KCV [COOPER]
250V and 600V cable limiters;型号: | KCV |
厂家: | COOPER BUSSMANN, INC. |
描述: | 250V and 600V cable limiters |
文件: | 总6页 (文件大小:716K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Effective December 2015
Supersedes February 2015
Technical Data 1042
250V and 600V cable limiters
Features and benefits:
•ꢀ
Cable limiters enhance multi-conductor
system reliability by isolating faulted
conductors and taking them offline while
the balance of the conductors continue
delivering power to their circuits.This is why
cable limiters are often used in utility low
voltage networks and large multi-cable per
phase service entrances.
•ꢀ
Cable limiters enhance service entrance
conductor short-circuit protection with
current-limiting performance that exceed
the typical protection offered by utility
overcurrent protective devices.
•ꢀ
Cable limiters meet many system
requirements with 250Vac or 600Vac
ratings for conductor sizes from 12AWG to
1000kcmil and terminal options available that
make them easy to install including: tube-
to-tube (crimp), tube-to-bolt (crimp/bolt-in),
compression rod-to-tube (crimp) and bolt-to-
offset bolt (bolt-in) options.
Select cable limiters are UL® Listed under
•ꢀ
File E90818 for use on 600V circuit for the
protection of faults up to 200kA.
Product description:
Cable limiters are intended to provide short-
circuit protection to electrical systems, typically
between the transformer and service entrance.
Should a short-circuit occur, the cable limiter
removes the affected cable(s) from service
and permits the other conductors to continue
delivering power.
Cable limiters are often used in utility low volt-
age networks and large multi-cable per phase
service entrances.
Unlike fuses, cable limiters are selected by
cable size rather than amperage, e.g., a “4/0”
limiter will carry the current of a 4/0 cable.
Limiters are stable, totally self-contained, static
devices with unchanging characteristics that
operate without venting of ionized gases or
explosive action.
Under high short-circuit conditions, limiters
cut off fault currents within one-half cycle
(0.008 seconds) and reduce insulation damage
from the immense heat that is developed
by sustained fault current flow.They confine
damage to the point of the short-circuit and
stop long-length cable burn-back and striking
of multiple arcs to minimize damage to or
eliminate damage to adjacent conductors.
Cable limiters
Technical Data 1042
Effective December 2015
250V UH Series
Catalog Symbol: UH__
Applications:
•ꢀ
The 250Vac UH cable limiters are deisnged specifically for use
in residentail applications.
Ratings:
•ꢀ
Volts: up to 250Vac
•ꢀ
Interrupting Rating: 100kA, RMS Sym.
Terminals:
•ꢀ
Center bolt-to-offset bolt — copper or aluminum conductors
Conductors:
•ꢀ
Copper or aluminum conductors are permitted per the listed
cable size. Select the catalog symbol for the system conductor
size in the table below.
Dimensions - in (mm)
H
G
F
C
A1
A2
B
D
Bolt
terminal
detail
E
E
I
Catalog Copper
Aluminum
symbol
cable size cable size A1
A2
B
C
D
E
F
G
H
I
UHA
2/0AWG
3/0AWG
350kcmil
600kcmil
4/0AWG
250kcmil
500kcmil
800kcmil
1.06 (27.0) 1.19 (30.2) 1.44 (36.5) 1.00 (25.4) 0.75 (19.0) 0.12 (3.2) 0.56 (14.3) 0.19 (4.8)
0.59 (15.1) 0.41 (10.3)
UHJ-M
UHJ-T
UHJ-W
1.53 (38.9) 1.75 (44.4) 1.59 (40.5) 1.50 (38.1) 1.00 (25.4) 0.25 (6.3) 0.87 (22.2) 0.34 (8.6) 0.69 (17.5) 0.56 (14.3)
1.53 (38.9) 1.75 (44.4) 1.59 (40.5) 1.50 (38.1) 1.00 (25.4) 0.25 (6.3) 0.87 (22.2) 0.34 (8.6) 0.69 (17.5) 0.56 (14.3)
1.53 (38.9) 1.75 (44.4) 1.59 (40.5) 1.50 (38.1) 1.00 (25.4) 0.25 (6.3) 0.87 (22.2) 0.34 (8.6) 0.69 (17.5) 0.56 (14.3)
2
Eaton.com/bussmannseries
Cable limiters
Technical Data 1042
Effective December 2015
600V K Series
Catalog Symbol: K__
Applications:
The 600Vac K cable limiters are designed for use on
non-residential 277/480, 120/208 and 120/240 volt systems.
Ratings:
•ꢀ
Volts: up to 600Vac
•ꢀ
Interrupting Rating: 200kA, RMS Sym.
Agency information:
•ꢀ
KCD, KCJ, KCM, KCR, KDM, KDR, KDP and KFM cable limiters
are UL Listed under File E90818 for only copper conductors.
Terminals:
•ꢀ
Tube-to-tube
•ꢀ
Tube-to-offset bolt
•ꢀ
Compression rod-to-tube
•ꢀ
Center bolt-to-offset bolt
Conductors:
•ꢀ
Copper only on:
•ꢀ Tube-to-tube
•ꢀ Tube-to-offset bolt
•ꢀ Compression rod-to-tube
•ꢀ
Copper or aluminum on
•ꢀ Center bolt-to-offset bolt
Terminals:
•ꢀ
Tube-to-tube — copper conductor only
Dimensions - in (mm)
A
A
C
B
E
D
Catalog
symbol
Copper
cable size
A
B
C
D
E
KCY
4AWG
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.5 (38.1)
1.63 (41.3)
1.63 (41.3)
1.75 (44.5)
1.88 (47.6)
2.0 (50.8)
2.88 (73.0)
3.5 (88.9)
3.5 (88.9)
5.0 (127.0)
2.88 (73.0)
2.88 (73.0)
2.88 (73.0)
2.88 (73.0)
2.625 (66.7)
2.625 (66.7)
3.63 (92.1)
3.63 (92.1)
3.63 (92.1)
3.63 (92.1)
3.08 (78.2)
3.08 (78.2)
3.75 (95.25)
3.75 (95.25)
1.06 (27.0)
1.06 (27.0)
1.06 (27.0)
1.06 (27.0)
1.25 (31.8)
1.25 (31.8)
1.44 (36.5)
1.44 (36.5)
1.44 (36.5)
1.63 (41.3)
1.88 (47.6)
1.88 (47.6)
2.5 (63.5)
2.5 (63.5)
0.31 (7.9)
0.34 (8.7)
0.44 (11.1)
0.47 (11.9)
0.52 (13.1)
0.44 (14.3)
0.61 (15.5)
0.34 (17.5)
0.75 (19.0)
0.88 (22.2)
1.06 (27.0)
1.155 (29.3)
1.31 (33.3)
1.56 (39.7)
0.25 (6.4)
0.28 (7.1)
0.31 (7.9)
0.34 (8.7)
0.39 (9.9)
0.70 (11.1)
0.48 (12.3)
0.55 (14.0)
0.59 (15.0)
0.70 (17.9)
0.83 (21.0)
0.92 (23.4)
1.06 (27.0)
1.22 (31.0)
KCZ
3AWG
KCA
2AWG
KCB
1AWG
KCC
KCD*, †
1/0AWG
2/0AWG
3/0AWG
4/0AWG
250kcmil
350kcmil
500kcmil
600kcmil
750kcmil
1000kcmil
KCE
KCF
KCH
KCJ*†
KCM*, †, ††
KCV
KCR*, †
KCS
* UL Listed, File E90818, 600Vac, 200kA I.R.
† Available with shrink tube “–V” suffix.
††Available with molded rubber boot “-B” suffix. Boot can be purchased separately, order Part# - BOOT-KCM
Eaton.com/bussmannseries
3
Cable limiters
Technical Data 1042
Effective December 2015
Terminals:
•ꢀ
Tube-to-offset bolt — copper conductor only
Dimensions - in (mm)
0.125"
(3.18mm)
1.63"
0.56"
(41.3mm)
(14.3mm)
A
F
C
B
G
J
Bolt
terminal
detail
E
D
H
0.56"
(14.3mm)
Catalog
symbol
Copper
cable size
A
B
C
D
E
F
G
H
J
KQV
KQT
12AWG
10AWG
1.25 (31.8)
1.25 (31.8)
2.88 (73.0)
2.88 (73.0)
1.06 (27.0)
1.06 (27.0)
0.19 (4.8)
0.125 (3.2)
0.14 (3.6)
3.31 (84.1)
3.31 (84.1)
0.72 (18.3)
0.72 (18.3)
0.19 (4.8)
0.19 (4.8)
1.125 (28.6)
1.125 (28.6)
0.23 (6.0)
KFZ
8AWG
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.25 (31.8)
1.5 (38.1)
1.63 (41.3)
1.63 (41.3)
1.75 (44.5)
1.88 (47.6)
2.0 (50.8)
2.88 (73.0)
3.5 (88.9)
3.5 (88.9)
2.88 (73.0)
2.88 (73.0)
2.88 (73.0)
2.88 (73.0)
2.88 (73.0)
2.625 (66.7)
2.625 (66.7)
3.63 (92.1)
3.63 (92.1)
3.63 (92.1)
3.63 (92.1)
3.08 (78.2)
3.75 (95.2)
3.75 (95.2)
1.06 (27.0)
1.06 (27.0)
1.06 (27.0)
1.06 (27.0)
1.06 (27.0)
1.25 (31.8)
1.25 (31.8)
1.44 (36.5)
1.44 (36.5)
1.44 (36.5)
1.63 (41.3)
1.88 (47.6)
2.5 (63.5)
2.5 (63.5)
0.23 (6.0)
0.31 (7.9)
0.16 (4.0)
0.16 (4.0)
0.25 (6.4)
0.31 (7.9)
3.31 (84.1)
3.31 (84.1)
3.31 (84.1)
3.31 (84.1)
3.31 (84.1)
3.38 (85.7)
3.38 (85.7)
3.38 (85.7)
3.38 (85.7)
3.38 (85.7)
3.38 (85.7)
3.38 (85.7)
3.5 (88.9)
0.72 (18.3)
0.72 (18.3)
0.72 (18.3)
0.72 (18.3)
0.72 (18.3)
0.88 (22.2)
0.88 (22.2)
0.97 (24.6)
0.97 (24.6)
0.97 (24.6)
1.06 (27.0)
1.19 (30.2)
1.5 (38.1)
0.19 (4.8)
0.19 (4.8)
0.19 (4.8)
0.19 (4.8)
0.19 (4.8)
0.25 (6.4)
0.25 (6.4)
0.25 (6.4)
0.25 (6.4)
0.25 (6.4)
0.25 (6.4)
0.25 (6.4)
0.25 (6.4)
0.25 (6.4)
1.125 (28.6)
1.125 (28.6)
1.125 (28.6)
1.125 (28.6)
1.125 (28.6)
1.125 (28.6)
1.125 (28.6)
1.125 (28.6)
1.125 (28.6)
1.125 (28.6)
1.125 (28.6)
1.63 (41.3)
2.0 (50.8)
KIG
6AWG
KDY
4AWG
0.31 (7.9)
KDA
2AWG
0.44 (11.1)
0.47 (11.9)
0.52 (13.1)
0.56 (14.3)
0.61 (15.5)
0.69 (17.5)
0.75 (19.0)
0.88 (22.2)
1.06 (27.0)
1.16 (29.4)
1.31 (33.3)
KDB
1AWG
0.34 (8.7)
0.39 (9.9)
0.44 (11.1)
0.48 (12.3)
0.55 (13.9)
0.59 (15.0)
0.70 (17.8)
0.83 (21.0)
0.92 (23.4)
1.06 (27.0)
KDC
1/0AWG
2/0AWG
3/0AWG
4/0AWG
250kcmil
350kcmil
500kcmil
600kcmil
750kcmil
KDD
KDE
KDF
KDH
KDJ†
KDM*,†
KDU
KDR*, ††
3.5 (88.9)
1.5 (38.1)
2.0 (50.8)
* UL Listed, File E90818, 600Vac, 200kA I.R.
† Available with molded rubber boot “-B” suffix. Boot can be purchased separately, order Part# - BOOT-KDM
††Available with shrink tube “–V” suffix.
4
Eaton.com/bussmannseries
Cable limiters
Technical Data 1042
Effective December 2015
Terminals:
•ꢀ
Compression rod-to-tube — copper conductor only
Dimensions - in (mm)
A
B
C
D
F
E
G
Catalog
symbol
Copper
cable size
A
B
C
D
E
F
G
KEX
4/0AWG
250kcmil
350kcmil
500kcmil
2.5 (63.5)
2.5 (63.5)
2.5 (63.5)
2.5 (63.5)
3.63 (92.1)
3.63 (92.1)
3.63 (92.1)
3.08 (78.2)
1.75 (44.5)
1.88 (47.6)
2.0 (50.8)
2.88 (73.0)
1.44 (36.5)
1.44 (36.5)
1.63 (41.3)
1.88 (47.6)
0.69 (17.5)
0.75 (19.0)
0.88 (22.2)
1.06 (27.0)
0.55 (13.9)
0.28 (15.1)
0.70 (17.8)
0.83 (21.0)
0.5 (12.7)
0.56 (14.3)
0.81 (20.6)
0.81 (20.6)
KFH-A
KQO
KDT
Terminals:
•ꢀ
Center bolt-to-offset bolt — copper or aluminum conductors
Dimensions - in (mm)
0.125"
(3.18mm)
1.63"
0.56"
F
(41.3mm)
(14.3mm)
C
A
A
B
D
E
Bolt
terminal
detail
0.25"
(6.4mm)
0.25"
0.56"
(6.4mm)
(14.3mm)
Catalog
symbol
Copper
Aluminum
cable size cable size
A
B
C
D
E
F
KPF
4/0AWG
250kcmil
350kcmil
500kcmil
750kcmil
4/0AWG
250kcmil
350kcmil
500kcmil
750kcmil
3.38 (85.7)
3.38 (85.7)
3.38 (85.7)
3.38 (85.7)
3.50 (88.9)
3.63 (92.1)
3.63 (92.1)
3.63 (92.1)
3.08 (78.2)
3.75 (95.3)
1.44 (36.5)
1.44 (36.5)
1.63 (41.3)
1.88 (47.6)
2.50 (63.5)
1.125 (28.6)
1.125 (28.6)
1.125 (28.6)
1.5 (38.1)
2.0 (50.8)
1.125 (28.6)
1.125 (28.6)
1.125 (28.6)
1.63 (41.3)
2.00 (50.8)
0.97 (24.6)
0.97 (24.6)
1.06 (27.0)
1.19 (30.2)
1.50 (38.1)
KFT
KEW
KDP*
KFM*
* UL Listed for copper only, File E90818, 600Vac, 200kA A.I.R.
Eaton.com/bussmannseries
5
Cable limiters
Technical Data 1042
Effective December 2015
Peak let-through current
Time-current characteristics - total clear
1000 kcmil
750 kcmil
500 kcmil
350 kcmil
250 kcmil
4/0 AWG
3/0 AWG
2/0 AWG
1/0 AWG
1 AWG
B
100,000
Cable size
100
2 AWG
3 AWG
4 AWG
6 AWG
10,000
8 AWG
10 AWG
12 AWG
Cable
Size
10
1000
A
100
1
Prospective short-circuit current symmetrical
RMS amps
0.1
0.01
Current in amps
The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this
document are by definition uncontrolled.This bulletin is intended to clearly present comprehensive product data and provide technical
information that will help the end user with design applications. Eaton reserves the right, without notice, to change design or construction
of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice,
any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible
applications.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
For Eaton’s Bussmann series
product information,
call 1-855-287-7626 or visit:
Eaton.com/bussmannseries
Eaton.com
Bussmann Division
114 Old State Road
Ellisville, MO 63021
United States
Eaton and Bussmann are valuable
trademarks of Eaton in the US and other
countries.You are not permitted to use the
Eaton trademarks without prior written
consent of Eaton.
Eaton.com/bussmannseries
Follow us on social media to get the
latest product and support information.
© 2015 Eaton
All Rights Reserved
Printed in USA
Publication No. 1042 – BU-SB14632
December 2015
UL is a registered trademark of the
Underwriters Laboratories, Inc.
相关型号:
©2020 ICPDF网 联系我们和版权申明