TV602-FREQ [CONNOR-WINFIELD]
LVCMOS Output Clock Oscillator, 6.4MHz Min, 40MHz Max, ROHS COMPLIANT, MINIATURE, CERAMIC PACKAGE-10;型号: | TV602-FREQ |
厂家: | CONNOR-WINFIELD CORPORATION |
描述: | LVCMOS Output Clock Oscillator, 6.4MHz Min, 40MHz Max, ROHS COMPLIANT, MINIATURE, CERAMIC PACKAGE-10 机械 电视 振荡器 |
文件: | 总4页 (文件大小:178K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Telecom
Performance
TCXO / VCTCXO
Description
Features:
Miniature 5.0 x7.0mm Surface Mount Package
3.3V Operation
LVCMOS or Clipped Sinewave Output Logic
Frequency Stabilities Available:
TV50x / TV60x: +/-0.28ppm
TV51x / TV61x: +/-0.50ppm
TV52x / TV62x: +/-1.00ppm
Temperature Ranges Available:
TV5xx Series: 0 to 70°C
TV6xx Series: -40 to 85°C
Frequency Tolerance: +/-4.60ppm for 20 yrs.
Low Jitter <1pS RMS
Tape and Reel Packaging
RoHS Compliant / Lead Free
Recommended for New Designs
Matches Vectron’s VTC1-Series Footprint
The Connor-Winfield
5.0x7.0mm Temperature
Compensated Crystal
Controlled Oscillators and
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630- 851- 5040
Voltage Controlled Temperature
Compensated Crystal Controlled
Oscillators are designed for use in S3
Telecom Applications. Through the use of
Analog Temperature Compensation, this
device is capable of holding sub 1-ppm
stabilities over the commercial or the
industrial temperature ranges. All models
meet +/-4.6ppm accuracies for twenty
years.
www.conwin.com
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Applications
STRATUM 3 Applications
Timing Reference
Package Layout
Pad Connections
0.276 0.006
(7.0mm)
0.079 Max.
(2.0mm)
(Top View)
0.197
0.006
(5.0mm)
1
2
3
4
Control Voltage or N/C
Ground
Output
TV504 0808
19.2MHZ
Pad 1
Supply Voltage (Vcc)
1
2
Dimensional Tolerance:
.005 (.127mm)
.02 (.508mm)
0.033
(0.84mm)
(4 Places)
(Bottom View)
3
4
0.055
(1.40mm)
(4 Places)
Standard Frequencies Available *
6.4 MHz 9.72 MHz 10.0 MHz 10.24 MHz 12.5 Mhz 12.8 MHz
13.5 MHz 19.44 MHz 20.0 MHz 20.48 MHz 25 MHz 27 MHz 38.88 MHz
* Available frequencies from the factory for small quantity orders or quick delivery. Additional frequencies are available.
Ordering Information
Ta b l e 1 . 0
TV
5
019.2M
0
-
4
Type:
Precision
TCXO
VCTCXO
5x7mm
4 Pads
Temperature Range: Frequency Stability:
Output Frequency:
Frequency Format
-xxx.xM Min.*
-xxx.xxxxxxM Max.*
*Amount of numbers
after the decimal point.
M = MHz
Features:
2 = TCXO, LVCMOS, 3.3Vdc.
3 = TCXO, Clipped Sinewave, 3.3Vdc.
4 = VCTCXO, LVCMOS, 3.3Vdc.
5 = VCTCXO, Clipped Sinewave, 3.3Vdc.
5 = 0 to 70° C
6 = -40 to 85° C
0 = +/-0.28 ppm
1 = +/- 0.50 ppm
2 = +/- 1.00 ppm
Example:
TV504-019.2M = 5x7mm, TCXO, LVCMOS,
3.3Vdc, 0 to 70C, +/-0.28ppm, Output Frequency 19.2MHz
Bulletin
Tx215
Page
1 of 4
01
To order an TV504 with an output frequency of:
6.4 MHz = TV504-006.4M
20 MHz = TV504-020.0M
Revision
Date
38.88 MHz = TV504-038.88M
25 Aug 2008
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Absolute Maximum Ratings
Ta b l e 2 . 0
Notes
Parameter
Minimum
-55
Nominal
Maximum
125
Units
°C
Storage Temperature
Supply Voltage (Vcc)
Input Voltage (Vcc)
-
-
-
-0.5
6.0
Vdc
Vdc
-0.5
Vcc+0.6
Features
Model Specifications
Table 3.0
Notes
TCXO
VCTCXO
3.3V Operation
LVCMOS Output
Clipped Sinewave Output
Frequency Stability:
Model Number
Output Type
TV502
LVCMOS
TCXO
TV503
TV504
TV505
Clipped Sinewave
TCXO
LVCMOS
VCTCXO
Clipped Sinewave
VCTCXO
TCXO / VCTCXO
Frequency Range
Frequency Stability
Supply Voltage
6.4 to 40 MHz
0.28ppm
3.3Vdc
1
Temperature Range
Holdover Stability
0 to 70°C
0.32ppm
TV50x/TV60xSeries+/-0.28ppm
TV51x/TV61x-Series+/-0.50ppm
TV52x/TV62x-Series+/-1.00ppm
Temperature Range:
TV5xx-Series 0 to 70°C
TV6xx-Series -40 to 85°C
Low Jitter <1pS RMS
Surface Mount Package
Tape and Reel Packing
RoHS Compliant / Lead Free
Recommended for New Designs
Matches Vectron’s VTC1-Series
Footprint
2
Table 4.0
Notes
Model Number
Output Type
TV602
LVCMOS
TCXO
TV603
TV604
TV605
Clipped Sinewave
VCTCXO
Clipped Sinewave
TCXO
LVCMOS
VCTCXO
TCXO / VCTCXO
Frequency Range
Frequency Stability
Supply Voltage
6.4 to 40 MHz
0.28ppm
3.3Vdc
1
2
Temperature Range
Holdover Stability
-40 to 85°C
0.32ppm
Table 5.0
Notes
Model Number
Output Type
TV512
LVCMOS
TCXO
TV513
TV514
TV515
Clipped Sinewave
VCTCXO
Clipped Sinewave
TCXO
LVCMOS
VCTCXO
TCXO / VCTCXO
Frequency Range
Frequency Stability
Supply Voltage
Temperature Range
LVCMOS Test Circuit
6.4 to 40 MHz
0.50ppm
3.3Vdc
0 to 70°C
1
DNC
DNC
DNC
Vcc
Supply
Voltage
4
Output
3
Table 6.0
Notes
.01 uF
Bypass
15 pF
Model Number
Output Type
TV612
LVCMOS
TCXO
TV613
TV614
TV615
Clipped Sinewave
VCTCXO
2
1
Clipped Sinewave
TCXO
LVCMOS
VCTCXO
N/C - TCXO
VC- VCTCXO
DNC
DNC DNC
TCXO / VCTCXO
Frequency Range
Frequency Stability
Supply Voltage
Temperature Range
6.4 to 40 MHz
0.50ppm
3.3Vdc
-40 to 85°C
1
Clipped Sinewave Test Circuit
Table 7.0
Notes
Model Number
Output Type
TV522
LVCMOS
TCXO
TV523
TV524
TV525
Clipped Sinewave
VCTCXO
DNC
DNC
DNC
Clipped Sinewave
TCXO
LVCMOS
VCTCXO
Vcc
Supply
Voltage
4
Output
3
TCXO / VCTCXO
Frequency Range
Frequency Stability
Supply Voltage
Temperature Range
6.4 to 52 MHz
10Kohm
10 pF
.01 uF
Bypass
1.00ppm
3.3Vdc
0 to 70°C
1
2
1
N/C - TCXO
VC- VCTCXO
DNC
DNC DNC
Table 8.0
Notes
Model Number
Output Type
TV622
LVCMOS
TCXO
TV623
TV624
TV625
Clipped Sinewave
VCTCXO
Clipped Sinewave
TCXO
LVCMOS
VCTCXO
TCXO / VCTCXO
Frequency Range
Frequency Stability
Supply Voltage
Temperature Range
6.4 to 52 MHz
1.00ppm
3.3Vdc
-40 to 85°C
1
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Notes:
1) Frequency stability vs. change in temperature. [ (Fmax – Fmin)/2.Fo].
2) Inclusive of frequency stability, supply voltage change ( 1%), aging, for 24 hours.
Bulletin
Page
Tx215
2 of 4
01
Revision
Date
25 Aug 2008
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Electrical Specifications for all Models
Operating Specifications
Table 9.0
Notes
1
Parameter
Minimum
Nominal
Maximum
1.00
0.2
Units
ppm
TCXO Frequency Calibration @ 25°C
Supply Voltage Variation. (Vcc 5%)
Load Coefficient, 5%
-1.00
-
-
-0.2
ppm
-0.2
-
0.2
ppm
Static Temperature Hysteresis
Total Frequency Tolerance
Supply Voltage
-0.4
-
0.4
ppm
2
3
4
Features
-4.60
-
4.60
3.465
10
ppm
(Vcc)
(Icc)
3.135
3.3
6
Vdc
TCXO
VCTCXO
3.3V Operation
LVCMOS Output
Clipped Sinewave Output
Frequency Stability:
TV50x/TV60xSeries+/-0.28ppm
TV51x/TV61x-Series+/-0.50ppm
TV52x/TV62x-Series+/-1.00ppm
Temperature Range:
TV5xx-Series 0 to 70°C
TV6xx-Series -40 to 85°C
Low Jitter <1pS RMS
Surface Mount Package
Tape and Reel Packing
RoHS Compliant / Lead Free
Recommended for New Designs
Matches Vectron’s VTC1-Series
Footprint
Supply Current
-
-
-
-
-
-
-
-
-
mA
Period Jitter
3
5
ps rms
ps rms
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ms
Integrated Phase Jitter (BW=12kHz to 20MHz)
SSB Phase Noise at 10Hz offset
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
SSB Phase Noise at >10KHz offset
SSB Phase Noise at >100KHz offset
Start Up Time
0.3
-80
-110
-135
-150
-150
-
1.0
-70
-100
-130
-145
-150
10
Input Characteristics For Voltage Control (Pad 1)
Table 10.0
Notes
Parameter
Minimum
0.3
10
Nominal
Maximum
Units
Vdc
ppm
%
Control Voltage Range (Vcc = 3.3V)
(Vc)
1.65
3.0
Frequency Tuning
Linearity
-
-
-
-
5
5
Slope
Positive
LVCMOS Output Characteristics
Table 11.0
Notes
LVCMOS Test Circuit
Parameter
Minimum
Nominal
Maximum
Units
pF
LOAD
-
-
-
15
DNC
DNC
DNC
Voltage
(High)
(Low)
(High)
(Low)
(Voh)
(Vol)
(Ioh)
(Iol)
90%Vcc
-
Vdc
Vdc
mA
mA
%
Vcc
Supply
Voltage
4
Output
3
-
-4
-
-
10%Vcc
Current
-
-
4
.01 uF
Bypass
15 pF
-
2
1
N/C - TCXO
VC- VCTCXO
DNC
DNC DNC
Duty Cycle at 50% of Vcc
45
-
50
-
55
8
Rise / Fall Time 10% to 90%
ns
Clipped Sinewave Output Characteristics
Table 12.0
Notes
6
Parameter
Minimum
Nominal
Maximum
Units
Load
-
-
-
-
-
-
-
Clipped Sinewave Test Circuit
Output Load Resistance
Output Load Capacitance
Output Voltage (< 40 MHz)
Output Voltage (> 40 MHz)
Notes:
10K
Ohms
pF
DNC
DNC
DNC
-
10
-
Vcc
Supply
Voltage
1.00
0.80
V pk-pk
V pk-pk
4
Output
3
-
10Kohm
10 pF
.01 uF
Bypass
2
1
N/C - TCXO
VC- VCTCXO
1) TCXO: Initial calibration @ 25°C. Specifications at time of shipment after 48
hours of operation.
DNC
DNC DNC
2) Frequency change after reciprocal temperature ramped over the operating
range. Frequency measured before and after at 25°C.
3) Inclusive of calibration @ 25°C, frequency vs. change in temperature, change in
supply voltage ( 5%), load change ( 5%), reflow soldering process and 20
years aging.
US Headquarters:
630-851-4722
4) For best in application performance, careful selection of an external power
source is critical. Select an external regulator that meets or exceeds to following
specifications regarding voltage regulation tolerance, initial accuracy,
temperature coefficient, voltage noise, and low voltage noise density.
Factory Test Conditions: Initial Accuracy 2mv, Noise (0.1Hz to 10 KHz) 15uV
p-p, Voltage Noise Density = 50nV/sqrt Hz, Temperature Coefficient < 5ppmºC.
5) Additional pull ranges are available; please contact the factory for additional
information.
European Headquarters:
+353-61-472221
Bulletin
Page
Tx215
3 of 4
01
Revision
Date
25 Aug 2008
6) Output is AC coupled.
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851-4722
Fax: 630-851-5040
www.conwin.com
Package Characteristics
Table 13.0
Table 14.0
Design Recommendations
Package
Ceramic Surface Mount Package.
Vcc, should have
0.010”(0.254mm)
Recommended
clearance
a large copper
area for reduced
inductance.
Environmental Characteristics
50 Ohm trace
<1”by design
Vcc
Vibration:
Shock:
Soldering:
Vibration per Mil Std 883E Method 2007.3 Test Condition A
Connect a 0.01uF
bypass capacitor
<0.1”(2.54mm)
from the pad.
inductance
for internal
copper flood.
Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.
SMD product suitable for Convection Reflow soldering. Peak
temperature 260°C. Maximum time above 220°C, 60 seconds.
Solderability per Mil Std 883E Method 2003
4
3
Buffer
Solderability
Ground
1
Ground,
should have
2
Suggested Pad Layout
Ground
Top View
Top View
a large copper
area for reduced
inductance.
4
50 Ohm Trace
Without
Vias
3
OSC
Output
Buffer
TOP LAYER
GROUND LAYER
(Top View)
BOTTOM LAYER
Typical Phase Noise
2
1
Model TV504-019.2MHz
Solder Profile
Temperature
260°C
260°C
220°C
180°C
150°C
120°C
0
Time
120 S
Max.
10 S
60 S
Max.
360 Sec. Max.
LVCMOS Output Waveform
90%
50%
10%
4-PAD Ceramic Package
0.197x0.295 (5.0x7.0mm)
Standard Orientation
Tape and Reel Specifications
Clipped Sinewave Output Waveform
Meets EIA-481A and EIJ-1009B
2000 Pieces/Reel Maximum.
0.69
(17.53mm)
0.08
(2.0mm)
8.45 Dia.
(214.6mm)
0.08
(2.0mm)
Direction of Feed (Customer)
0.020 R.
(0.5mm)
0.157
(4mm)
0
0.63 (1.6mm) Dia.
0.059 (1.5mm) Dia.
0.079
(2mm)
9.84
(250mm)
0.069
(1.75mm)
0.295
(7.5mm)
0.08
(2.0mm)
0.642 (16.30mm)
0.626 (15.90mm)
3.15
(80mm)
200 mV/Div
0.059 (1.5mm) Dia. Minimum
1.0 Dia.
(25.4mm)
US Headquarters:
630-851-4722
3°
Typical
0.315
(8.0mm)
European Headquarters:
+353-61-472221
Pocket Size
0.31
(7.87mm)
(Bo)
(Ao)
(Bo)
(Ko)
5.33mm (0.21”)
7.87mm (0.31”)
3.07mm (0.121”)
0.210
(5.33mm)
(Ao)
3°
Typical
0.014 (+/-.004)
(0.36mm +/-.01)
Bulletin
Page
Tx215
0.121
(3.07mm)
(Ko)
16mm (0.630”) Width
8mm (0.315”) Pitch
SM-MECH09
4 of 4
01
Revision
Date
25 Aug 2008
Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation
相关型号:
©2020 ICPDF网 联系我们和版权申明