-151
-152
-155
-
-120
-140
-151
-152
-154
-
-103
-134
-151
-152
-154
10
Start-Up Time
Bulletin
Page
Tx176
2 of 6
Revision
Date
21
10 May 2017
Specifications subject to change without notification. See Connor-Winfield's website for latest revision.
© Copyright 2017 The Connor-Winfield Corporation Not intended for life support applications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Control Voltage Input Characteristics
Parameter
Control Voltage
Frequency Pullability
Pull Slope (Vc=1.65V)
Control Voltage Slope
Monotonic Linearity
Input Impedance
Minimum
Nominal
1.65
12
8.00
Maximum
Units
V
ppm
ppm/V
Notes
0.3
10
-
3.0
-
-
Positiꢀe Slope
-
-
-
-
5
-
-
ꢂ
Oꢁm
100K
10
Modulation Bandwidtꢁ (3dB)
KHz
OE Enable /Disable Input Characteristics (Pad 8) T Series only
Parameter
Enable Input Voltage -(Viꢁ)
Disable Input Voltage - (Vil)
Minimum
70ꢂVcc
-
Nominal
Maximum
-
30ꢂVcc
Units
Vdc
Vdc
Notes
9
9
-
-
Function
Low:
Higꢁ or Open:
Output
Disabled (Higꢁ Impedance)
Enabled
LVCMOS Output Characteristics
Parameter
Minimum
Nominal
Maximum
Units
pF
Vdc
Vdc
mA
mA
ꢂ
Notes
10
Load (CL)
-
15
-
-
-
-
50
4
-
Voltage (Higꢁ) (Voꢁ)
90ꢂVcc
-
(Low)
Current (Higꢁ) (Ioꢁ)
(Low) (Iol)
Duty Cycle at 50ꢂ of Vcc
Rise / Fall Time 10ꢂ to 90ꢂ
(Vol)
-
-4
-
45
-
10ꢂVcc
-
4
55
8
ns
Clipped Sinewave Output Characteristics
Parameter
Load (RC)
Minimum
Nominal
Maximum
Units
Notes
11
Output Load Resistance
Output Load Capacitance
OutputVoltage (< 40 MHz)
OutputVoltage (=>40 MHz)
Output Impedance
-
-
10K
10
1.2
1.0
200
-
-
-
-
-
Oꢁm
pF
V
12
1.0
0.8
-
pk-pk
pk-pk
V
Oꢁms
Package Characteristics
Hermetically sealed ceramic package witꢁ grounded metal coꢀer
Package
Environmental Characteristics
Vibration:
Sꢁock:
Vibration per Mil Std 883E Metꢁod 2007.3 Test Condition A.
Mecꢁanical Sꢁock per Mil Std 883E Metꢁod 2002.4 Test Condition B.
Soldering Process: RoHS compliant lead free. See soldering profile on page 6.
Notes:
1. Initial calibration @ 25°C. ± 2°Cꢀ for VCTCXO's Vc = 1.65V. Specifications at time of shipment
2. Frequency stability vs. change in temperature. [± ±FmaꢁxFminꢂ)±2ꢃFo]ꢂ. For VCTCXO's x Vc x= 1.65V
3. Inclusive of frequency stabilityꢀ supply voltage change ±± 1ꢄꢂꢀ agingꢀ for 24 hours. Per STRATUM 3 GRx1244xCORE.
4. Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25°C
5. Two consecutive solder reflows after 1 hour recovery @ 25°C.
6. Frequency drift over 1 year @ 25°C.
7. Inclusive of calibration @ 25°Cꢀ frequency vs. change in temperatureꢀ change in supply voltage ±± 5ꢄꢂꢀ load change ±± 5ꢄꢂꢀ reflow soldering
process and 20 years aging.
8. BW = 12 KHz to 20 MHz
9. Leave Pad 8 on the T Series unconnected if enable ) disable function is not required. When trixstatedꢀ the output stage is disabled but the
oscillator and compensation circuit are still active ±current consumption < 1 mAꢂ.
10. Attention: To achieve optimal frequency stabilityꢀ and in some cases to meet the specification stated on this data sheetꢀ it is required that the
circuit connected to this TCXO output must have the equivalent input capacitance that is specified by the nominal load capacitance. Deviations
from the nominal load capacitance will have a graduated effect on the stability of approꢁimately 20 ppb per pF load difference.
11. Load components are required for proper operation of the device.
Bulletin
Page
Tx176
3 of 6
21
Revision
Date
12. Output is AC coupled.
10 May 2017
Specifications subject to change without notification. See Connor-Winfield's website for latest revision.
© Copyright 2017 The Connor-Winfield Corporation Not intended for life support applications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
T Series
T Series
T Series
Package Outline
Suggested Pad Layout
Pad Connections
0.079 Max.
(2.0mm)
0.276 0.006
(7.0mm)
0.295
(7.49mm)
0.051
1: Do Not Connect
0.030
(0.76mm)
(1.28mm)
Keep Out Area
2: Do Not Connect
3: Do Not Connect
4: Ground
0.197
0.006
(5.0mm)
7
8
6
5
4
9
0.037
(0.94mm)
Top View
0.215
(5.46mm)
5: Output
10
0.051
(1.28mm)
0.025(6 Places)
(0.635mm)
Pin 1
2
6: Do Not Connect
7: Do Not Connect
8: Enable / Disable (OE)
9: Supply Voltage (Vcc
10:VCTCXO: Control Voltage (Vc)
TCXO: N/C
3
1
0.040
(1.02mm)
(6 Places)
1
8
2
3
10
9
4
0.030
(0.762mm)
(4 Places)
0.100
(2.54mm)
Bottom
View
5
6
7
* Do not route any traces in the keep out area. It is
recommended the next layer under the keep out
area is to be ground plane.
Dimensional Tolerance:
.005 (.127mm)
.02 (.508mm)
0.038
(0.965mm)
(4 Places)
0.100
(2.54mm)
T Series
Alternate Package Outline
Marking Information
The following are examples of possible marking configurations
0.095
(2.4mm)
0.276
(7.0mm)
0.006
0.197
0.006
(5.0mm)
Alternate package applies to some frequencies
where a smaller crystal size is used.
The differences are the top view crystal size,
and the overall height.
Bottom view, suggested pad layout, and pad
connections all remain the same as above.
Note: The XXXXX represents crystal lot code information.
TV Series
Package Outline
TV Series
Suggested Pad Layout
TV Series
Pad Connections
0.071
(1.8mm)
4 Places
0.276 0.006
(7.0mm)
0.079 Max.
(2.0mm)
1:
VCTCXO: Voltage Control (Vc)
TCXO: N/C
Ground
Output
Supply (Vcc)
4
3
2:
3:
4:
0.197
0.006
(5.0mm)
0.047
(1.2mm)
4 Places
0.165
(4.2mm)
(Top View)
(Top View)
Keep
Out *
Area
Pad 1
1
2
2
1
0.224
(5.7mm)
Dimensional Tolerance:
.005 (.127mm)
.02 (.508mm)
0.034
(0.90mm)
(4 Places)
(Bottom View)
Bulletin
Tx176
4 of 6
21
* Do not route any traces in the keep out area. It is
recommended the next layer under the keep out
area is to be ground plane.
Page
4
3
0.055
(1.40mm)
(4 Places)
Revision
Date
10 May 2017
Specifications subject to change without notification. See Connor-Winfield's website for latest revision.
© Copyright 2017 The Connor-Winfield Corporation Not intended for life support applications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
T Series Design Recommendations
TV Series Design Recommendations
Vcc, should have
a large copper
area for reduced
inductance.
0.010”(0.254mm)
Recommended
clearance
Vcc, should have
a large copper
area for reduced
inductance.
50 Ohm trace
<1”by design
Vcc
0.010”(0.254mm)
Recommended
clearance
50 Ohm trace
<1”by design
Vcc
Connect a 0.01uF
bypass capacitor
<0.1”(2.54mm)
from the pad.
inductance
for internal
copper flood.
Connect a 0.01uF
bypass capacitor
<0.1”(2.54mm)
from the pad.
inductance
4
3
Buffer
8
1
6
for internal
5
9
Buffer
copper flood.
Ground
1
4
10
Ground
Ground,
should have
3
2
Ground,
Ground
Top View
should have
a large copper
area for reduced
inductance.
Top View
a large copper
area for reduced
inductance.
Ground
Top View
Top View
50 Ohm Trace
Without
Vias
50 Ohm Trace
Without
Vias
OSC
Output
Buffer
OSC
Output
Buffer
TOP LAYER
TOP LAYER
GROUND LAYER
GROUND LAYER
BOTTOM LAYER
BOTTOM LAYER
T Series
LVCMOS Test Circuit
Enable/
DNC
DNC
Disable
TV Series
LVCMOS Test Circuit
LVCMOS Output Waveform
Vcc
Supply
Voltage
Output
3
4
Vcc
Supply
Voltage
8
7
6
9
5
4
Output
Ground
1
2
Ground
10
15 pF
2
3
1
0.1 uF
Bypass
10 nF
Bypass
TCXO = N/C
VCTCXO = Vc
15 pF
0.1 uF
Bypass
10 nF
Bypass
DNC DNC
TCXO = N/C
VCTCXO = Vc
DNC
DNC
= Do Not Connect
1V/Div
T Series
Clipped Sinewave Test Circuit
Enable/
DNC
DNC
Disable
TV Series
Clipped Sinewave Test Circuit
Clipped Sinewave
Output Waveform
Vcc
Supply
Voltage
8
7
6
Vcc
Supply
Voltage
9
5
4
Output
3
Output
4
Ground
Ground
1
2
10
0
2
3
1
10K
Ohm
10K
Ohm
10 pF
10 pF
0.1 uF
Bypass
10 nF
Bypass
0.1 uF
Bypass
10 nF
Bypass
TCXO =
VCTCXO
N/C
= Vc
DNC DNC
TCXO =
VCTCXO
N/C
Vc
DNC
=
DNC
= Do Not Connect
200 mV/Div
Note: The clipped sinewave output is AC coupled
Bulletin
Tx176
5 of 6
Page
Revision
21
Date
10 May 2017
Specifications subject to change without notification. See Connor-Winfield's website for latest revision.
© Copyright 2017 The Connor-Winfield Corporation Not intended for life support applications.
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Phase Noise Information
TIE
Model TV504-010.0MHz
TV504-010.0M: WANDER GENERATION IN A STRATUM 3 PLL AT 0.098 Hz BANDWIDTH
MTIE
TDEV
TV504-010.0M: MTIE per GR-253-CORE
TV504-010.0M: TDEV per GR-253-CORE
5x7mm Tape and Reel Information
Solder Profile
Temperature
260°C
260°C
220°C
180°C
150°C
120°C
1
0
10 s
Up to 120 s
60 to 90 s
Typical
Typical
Meets IPC/JEDEC J-STD-020C
Revision History
Revision
Date
Action
17
18
19
20
21
02/11/14
09/15/14
04/01/15
07/27/16
05/10/17
Updated specifications and combined tꢁe T and TV series data sꢁeets.
Added Alternate Package Outline
Bulletin
Page
Tx176
6 of 6
Updated Frequency Stabilities
Extended operating frequency range, and updated standard frequency list
Added marking ꢀariations
Revision
Date
21
10 May 2017
Specifications subject to change without notification. See Connor-Winfield's website for latest revision.
© Copyright 2017 The Connor-Winfield Corporation Not intended for life support applications.
相关型号:
TV335-012.5M
Clipped Sine Output OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
TV35G
Channel style heat sink with folded back finsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AAVID
TV40G
Channel style heat sink with folded back finsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AAVID
TV46C100BT-60.000MHZ
TCVCXO, Clock, 10MHz Min, 60MHz Max, 60MHz NomWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PLETRONICS
TV46C150AS-60.0M
OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PLETRONICS
TV46G
Channel style heat sink with folded back finsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
AAVID
TV46H010AQ-60.0M
OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PLETRONICS
TV46H010AQ-FREQ
HCMOS/TTL Output Clock Oscillator, 10MHz Min, 60MHz Max, METAL PACKAGE-14/4Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PLETRONICS
TV46H010AR-FREQ
HCMOS/TTL Output Clock Oscillator, 10MHz Min, 60MHz Max, METAL PACKAGE-14/4Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PLETRONICS
TV46H010AS-60.0M
OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PLETRONICS
TV46H010AT-10.0M
OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PLETRONICS
TV46H010BQ-FREQ
HCMOS/TTL Output Clock Oscillator, 10MHz Min, 60MHz Max, METAL PACKAGE-14/4Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PLETRONICS
©2020 ICPDF网 联系我们和版权申明