TCP [COOPER]
TCP1.25A,Telecom Circuit Protector;型号: | TCP |
厂家: | COOPER BUSSMANN, INC. |
描述: | TCP1.25A,Telecom Circuit Protector |
文件: | 总4页 (文件大小:172K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
™
TCP Series
TCP1.25A,Telecom Circuit Protector
Description
RoHS
2002/95/EC
• The first and most reliable surface mount telecom circuit
protector designed to protect against power cross faults
and comply with all surge requirements.
• Allows compliance with telecom regulatory standards
including Bellcore GR 1089, UL 1950/60950, and FCC part
68. Application circuit testing is recommended.
• Eliminates the need for a current limiting resistor.
• Protects against overcurrent conditions found in telecom
Subscriber Line Interface Cards (SLICs), xDSL Modem
Applications, Set-Top Boxes, and Consumer Premises
Equipment (CPE).
mm
Dimensions
⁄(inches)
• TCP1.25A tested and confirmed compatible with
STMicroelectronics Trisil™ Transient Surge Arrestor
(list of part numbers below)
STMicroelectronics Trisil™ P/N’s
SMP100LC-XXX
SMP100MC-XXX
ELECTRICAL CHARACTERISTICS
% of Amp Rating
Opening Time
4 Hours Minimum
1 Second Minimum
4-10 Seconds Typical
120 Seconds Maximum
10 Seconds Maximum
100%
250%
250%
250%*
300%
5.2
3.7
Land Pattern
(0.204)
(0.145)
4.0
(0.157)
* If the device does not open at 250% within 120 seconds, increase
current to 300% of amp rating. Device must open in 10 seconds max.
12.6
Environmental Data
(0.496)
• Life Test: MIL-STD-202, Method 108A, Test Condition D
• Load Humidity: MIL-STD-202, Method 103B
• Moisture Resistance: MIL-STD-202, Method 106E
• Thermal Shock: MIL-STD-202, Method 107D, air-to-air
• Case Resistance: EIA/IS-722
Agency Information
• UL Recognition Card: JDYX2/E19180
• CSA Component Certification Record and Class No.:
053787C000, 1422 30
• Resistance to Dissolution of Metallization:
ANSI J-STD-002, Test D
• Mechanical Shock: MIL-STD-202, Method 213B, Test
Condition A
• High Frequency Vibration: MIL-STD-202, Method 204D,
Test Condition D
• Resistance to Solvents: MIL-STD-202, Method 215A
Ordering
• Specify packaging, product and option code
(i.e., TR2/TCP1.25-R)
Soldering Method
• Wave Immersion: 260°C, 10 sec max.
• Infrared: 260°C, 30 sec max.
LIGHTNING SURGE SPECIFICATIONS
Surge Specification
Surge
Repetitions Waveform Current (A) Voltage (V)
(µSec.)
Performance
Requirement
FCC 47 Part 68
FCC 47 Part 68
Bellcore GR-1089-CORE First Level Lightning
Longitudinal Type A
Metallic Type B
2
2
50
50
1
10x160
10x560
10x1000
2x10
10x160
10x560
100 per fuse
100
1500
800
1000
2500
N/A
Fuse cannot open
Fuse cannot open
Fuse cannot open
Fuse cannot open
Fuse cannot open
Fuse cannot open
100
500
160
115
Bellcore GR-1089-CORE First Level Lightning
Surge out
Surge out
1
N/A
ELECTRICAL AND POWER CROSS SPECIFICATIONS
Product
Code
Voltage
Rating
AC
Interrupting
Rating*
DC Cold
Typical Maximum Typical
Alpha Code
Marking
1st Code 2nd Code
Resistance** (ohms)
min. typ. max.
0.070 0.090 0.110
Melting
Total
Voltage
Drop‡
150mV
2
250VAC 600VAC
I t†
Clearing
TCP1.25A
250 V
50 A
60 A
22.2 A2s
100 A2s
J
R***
*
AC Interrupting Rating (Measured at designated voltage, 100% power factor)
** DC Cold Resistance (Measured at 10% of rated current)
*** On RoHS Compliant Version (-R option)
†
‡
Typical Melting I2t (Measured with a battery bank at 60V DC, 10x-rated current, time constant of calibrated circuit less than 50 microseconds)
Typical Voltage Drop (Measured at rated current after temperature stabilizes)
™
TCP Series
TCP1.25A,Telecom Circuit Protector
Special Investigation
The TCP1.25A is designed to provide overcurrent protection for telecom SLIC, xDSL modem, and set-top box applications
regardless of the overvoltage device selected. To provide an easier specification experience, Cooper Bussmann and
STMicroelectronics have joined together to provide a special test report confirming the coordination between the TCP1.25A
and SMP100MC-270 devices.
TEST CIRCUITS
Fuse TCP 1.25A
Tip L
Tip S
Fuse TCP 1.25A
L1
L2
SMP100MC-270*
T1
SMP100MC-270*
Gnd
Gnd
SMP100MC-270*
Ring S
T2
Fuse TCP 1.25A
Ring L
Test Circuit 1
Test Circuit 2
* Note: or other STMicroelectronics Trisil™ part number listed in table on page 1
TEST PROGRAM
Test
Standard
Results
Lightning Surge Tests
10/1000µs + and –1kV 100A (25 pulses of each polarity)
2/10µs + and –2.5 and 5kV 500A (10 pulses of each polarity)
10/560µs + and –800V 100A (1 pulse of each polarity)
10/160µs + and –1.5kV 200A (1 pulse of each polarity)
10/700µs + and –1.5kV 37.5A (5 pulses of each polarity)
Electrical and Power Cross Tests
600V 3A 1.1s (first level)
277V 25A (second level)
600V 60A 5s(second level)
600V 40A 1.5s
600V 2.2A 30min
Bellcore GR-1089
Bellcore GR-1089
FCC Part 68
FCC Part 68
K20
Passed
Passed
Passed
Passed
Passed
Bellcore GR-1089
Bellcore GR-1089
Bellcore GR-1089
UL 60950
UL 60950
K20
Passed
Passed
Passed
Passed
Passed
Passed
Passed
Passed
600V 1A 0.2s (A criteria)
230V 1.44A/0.77A/0.38A 15min (A criteria)
230V 23A 15min (A criteria)
K20
K20
For additional information on STMicroelectronic’s Trisil™ Product line, please see www.st.com/protection
™
TCP Series
TCP500MA & TCP2A,Telecom Circuit Protector
Description
RoHS
2002/95/EC
• Designed to protect Consumer Premises Equipment from
harmful overcurrents.
• Allows compliance with telecom regulatory standards
including UL 1950/60950, and FCC part 68. Application
circuit testing is recommended.
• Eliminates the need for a current limiting resistor.
ELECTRICAL CHARACTERISTICS
% of Amp Rating
100%
Opening Time
4 Hours Minimum
1 Second Minimum
4-10 Seconds Typical
120 Seconds Maximum
10 Seconds Maximum
250%
250%
250%*
300%
mm
Dimensions
⁄(inches)
* If the device does not open at 250% within 120 seconds, increase
current to 300% of amp rating. Device must open in 10 seconds max.
Agency Information
• UL Recognition Card: JDYX2/E19180
• CSA Component Certification Record and Class No.:
053787C000, 1422 30
Environmental Data
5.2
3.7
Land Pattern
Ordering
• Life Test: MIL-STD-202, Method 108A, Test Condition D
• Load Humidity: MIL-STD-202, Method 103B
• Moisture Resistance: MIL-STD-202, Method 106E
• Thermal Shock: MIL-STD-202, Method 107D, air-to-air
• Case Resistance: EIA/IS-722
• Resistance to Dissolution of Metallization:
ANSI J-STD-002, Test D
• Mechanical Shock: MIL-STD-202, Method 213B, Test
Condition A
• High Frequency Vibration: MIL-STD-202, Method 204D,
Test Condition D
(0.204)
(0.145)
4.0
(0.157)
12.6
(0.496)
• Specify packaging, product and option code
(i.e., TR2/TCP500-R)
• Resistance to Solvents: MIL-STD-202, Method 215A
Soldering Method
• Wave Immersion: 260°C, 10 sec max.
• Infrared: 260°C, 30 sec max.
LIGHTNING SURGE SPECIFICATIONS
Surge Specification
Surge
Repetitions Waveform Current (A) Voltage (V)
Performance
Requirement
(µSec.)
TCP 500mA tested
FCC 47 Part 68
FCC 47 Part 68
Surge out
Longitudinal Type B
Metallic Type A
2
2
25
5x320
10x560
10x160
37.5
100
65
N/A
800
N/A
Fuse cannot open
Fuse must open safely
Fuse cannot open
TCP2A tested
10x160
FCC 47 Part 68
FCC 47 Part 68
Bellcore GR-1089-CORE First Level Lightning
Longitudinal Type A
Metallic Type B
2
2
50
50
1
100 per fuse
100
1500
800
1000
2500
N/A
Fuse cannot open
Fuse cannot open
Fuse cannot open
Fuse cannot open
Fuse cannot open
Fuse cannot open
10x560
10x1000
2x10
10x160
10x560
100
500
160
115
Bellcore GR-1089-CORE First Level Lightning
Surge out
Surge out
1
N/A
ELECTRICAL AND POWER CROSS SPECIFICATIONS
Product
Code
Voltage
Rating
AC
250 V
250 V
Interrupting
Rating*
DC Cold
Typical Maximum Typical
Alpha Code
Marking
1st Code 2nd Code
Resistance** (ohms)
min. typ. max.
0.420 0.530 0.640
0.050 0.075 0.100
Melting
Total
Voltage
Drop‡
471mV
205mV
2
250VAC 600VAC
I t†
Clearing
100 A2s
100 A2s
TCP500mA
TCP2A
50 A
50 A
40 A
60 A
1.3 A2s
30 A2s
F
N
R***
*
AC Interrupting Rating (Measured at designated voltage, 100% power factor)
** DC Cold Resistance (Measured at 10% of rated current)
*** On RoHS Compliant Version (-R option)
†
‡
Typical Melting I2t (Measured with a battery bank at 60V DC, 10x-rated current, time constant of calibrated circuit less than 50 microseconds)
Typical Voltage Drop (Measured at rated current after temperature stabilizes)
™
TCP Series
TCP500MA & TCP2A,Telecom Circuit Protector
TIME CURRENT CURVE
PACKAGING CODE
Packaging Code
TR2
Description
2,500 pieces of fuses on 24mm tape-and-reel on 13 inch (330mm) reel per EIA Standard 481, 8mm pitch
OPTION CODE
Description
RoHS Compliant Version (Sn plating w/ Ni barrier)
Option Code
-R
Visit us on the web at:
North America
Europe
Asia Pacific
www.cooperbussmann.com
Cooper Electronic Technologies Cooper Bussmann
1225 Broken Sound Parkway NW P.O. Box 14460
Cooper Electronic Technologies Cooper Electronic Technologies Cooper Electronic Technologies
Cooper (UK) Limited
Avda. Santa Eulalia, 290
08223
1 Jalan Kilang Timor
#06-01 Pacific Tech Centre
Singapore 159303
Tel: +65 278 6151
Fax: +65 270 4160
Datasheet: OC-2609 1/07
Suite F
St. Louis, MO 63178-4460
Burton-on-the-Wolds
Boca Raton, FL 33487-3533
Tel: 1-561-998-4100
Fax: 1-561-241-6640
Toll Free: 1-888-414-2645
Tel: 1-636-394-2877
Fax: 1-800-544-2570
Leicestershire • LE12 5TH UK
Tel: +44 (0) 1509 882 737
Fax: +44 (0) 1509 882 786
Terrassa, (Barcelona), Spain
Tel: +34 937 362 812
+34 937 362 813
© Cooper Electronic
Technologies 2007
Fax: +34 937 362 719
相关型号:
TCP-2-10
Splitter And Combiner, 5MHz Min, 1000MHz Max, 1.4dB Insertion Loss-Max, CASE DB714, 6 PIN
MINI
TCP-2-10+
Splitter And Combiner, 5MHz Min, 1000MHz Max, 1.4dB Insertion Loss-Max, ROHS COMPLIANT,CASE DB714, 6 PIN
MINI
TCP-2-10-75
Splitter And Combiner, 5MHz Min, 1000MHz Max, 1.4dB Insertion Loss-Max, CASE DB714, 6 PIN
MINI
TCP-2-10-75+
Splitter And Combiner, 5MHz Min, 1000MHz Max, 1.4dB Insertion Loss-Max, CASE DB714, 6 PIN
MINI
TCP-2-10-75X
Combiner, 5MHz Min, 1000MHz Max, 1.4dB Insertion Loss-Max, ROHS COMPLIANT, CASE DB1627, 6 PIN
MINI
TCP-2-10X
Combiner, 5MHz Min, 1000MHz Max, 1.4dB Insertion Loss-Max, ROHS COMPLIANT, CASE DB1627, 6 PIN
MINI
©2020 ICPDF网 联系我们和版权申明