TCFH30 [COOPER]
Analog Circuit;型号: | TCFH30 |
厂家: | COOPER BUSSMANN, INC. |
描述: | Analog Circuit |
文件: | 总3页 (文件大小:166K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
¨
Bussmann
CUBEFuseª and Fuseholder
Finger-Safe Dual-Element Time-Delay Fuses
Indicating Ð 600 Volts or Less
TCF & TCFH
1-60 Amps
• The worldÕs first finger safe industrial fuse system.
• True dual-element fuse construction with a minimum of 10
seconds time-delay at 500% of rating.
• Long time-delay minimizes nuisance circuit openings due to
temporary overloads and transient surges.
• Time-delay characteristic allows for back-up protection
against motor burnout from overload or single phasing if
other overload device fails.
• Meets UL Class J Time-Delay electrical performance
requirements.
• High interruption rating to safely interrupt faults up to
300,000 amperes.
• Faster response to damaging faults reduces destructive
thermal and magnetic forces.
• Permanent open fuse indication.
• Designed to be an internationally accepted and specified
world class product.
• Smallest footprint of any power class fuse including Class J,
CC, T and RK.
• Meets requirements of IEC 60529 for IP-20 finger safe
rating.
• No venting of arc or molten metal and gases during
opening.
• Robust cycling and inrush current withstand.
• Low let through currents under fault conditions.
• Provides TYPE 2 Òno damageÓ protection for IEC motors
starters when properly sized.
• Low watt loss reduces power consumption and lowers
operating temperature.
• Conventional Class J fuse case sizes and ampere ratings.
• Dovetail fuseholder design for ganging multiple fuse poles.
• 30 and 60 Amp fuseholders can be ganged together.
• 30 Amp fuses can be plugged into the 60A holder without a
reducer.
Catalog Symbol: TCF (Fuse) & TCFH (Holder)
Dual-Element, Time-Delay Fuse: 10 Seconds
Minimum Operating Time at 500% Rated Current
Ampere Rating: 1 to 60 Amperes
Voltage Rating: 600 Volts AC (or less)
Interrupting Rating: 300,000A RMS Symmetrical (UL)
200,000A RMS Symmetrical (CSA)
Agency Approvals:
U.L. Listed Special Purpose Fuse (UL 248-8) (15-60A)
CSA Certified Fuse (CSA-22.2 No. 106) (15-60A)
U.L. Recognized Fuseholder
CSA Certified Fuseholder (C22.2 Nos. 39 & 65)
Other Electrical Certifications:
CE compliance for the European Union Low Voltage
Directive (50-1000V AC, 75-1500V DC)
• 35mm DIN rail and chassis mounting features.
• Fuseholder wire ports rated for dual wires.
DC Voltage Rating: 300 Volts DC (or less), 20,000AIR
Carton Quantity and Weight
Catalog Numbers
Ampere
Carton.
Weight Per Carton
TCF1
TCF3
TCF6
TCF10
TCF25
TCF45
TCFH60
TCF15
TCF30
TCF50
TCF17-1/2
TCF35
TCF60
TCF20
TCF40
TCFH30
Rating
TCF1-30
Qty
12
Lbs.
1.39
2.42
1.42
2.57
Kg.
.518
.902
.530
.958
TCFH1-30
TCF35-60
TCFH35-60
12
12
12
CUBEFuseª Fuseholder Catalog Data
Amps Poles
Wire *
#14 - #8 Cu
#14 - #4 Cu
Dual Wire * Part Number
30
60
1
1
#14 Cu
#10 Cu
TCFH30
TCFH60
* 75¼C (MIN) CU Wire Only
Form No. CUBEFuse
Page 1 of 3
BIF Document: 9000
This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice,
to change design or construction of any products and to discontinue or limit distribution of any product. Bussmann also reserves the right to change or update, without notice, any technical information
contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
¨
Bussmann
CUBEFuseª and Fuseholder
Finger-Safe Dual-Element Time-Delay Fuses
Indicating Ð 600 Volts or Less
TCF & TCFH
1-60 Amps
Time-Current Characteristic Curves Ð Average
Melt
Dimensional Data For TCF and TCFH
1000
100
10
A
B
C
G
1
E
D
F
H
0.1
0.01
K
I
RMS SYMMETRICAL CURRENT (AMPS)
J
Current Limitation Curves
B
100,000
Dimension
30A in [mm]
1.88 [47.75]
.75 [19.05]
1.00 [25.40]
.31 [7.94]
60A in [mm]
2.13 [54.10]
1.00 [25.40]
1.13 [28.58]
.44 [11.11]
.04 [1.02]
60A
50A
40A
30A
20A
15A
A
B
C
D
E
F
G
H
I
10,000
1,000
.04 [1.02]
.63 [15.88]
.27 [6.86]
.63 [15.88]
.38 [9.65]
2.30 [58.42]
.76 [19.30]
1.27 [32.18]
.15 [3.81]
2.60 [66.04]
1.03 [26.16]
1.53 [38.86]
.17 [4.32]
A
100
J
K
PROSPECTIVE SHORT-CIRCUIT CURRENT
(SYMMETRICAL RMS AMPS)
Form No. CUBEFuse
Page 2 of 3
BIF Document: 9000
This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice,
to change design or construction of any products and to discontinue or limit distribution of any product. Bussmann also reserves the right to change or update, without notice, any technical information
contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
¨
Bussmann
CUBEFuseª and Fuseholder
Finger-Safe Dual-Element Time-Delay Fuses
Indicating Ð 600 Volts or Less
TCF & TCFH
1-60 Amps
ELECTRICAL SPECIFICATIONS
FUSE MODULE MATERIAL SPECIFICATIONS
Fuse case: 20% glass filled PES (Polyethersulfone)
Maximum operating voltage: 600VAC (300VDC)
Maximum interruption current:
300K Amps maximum @ 600 VAC
20K Amps maximum @ 300 VDC
Watts Loss at rated current:
TCF30 : 3.99W
Fuse terminals: 110 Copper
Fuse terminal plating: Electroless Tin
Fusible element: Copper Alloys
Filler: Pure quartz silica
Fill plug: Nylon
TCF60: 6.23W
Indicator lens: PES (Polyethersulfone)
Indicator: Energetic chemical
Current limitation threshold:
30X rating minimum
FUSEHOLDER MATERIAL SPECIFICATIONS
Holder case: 15% glass filled PBT (polybutylene terephthalate)
Interface Clips: CDA7025
THERMAL SPECIFICATIONS
Operating temperature range: -10¡C to 65¡C
Interface Clip plating: Electroless Tin
Contact Lubricant: Fluoroether Grease
30A Box Lug: Copper
MECHANICAL SPECIFICATIONS
Tested continuous harmonic vibration: 0.03Ó amplitude,
10Hz-60Hz-10Hz 4min excursion, repeated for 4hr,
repeated for 3 mutually perpendicular planes (fuse in
holder)
60A Box Lug: Copper
DIN Rail Spring: Stainless Steel
Tested impact acceleration: 20g in 3 mutually
perpendicular planes
HANDLING & STORAGE SPECIFICATIONS
Storage Temperature: -10¡C to 65¡C
Form No. CUBEFuse
Page 3 of 3
BIF Document: 9000
This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice,
to change design or construction of any products and to discontinue or limit distribution of any product. Bussmann also reserves the right to change or update, without notice, any technical information
contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
相关型号:
©2020 ICPDF网 联系我们和版权申明