905U-G-DE1-900-1W [COOPER]
905U-G Wireless Gateway;型号: | 905U-G-DE1-900-1W |
厂家: | COOPER BUSSMANN, INC. |
描述: | 905U-G Wireless Gateway 无线 栅 |
文件: | 总3页 (文件大小:223K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Technical Data TD032085EN
Effective January 2014
905U-G Wireless Gateway
Data-bus interface and conversion
Description
ELPRO wireless gateways provide the interface and communication
between industrial data-bus devices and field devices (such as
Modbus® to Profibus to EtherNet/IP: PLCs to SCADA/DCS, and so
on). Connected via RS-232/RS-485/RJ-45, register-allocated data-bus
values are transmitted and received by radio to and from field and
control room devices.
ELPRO 905U-G series products can multi-hop repeat up to four
times and support a variety of industrial protocols. They can be
combined with ELPRO 905U I/O and 115S series products to create
powerful I/O and data-bus networks.
Features
•ꢀ
865–867 MHz/902–928 MHz 1W, 19.2 kbps radio communications
to 20 miles (32 km)
•ꢀ
Multi-hop repeater function provides increased communication
distance
•ꢀ
Able to connect similar and dissimilar industrial protocols and
vendor devices (incorporating master/slave, slave/slave, and
master/master networks)
•ꢀ
Simple to complex networks, high reliability point-to-multipoint
communications with forward error correction (FEC), data integrity
check (CRC), and data encryption
•ꢀ
Eight configurable digital onborad I/O with I/O expansion via
ELPRO 115S I/O expansion range
•ꢀ
AC/DC/battery power options with UPS battery charger
•ꢀ
Module diagnostics including read/write of register I/O, reporting
of signal strength indication (RSSI), communications logging, and
internal measurement of low/normal and battery supply voltages
•ꢀ
Class I Div 2 hazardous area approval (US/Canada)
Applications
•ꢀ
Data-bus SCADA/DCS to PLC-PLC communications
•ꢀ
Moving machinery PLC to PLC/HMI connection and operation
•ꢀ
Data-bus cable replacement
•ꢀ
Smart instrument interface and connection (such as gas analyzers)
•ꢀ
Multi I/O data concentrator/repeater for large networks
Technical Data TD032085EN
905U-G Wireless Gateway
Effective January 2014
Specifications
SPECIFICATION
DESCRIPTION
SPECIFICATION
DESCRIPTION
Transmitter and Receiver
LED Indication and Diagnostics
a
b
c
Frequency
865–867 MHz , 902–928 MHz , 915–928 MHz
1W
LED indication
Active, OK, serial TX and RX, radio TX and RX, I/O LED status
Refer to the product manual for further information.
Transmit power
Transmission
Modulation
Reported diagnostics RSSI, comms logging, I/O status, battery voltage
Frequency hopping spread spectrum (FHSS)
Frequency shift keying
Power Supply
Nominal supply
12–24 Vac/9–30Vdc, over voltage/reverse power protected
Receiver sensitivity
Channel spacing
Data rate
–106 dBm @ 19.2 kbps
b c
50 x 250 kHz
Average current draw 905U-G-MD1: 150 mA @ 12V, 90 mA @ 24V, add 5 mA per I/O
905U-G-ET1/PR1/PR2/DE1/M+1: 270 mA @ 12V, 170mA @
24V, add 5 mA per I/O
19.2 kbps
d
Range (LoS)
20 miles (32 kms) @ 4W ERIP
9.3 miles (15+ km) @ 1W EIRP (other countries)
Transmit current draw 600 mA @ 13.8 Vdc (1W)
Battery supply
11.5–15.0 Vdc (nattery dupply volts internal I/O value)
Antenna connector
1 x female SMA standard polarity
Battery charge circuit Suitable for 12 Vdc sealed lead acid batteries
Max. charge current 2.0A (5W), 0.9A (500 mW)
Input and Output
e
Discrete I/O
8 input voltage-free/NPN, wetting current 0.5 mA
8 ouput FET 30 Vdc/500 mA
Compliance
EMC
FCC Part 15
Ethernet Port
Ethernet port
Link activity
Serial Port
RS-232
RF (radio)
Hazardous area
Safety
FCC Part 15.247, RSS 210, AS/NZS4268
CSA Class I, Division 2
EN 60950
10/100Base-T, RJ-45 connector, IEEE 802.3
Link, 100Base-T via LED
General
9-pin DB-9 female connector
Size
5.1" x 7.3" x 2.4" (130 mm x 185 mm x 60 mm)
Extruded aluminum
f
RS-485
2-pin terminal block, nonisolated
Housing
Data rate (bps)
Serial settings
300, 600, 1200, 2400, 4800, 9600, 14400, 19200
7/8 data bits, stop/start/parity (configurable)
Mounting
Terminal blocks
Temperature rating
DIN rail
Removable, max. conductor 14 AWG 0.1 in.2 (2.5 mm2)
Protocols and Configuration
905U-G-MD1: –40 to 140°F (–40 to +60°C)
System address
Protocols supported
905U-G-MD1
Configurable system address
905U-G-ET1/PR1/PR2/DE1/M+1: –32 to 140°F (0 to +60°C)
Model specific
Humidity rating
Weight
905U-G-MD1: RH noncondensing 0–99%
905U-G-ET1/PR1/PR2/DE1/M+1: RH noncondensing 0–95%
Modbus RTU (master/slave), or Allen Bradley DF1
Up to 4300 I/O points: analog and/or discrete I/O
Modbus, RS-232/RS-485: 300–38400 bps
DF1 (full duplex), RS-232: 300–38400 bps
2.2 lbs (1 kg)
Nꢀote Specifications are subject to change.
905U-G-ET1
Ethernet/IP (level 2 I/O server)
Modbus/TCP (class 0, 1: partially class 2 slave)
TCP/IP functions; embedded Web system (dynamic HTTP)
On-board file system for downloadable Web pages via FTP
server; email (SMTP)
a
b
c
d
Available in selected Asian countries
Configured for US
Typical maximum line-of-sight range (single
hop, repeaters will extend)
e
f
Configurable as inputs/outputs
Maximum distance 1200m
Configured for Australia
2048 bytes input/2048 bytes output: up to 4300 DI/O or 1024
AI/1024 AO10/100 Mbps, RJ-45 connector
Ordering
905U-G-PR1
905U-G-PR2
Profibus DP slave to EN 50170 standard
PRODUCT CODE DESCRIPTION
FREQUENCY
RF POWER
416 I/O bytes (up to 1952 DI/1952 DO or up to 122 AI/122 AO)
RS-485 optically isolated with on-board DC/DC converter
Automatic baud rate detection: 9600 bps to 12 Mbps
Industrial Protocol - DeviceNet Slave
905U-G-DE1-900-1W Gateway, DeviceNet slave 902–928 MHz
905U-G-DE1-866-1W Gateway, DeviceNet Slave 865–867 MHz
Industrial Protocol - Ethernet/IP, Modbus TCP
1W
1W
Profibus DP master to EN 50170 standard
2048 bytes input/2048 bytes output: up to 4300 DI/O or
1024 AI/1024 AO
RS-485 optically isolated with on-board DC/DC converter
Automatic baud rate detection: 9600 bps to 12 Mbps
905U-G-ET1-900-1W Gateway, Ethernet
905U-G-ET1-866-1W Gateway, Ethernet
Industrial Protocol - Modbus Plus Slave
902–928 MHz
865–867 MHz
1W
1W
905U-G-DE1
DeviceNet™ slave
512 bytes input/512 bytes output (up to 4300 DI/O or
905U-G-M+1-900-1W Gateway, Modbus Plus slave 902–928 MHz
905U-G-M+1-866-1W Gateway, Modbus Plus slave 865–867 MHz
Industrial Protocol - Modbus RTU/DF1
1W
1W
256 AI/256 AO)
Register size 16 bit, number of remote addresses 500
RS-422 optically isolated (selectable baud rate between 125,
250, 500 kbps)
905U-G-MD1-900-1W Gateway, Modbus/DF1
905U-G-MD1-866-1W Gateway, Modbus/DF1
Industrial Protocol - Profibus Master/Slave
905U-G-PR1-900-1W Gateway, Profibus
905U-G-PR1-866-1W Gateway, Profibus
905U-G-PR2-900-1W Gateway, Profibus
905U-G-PR2-866-1W Gateway, Profibus
902–928 MHz
865–867 MHz
1W
1W
905U-G-M+1
Modbus+slave
Global database transactions: routing up to six networks
2048 bytes input/2048 bytes output (up to 4300 DI/O or
1024 AI/1024 AO)
RS485 optically isolated: standard baud rate 1 Mbps
E-series configuration utility
902–928 MHz
865–867 MHz
902–928 MHz
865–867 MHz
1W
1W
1W
1W
User configuration
Configurable
parameters
Individual I/O mappings, update time, data bus mappings,
protocol settings
Nꢀote Available RF power and frequency may vary depending on country of
application.
Security
64-bit encryption on radio and serial
2
EATON www.eaton.com/wireless
Technical Data TD032085EN
905U-G Wireless Gateway
Effective January 2014
Accessories
PRODUCT CODE DESCRIPTION
DATA SHEET
PRODUCT CODE DESCRIPTION
DATA SHEET
Antennas - 900 MHz
SER-DB9
Serial RS-232 cable, DB-9 male to DB-9
female, straight through
TD032026EN
DG900-1
Whip antenna, SMA male, angle bracket,
TD032047EN
TD032045EN
–2 dBi gain, 3' (1m) coaxial cable
Surge Diverters
WH900-SMA
CFD890EL
Whip antenna, SMA male, –2 dBi gain
CSD-SMA-2500
SMA surge diverter for use with CC10/
CC20–SMA
TD032029EN
TD032031EN
TD032029EN
Dipole antenna, SMA male, mounting bracket, TD032048EN
2 dBi gain, 16' (5m) coaxial cable
CSD-N-6000
Coaxial surge diverter, bulkhead N female to
N female
SG900EL
SG900-6
Collinear antenna, N-type female, 5 dBi gain
Collinear antenna, N-type female, 8 dBi gain
Yagi antenna, N-type female, 9 dBi gain
Yagi antenna, N-type female, 15 dBi gain
TD032049EN
TD032050EN
TD032042EN
TD032051EN
MA15/D/1/SI
MA15/D/2/S1
Power supply surge diverter, 110 Vdc/15A
Power supply surge diverter, 240 Vac/15A
YU6-900
IOP32D
Signal surge diverter, 2 x 2-wire/1 x 4-wire
TD032032EN
YU16-900
Cables
Power Supplies
PS-DINAC-12DC-OK DIN rail power supply, 100–250 Vac,
12 Vdc/2.5A
TD032033EN
TD032034EN
CC3/10/20-SMA
Coaxial cable kit, 9.8' (3m)/32' (10m)/65' (20m), TD032019EN
N-type to N-type/SMA male
TD032020EN
TD032021EN
PSG60E
DIN rail power supply, 85–264 Vac,
24 Vdc/2.5A
CCTAIL-SMA-F/M Coaxial cable tail, 24" (0.6m), SMA to N-type TD032023EN
female or male
Mounting Brackets
BR-COL-KIT
Mounting bracket kit for collinear antenna
Mounting bracket kit for Yagi antenna
TD032071EN
TD032072EN
BR-YAG-KIT
Eaoꢀn’s wirtltss busintss
www.eaton.com/wireless
North America & Latin America
5735 W. Las Positas Suite 100
Pleasanton, CA 94588
United States
Telephone: +1 925 924 8500
Australia, New Zealand
China
955 Shengli Road
East Area of Zhangjiang High-Tech Park
Shanghai, 201201
China
9/12 Billabong Street
Stafford Queensland 4053
Australia
Telephone: +61 7 3352 8600
Telephone: +86 21 2899 3600
Southeast Asia
Europe
2 Serangoon North Avenue 5
# 06-01 Fu Yu Building, 554911
Singapore
Hein-Moeller-Straße 7-11
53115 Bonn, Germany
Telephone: +49 228 602 5573
Telephone: +65 6645 9888
Eaoꢀn
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2014 Eaton
All Rights Reserved
Printed in USA
Eaton is a registered trademark.
Publication No. TD032085EN
January 2014
All other trademarks are property
of their respective owners.
相关型号:
©2020 ICPDF网 联系我们和版权申明