CQHS3004832-R [COSEL]
DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid, PACKAGE-8;型号: | CQHS3004832-R |
厂家: | COSEL CO., LTD. |
描述: | DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid, PACKAGE-8 |
文件: | 总6页 (文件大小:335K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
.
Ordering information
DC-DC Converters Bus Converter Power Module Type
CQH S 250 48
50 -O
6
CQHS250
1
2
3
4
5
1Series name
2Single output
3Output wattage
4Input voltage
R
48:DC36 - 76V
5Output voltage
6Optional
R :with Remote ON/OFF
Positive logic control
N :Auto restart in protection
circuit working
B :Base plate option with
Mounting hole M3
L2:Pin length 5.3mm
MODEL
CQHS2504832
CQHS2504850
250
MAX OUTPUT WATTAGE[W]
DC OUTPUT
252.8
32V 7.9A
50V 5.0A
SPECIFICATIONS
MODEL
CQHS2504832
DC36 - 76
5.60typ
94typ
CQHS2504850
VOLTAGE[V]
CURRENT[A]
*1
*1
5.54typ
94typ
INPUT
EFFICIENCY[%]
START-UP VOLTAGE[V]
HYSTERESIS VOLTAGE[V]
VOLTAGE[V]
DC32 - 36
DC2 min
32
50
CURRENT[A]
7.9
5.0
LINE REGULATION[mV]
LOAD REGULATION[mV]
-20 to +85C
64max
100max
100max
CQHS
64max
255max
320max
400max
500max
*2
Vin=36-60V
-20 to +85C
Vin=60-76V
RIPPLE[mVp-p]
*2
*2
*2
320max
320max
410max
500max
500max
650max
1000max
185max
-
40 to -20C
OUTPUT
-20 to +85C
RIPPLE NOISE[mVp-p]
*2
-40 to -20C
TEMPERATURE REGULATION[mV] -40 to +85C 640max
*3
120max
DRIFT[mV]
200max (DCIN 48V, Io=100%)
START-UP TIME[ms]
Fixed (TRM pin open), adjustable by external resistor
*
4
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
26.88 - 35.20
31.68 - 32.32
45.0 - 55.0
*1
49.50 - 50.50
OUTPUT VOLTAGE SETTING[V]
OVERCURRENT PROTECTION Works over 105% of rating, low voltage protection (shut down) function is built-in.
PROTECTION
CIRCUIT AND
OTHERS
OVERVOLTAGE PROTECTION[V] 36.80 - 44.80
56.50 - 67.50
REMOTE SENSING
REMOTE ON/OFF
INPUT-OUTPUT
Provided
Provided (Negative Logic L : ON, H :OFF)
DC1,500V or AC500V 1minute, Cutoff current = 10mA, DC500V 50MWmin (20±15C)
DC1,500V or AC500V 1minute, Cutoff current = 10mA, DC500V 50MWmin (20±15C)
AC500V 1minute, Cutoff current = 100mA, DC500V 50MWmin (20±15C)
*
5
5
ISOLATION
INPUT-BASE PLATE
OUTPUT-BASE PLATE
*
OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max
ENVIRONMENT
2
VIBRATION
10 - 55Hz, 49.0m/s (5G), 3minutes period, 60minutes each along X, Y and Z axis
2
IMPACT
196.1m/s (20G), 11ms, once each along X, Y and Z axis
SAFETY
OTHERS
AGENCY APPROVALS
UL60950-1, C-UL (CSA60950-1), EN60950-1
57.9X10.5X22.76mm [2.28X0.41X0.9 inches] (WXHXD) / 30g max
CASE SIZE/WEIGHT
COOLING METHOD
*5
58.4X12.7X23.26mm [2.3X0.5X0.92 inches] (WXHXD) / 45g max
Convection / Forced air / Conduction
*1 At rated input(DC48V), rated load. Ta= 25C, 2m/s.
*2 Ripple and ripple noise is measured by using measuring board. Refer to the manual.
*3 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
*4 When the input voltage is in the range of DC36-40V, output voltage is limited. Refer to the manual.
*5 Base Plate Option.
CQHS-2
CQHS250
External view
1. DIP
Tolerance : ±0.5 [±0.02]
Weight : 30g max(DIP)
45g max(Base Plate)
Dimensions in mm, [ ]=inches
57.9
[2.28]
50.8
[2.0]
Model
+VOUT
+S
TRM
−S
+VIN
RC
−VIN
−VOUT
10.5max
[0.41]
3.68 ±0.25
[0.14]
±VIN/RC/TRM/±S Pin
±VOUT Pin
1.7
±0.1
1 ±0.1
1.5
2. Base Plate (option B)
58.4
[2.3]
Model
50.8
[2.0]
CQHS
2-M3
Mounting Hole
3.68 ±0.25
[0.14]
12.7
[0.5]
Recommended size for processing PCB
(TOP VIEW)
50.8
[2.0]
−VOUT
−S
TRM
+S
+VOUT
−VIN
RC
6- 1.5
Outline
2-
2
+VIN
Dimensions in mm, [ ]=inches
Div.:0.5inch
CQHS-3
.
Ordering information
DC-DC Converters Bus Converter Power Module Type
CQH S 300 48
50 -O
6
CQHS300
1
2
3
4
5
1Series name
*Providing heat sink
as option
R
2Single output
3Output wattage
4Input voltage
48:DC36 - 76V
5Output voltage
6Optional
R :with Remote ON/OFF
Positive logic control
T :with Mounting hole
f3.4 thru
MODEL
CQHS3004832
CQHS3004850
300
MAX OUTPUT WATTAGE[W]
DC OUTPUT
300.8
32V 9.4A
50V 6A
SPECIFICATIONS
MODEL
CQHS3004832
DC36 - 76
6.67typ
94typ
CQHS3004850
VOLTAGE[V]
CURRENT[A]
*1
*1
6.65typ
94typ
INPUT
EFFICIENCY[%]
START-UP VOLTAGE[V]
HYSTERESIS VOLTAGE[V]
VOLTAGE[V]
DC32 - 36
DC2 min
32
50
CURRENT[A]
9.4
6.0
LINE REGULATION[mV]
LOAD REGULATION[mV]
64max
100max
100max
400max
CQHS
64max
*2
*2
255max
-20 to +100C
-40 to -20C
Vin=36-60V
320max
400max
500max
500max
RIPPLE[mVp-p]
-40 to -20C
Vin=60-76V
*2
OUTPUT
*2
*2
320max
410max
500max
650max
500max
1000max
185max
-20 to +100C
RIPPLE NOISE[mVp-p]
-40 to -20C
0 to +65C 320max
-40 to +100C 640max
TEMPERATURE REGULATION[mV]
*3
120max
DRIFT[mV]
200max (DCIN 48V, Io=100%)
START-UP TIME[ms]
Fixed (TRM pin open), adjustable by external resistor
*4
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
27.2 - 35.2
45.0 - 55.0
*1
31.68 - 32.32
49.50 - 50.50
OUTPUT VOLTAGE SETTING[V]
OVERCURRENT PROTECTION Works over 105% of rating, low voltage protection (shut down) function is built-in.
PROTECTION
CIRCUIT AND
OTHERS
OVERVOLTAGE PROTECTION[V] 36.80 - 44.80
56.50 - 67.50
REMOTE SENSING
REMOTE ON/OFF
INPUT-OUTPUT
Provided
Provided (Negative Logic L : ON, H :OFF)
DC1,500V or AC500V 1minute, Cutoff current = 10mA, DC500V 50MWmin (20±15C)
DC1,500V or AC500V 1minute, Cutoff current = 10mA, DC500V 50MWmin (20±15C)
AC500V 1minute, Cutoff current = 100mA, DC500V 50MWmin (20±15C)
ISOLATION INPUT-BASE PLATE
OUTPUT-BASE PLATE
OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +100C(On aluminum base plate), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max
ENVIRONMENT
2
VIBRATION
10 - 55Hz, 49.0m/s (5G), 3minutes period, 60minutes each along X, Y and Z axis
2
IMPACT
196.1m/s (20G), 11ms, once each along X, Y and Z axis
SAFETY
OTHERS
AGENCY APPROVALS
CASE SIZE/WEIGHT
COOLING METHOD
UL60950-1, C-UL (CSA60950-1), EN60950-1
57.9X12.7X36.8mm [2.28X0.5X1.45 inches] (WXHXD) / 75g max
Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink)
*1 At rated input(DC48V), rated load, and aluminum base plate temperature 25C.
*2 Ripple and ripple noise is measured by using measuring board with recommended capacitor Co & the film capacitor 0.1mF.
*3 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
*4 When the input voltage is in the range of DC36-40V, output voltage is limited. Refer to the manual.
CQHS-4
CQHS300
External view
0.5
0.5
0.5
57.9
[2.28]
50.8
[2.0]
2-M3
Mounting Hole
0.1
6-º1
47.24
[1.86]
0.1
2-º1.5
-VIN
RC
-VOUT
-S
TRM
+S
+VOUT
+VIN
Name Plate
Lot No.
¶ Tolerance : 0.3 [ 0.012]
¶ Weight : 75g max
¶ Base Plate : Aluminum
¶ Dimensions in mm, [ ]=inches
¶ Mounting hole screwing torque : 0.49N-m (5.0kgf-cm) max
Base plate (Aluminum)
¶ Recommended size for processing PCB
(TOP VIEW)
CQHS
6-º1.5
2-º2
2-º3.5
47.24
[1.86]
50.8
[2.0]
¶ Dimensions in mm, [ ]=inches
¶ Div.:0.5inch
CQHS-5
.
Ordering information
DC-DC Converters Bus Converter Power Module Type
CQH S 350 48
50 -O
6
CQHS350
1
2
3
4
5
1Series name
*Providing heat sink
as option
R
2Single output
3Output wattage
4Input voltage
48:DC36 - 65V
5Output voltage
6Optional
R :with Remote ON/OFF
Positive logic control
T :with Mounting hole
f3.4 thru
MODEL
CQHS3504832
CQHS3504850
350
MAX OUTPUT WATTAGE[W]
DC OUTPUT
352
32V 11A
50V 7A
SPECIFICATIONS
MODEL
CQHS3504832
DC36 - 65
7.8typ
CQHS3504850
VOLTAGE[V]
CURRENT[A]
*1
*1
7.76typ
94typ
INPUT
94typ
EFFICIENCY[%]
START-UP VOLTAGE[V]
HYSTERESIS VOLTAGE[V]
VOLTAGE[V]
DC32 - 36
DC2 min
32
50
*5
CURRENT[A]
7.0
11.0
LINE REGULATION[mV]
LOAD REGULATION[mV]
64max
64max
255max
100max
100max
400max
CQHS
*2
*2
-20 to +100C
-40 to -20C
Vin=36-60V
320max
400max
500max
500max
RIPPLE[mVp-p]
-40 to -20C
Vin=60-65V
*2
OUTPUT
*2
*2
320max
410max
500max
650max
500max
1000max
185max
-20 to +100C
RIPPLE NOISE[mVp-p]
-40 to -20C
0 to +65C 320max
-40 to +100C 640max
TEMPERATURE REGULATION[mV]
*3
120max
DRIFT[mV]
200max (DCIN 48V, Io=100%)
START-UP TIME[ms]
Fixed (TRM pin open), adjustable by external resistor
*
4
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
26.88 - 35.20
31.68 - 32.32
45.0 - 55.0
*1
49.50 - 50.50
OUTPUT VOLTAGE SETTING[V]
OVERCURRENT PROTECTION Works over 105% of rating, low voltage protection (shut down) function is built-in.
PROTECTION
CIRCUIT AND
OTHERS
OVERVOLTAGE PROTECTION[V] 36.80 - 44.80
56.50 - 67.50
REMOTE SENSING
REMOTE ON/OFF
INPUT-OUTPUT
Provided
Provided (Negative Logic L : ON, H :OFF)
DC1,500V or AC500V 1minute, Cutoff current = 10mA, DC500V 50MWmin (20±15C)
DC1,500V or AC500V 1minute, Cutoff current = 10mA, DC500V 50MWmin (20±15C)
AC500V 1minute, Cutoff current = 100mA, DC500V 50MWmin (20±15C)
ISOLATION INPUT-BASE PLATE
OUTPUT-BASE PLATE
OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +100C(On aluminum base plate), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max
ENVIRONMENT
2
VIBRATION
10 - 55Hz, 49.0m/s (5G), 3minutes period, 60minutes each along X, Y and Z axis
2
IMPACT
196.1m/s (20G), 11ms, once each along X, Y and Z axis
SAFETY
OTHERS
AGENCY APPROVALS
CASE SIZE/WEIGHT
COOLING METHOD
UL60950-1, C-UL (CSA60950-1), EN60950-1
57.9X12.7X36.8mm [2.28X0.5X1.45 inches] (WXHXD) / 75g max
Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink)
*1 At rated input(DC48V), rated load, and aluminum base plate temperature 25C.
*2 Ripple and ripple noise is measured by using measuring board with recommended capacitor Co & the film capacitor 0.1mF.
*3 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
*4 When the input voltage is in the range of DC36-40V, output voltage is limited. Refer to the manual.
*5 Rated current is increased adjusting output voltage to lower than rated output voltage. Refer to the manual.
CQHS-6
CQHS350
External view
0.5
0.5
0.5
57.9
[2.28]
50.8
[2.0]
2-M3
Mounting Hole
0.1
6-º1
47.24
[1.86]
0.1
2-º1.5
-VIN
RC
-VOUT
-S
TRM
+S
+VOUT
+VIN
Name Plate
Lot No.
¶ Tolerance : 0.3 [ 0.012]
¶ Weight : 75g max
¶ Base Plate : Aluminum
¶ Dimensions in mm, [ ]=inches
¶ Mounting hole screwing torque : 0.49N-m (5.0kgf-cm) max
Base plate (Aluminum)
¶ Recommended size for processing PCB
(TOP VIEW)
CQHS
6-º1.5
2-º2
2-º3.5
47.24
[1.86]
50.8
[2.0]
¶ Dimensions in mm, [ ]=inches
¶ Div.:0.5inch
CQHS-7
相关型号:
CQHS3004850
DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid, ROHS COMPLIANT PACKAGE-8
COSEL
©2020 ICPDF网 联系我们和版权申明