XH743-150.0M [CONNOR-WINFIELD]

LVCMOS Output Clock Oscillator,;


型号：	XH743-150.0M
厂家：	CONNOR-WINFIELD CORPORATION
描述：	LVCMOS Output Clock Oscillator,
文件：	总4页 (文件大小：694K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

High Reliability

Surface Mount LVCMOS

Clock Oscillator Series

Description:

Features:

2111 Comprehensive Drive

Aurora, Illinois 60505

Phone: 630-851-4722

Fax: 630-851-5040

The Connor-Winfield’s

Model XH7xx - XH8xx - XH9xx Series

XH7xx, XH8xx and XH9xx,

High Reliability Series are

5x7mm Surface Mount,

Fixed Frequency Crystal

Controlled Oscillators (XO).

Designed for applications

requiring tight frequency

Pure Spectrum™ Technology

•ꢀ5.0ꢀx7.0mmꢀSurfaceꢀMountꢀPackage

•ꢀSupplyꢀVoltages:ꢀ2.5Vꢀorꢀ3.3V

•ꢀLVCMOSꢀOutputꢀLogic

1245

XH723

150.0

MHZ

www.conwin.com

•ꢀFrequencyꢀStabilities:ꢀꢀ

ꢀ ꢀ ±50ppmꢁꢀ±75ppmꢁꢀ±±00ppm

•ꢀTemperatureꢀRanges:ꢀ

ꢀ ꢀ -40ꢀtoꢀ85°Cꢀ/ꢀ-55ꢀtoꢀ±25°Cꢀ/ꢀ-55ꢀtoꢀ85°C

stability over a wide temperature range,

operating at 2.5V or 3.3V supply voltage, the

XH7xx, XH8xx and XH9xx series provides an

LVCMOS output with enable / disable function.

The surface mount package is designed for

high-density mounting and is optimum for mass

production.

•ꢀLowꢀJitterꢀ<±pSꢀRMS

•ꢀSub-harmonicsꢀ/ꢀSpurious:ꢀ-70ꢀdBc

•ꢀMinimalꢀFrequencyꢀPerturbations:ꢀ

ꢀ ꢀ 3ppmꢀMax.

•ꢀGuaranteedꢀProperꢀFrequencyꢀStartup.

•ꢀScreeningꢀOptionsꢀareꢀAvailable

•ꢀGoldꢀPlatedꢀTerminations

Package Outline

Suggested Pad Layout

0.200

(5.08mm)

0.055

0.275

(1.40mm)

C–by Vcc

(7.0mm)

Ground

0.079

0.047

(2.0mm)

(1.20mm)

1245

XH723

150.0 MHZ

0.165

(4.2mm)

0.197

(5.0mm)

Top View

Keep Out Area

0.200

Ground

0.070

(1.8mm)

0.102

(5.08mm)

Bypass capacitor, C–by, should be

mounted as close to Vcc as possible

(2.60mm)

0.060

(1.50mm)

Keep Out Area: Do not route any traces in the keep out area. It is recommended the next layer under the keep out area is to be ground plane.

Enable / Disable Function

Pad Connections

Function: (Pad 1) Output

1: Enable / Disable (OE)

2: Ground:

3: Output

High or Open:

Low

Enabled

Disabled (High Impedance)

4: Supply Voltage (Vcc)

Ordering Information

-150.0M

Oscillator

Type

Temperature

Range

Output

Frequency

Tolerance

Supply Voltage

2 = 2.5 Vdc

3 = 3.3 Vdc

High Reliability

Clock

LVCMOS Series

5x7 mm

7 = -55 to 125°C

8 = -40 to 85°C

9 = -55 to 85°C

Frequency

Format

-xxx.xM Min.*

-xxx.xxxxxxM Max*

2 = 50 ppm

3 = 100 ppm

4 = 75ppm

*Amount of

numbers after the

decimal point.

M = MHz

Bulletin

Sm127

1 of 4

Page

Example Part Numbers:

Revision

XH723-150.0M = 5x7 mm package, -55 to 125°C, 100 ppm, 3.3 Vdc, LVCMOS, Output Frequency 150.0 MHz

XH922-44.736M = 5x7 mm package, -55 to 85°C, 50 ppm, , 3.3 Vdc, LVCMOS, Output Frequency 44.736 MHz

Date

19 April 2019

2111 Comprehensive Drive

Aurora, Illinois 60505

Phone: 630-851-4722

Fax: 630-851-5040

www.conwin.com

Absolute Maximum Ratings

Parameter

Minimum

-55

Nominal

Maximum

125

5.0

Vcc+0.5

Units

°C

Vdc

Notes

Storage Temperature

Supply Voltage (Vcc)

Input Voltage

-0.5

Operating Speciﬁcations

Parameter

Center Frequency: (Fo)

Minimum

Nominal

Maximum

Units

MHz

200

Operating Temperature Range: (See Ordering Information)

Model: XH7xx

-55

-40

-55

125

°C

Model: XH8xx

Model: XH9xx

Total Frequency Tolerance: (See Ordering Information)

Model: XH72x, XH82x, XH92x

Model: XH74x, XH84x, XH94x

-50.0

-75.0

50.0

75.0

100.0

ppm

Model: XH73x, XH83x, XH93x

Supply Voltage: (Vcc) (See Ordering Information)

Model: XH7x2, XH8x2, XH9x2

Model: XH7x3, XH8x3, XH9x3

Supply Current (Icc)

-100.0

2.375

3.135

2.5

3.3

2.625

3.465

Vdc

5ꢀ

10 to 39.999 MHz

40 to 79.999 MHz

80 to 89.999 MHz

90 to 124.999 MHz

125 to 164.999 MHz

165 to 200 MHz

Input Characteristics

Parameter

Minimum

Nominal

Maximum

Units

Vdc

Notes

Enable Voltage (High) (VIH)

Disable Voltage (Low) (VIL)

Enable Time

70ꢀ Vcc

30ꢀ Vcc

Disable Time

200

Output Disable Current (Standby Current) (Icc)

Enable / Disable Function Pad 1

High or Open

Output

Enabled

Disabled

Low

LVCMOS Output Characteristics

Parameter

Minimum

Nominal

Maximum

Units

Notes

Load

Output Voltage:

High (VOH)

Vcc-0.4

Vcc-0.3

0.3

ꢀ

Low (VOL)

0.4

Duty Cycle at 50ꢀ of Vcc

Rise / Fall Time: measured from 10ꢀ to 90ꢀ

For Frequencies < 60 MHz

For Frequencies > 60 MHz

Start-Up Time:

Sub-harmonics

Spurious

2.0

1.3

3.0

2.0

-70

dBc

dbc

ppm

Frequency Perturbations over Temperature

Bulletin

Sm127

2 of 4

Page

Revision

Date

19 April 2019

Speciﬁcations subject to change without notiﬁcation. See Connor-Winﬁeld's website for latest revision.

2111 Comprehensive Drive

Aurora, Illinois 60505

Phone: 630-851-4722

Fax: 630-851-5040

www.conwin.com

Jitter / Phase Noise Characteristics

Parameter

Jitter

Minimum

Nominal

Maximum

Units

Notes

Period Jitter

Integrated Phase Jitter

0.5

ps RMS

SSB Phase Noise for XH723 Fo = 40.0 MHz

@ 10 Hz offset

-75

dBC/Hz

@ 100 Hz offset

@ 1 KHz offset

@ 10 KHz offset

@ 100 KHz offset

-105

-125

-140

-145

-148

@ 1 MHz offset

Phase Noise Plot

Typical Phase Noise Plot Model XH723-40.0M

Package Characteristics

Package

Package Terminations

Hermetically sealed ceramic package and metal cover

Solder pads are Au plated, thickness 0.30 to 1.00 micron thick.

Environmental Characteristics

Vibration:

Shock:

Soldering Process;

Screening

Vibration per Mil Std 883E Method 2007.3 Test Condition A.

Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.

Meets IPC/JEDEC J-STD-020C. See soldering proﬁle on page 4.

Other screening options are available.

Notes:

ꢀ 1.ꢀInclusiveꢀofꢀcalibrationꢀ@ꢀ25°C,ꢀfrequencyꢀstabilityꢀvs.ꢀchangeꢀinꢀtemperature,ꢀsupplyꢀvoltageꢀandꢀloadꢀvariations,ꢀshockꢀandꢀvibrationꢀandꢀ10ꢀꢀ

ꢀ ꢀ yearsꢀaging.ꢀ

ꢀ 2.ꢀWhenꢀtheꢀoscillatorꢀisꢀdisabledꢀtheꢀoutputꢀisꢀarꢀhighꢀimpedance..ꢀOutputsꢀisꢀenabledꢀwithꢀnoꢀconnectionꢀonꢀ

ꢀ 3.ꢀOscillatorꢀisꢀguaranteedꢀtoꢀstartꢀatꢀtheꢀspeciﬁedꢀfrequencyꢀ(Fo)ꢀunderꢀallꢀconditions.

E/Dꢀpadꢀ1.

ꢀ 4.ꢀThisꢀpartꢀwillꢀnotꢀexhibitꢀfrequencyꢀjumpsꢀofꢀmoreꢀthatꢀ3ꢀppmꢀwhenꢀtestedꢀeveryꢀ2°Cꢀwithinꢀtheꢀoperatingꢀtemperatureꢀrangeꢀspeciﬁedꢀsupplyꢀꢀ

ꢀ ꢀ voltageꢀandꢀload.

Bulletin

Sm127

3 of 4

Page

Revision

Date

19 April 2019

Speciﬁcations subject to change without notiﬁcation. See Connor-Winﬁeld's website for latest revision.

2111 Comprehensive Drive

Aurora, Illinois 60505

Phone: 630-851-4722

Fax: 630-851-5040

www.conwin.com

Test Circuit

Output Waveform

OSCILLOSCOPE

90%

50%

10%

Vcc

PROBE

POWER

SUPPLY

OSC

.01uf

FREQ

COUNTER

Solder Proﬁle

INPUT for E/D

Temperature

260°C

220°C

180°C

150°C

120°C

10 s

Up to 120 s

60 to 90 s

Typical

Meets IPC/JEDEC J-STD-020C

Tape and Reel Dimensions

Direction of Feed (Customer)

16mm Tape

Revision History

Revision

Date

Note

08/15/08

01/14/09

05/06/09

05/28/13

11/25/09

08/17/12

12/11/12

01/16/13

04/19/19

New issue

Updated tape and reel information

Changed control voltage from 0.3 - 3.3 to 0.6 to 3.0, added note.

Added pure spectrum logo. 10.20.09

Added models XH822 XH832 XH823 XH833.

Removed RoHS and added screening options.

Updated data sheet format and rise and fall times, added 40 MHz phase noise plot.

Corrected pad numbering on package outline , top view. GD

Added 75ppm total tolerance option

Bulletin

Page

Sm127

4 of 4

Revision

Date

19 April 2019

Speciﬁcations subject to change without notiﬁcation. See Connor-Winﬁeld's website for latest revision.

XH743-150.0M [CONNOR-WINFIELD]

相关型号：

XH7XX

XH822-010.0M

XH822-10.0M

XH822-150.0M

XH822-200.0M

XH822-44.736M

XH822-FREQ

XH823-010.0M

XH823-10.0M

XH823-200.0M

XH823-44.736M

XH823-FREQ