NAC-10-222 [COSEL]
Single Phase EMI Filter, 250V, 60HzHz, ROHS COMPLIANT PACKAGE;型号: | NAC-10-222 |
厂家: | COSEL CO., LTD. |
描述: | Single Phase EMI Filter, 250V, 60HzHz, ROHS COMPLIANT PACKAGE LTE |
文件: | 总2页 (文件大小:332K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ordering information
High-attenuation type of common mode noise from 150kHz to 1MHz
NAC -10 -472 -O
NAC series
1
2
3
4
1Model Name
2Rated Current
3Line to ground capacitor code:See table 1.1.
R
table1.1 Line to ground capacitor code
Line to ground
Leakage Current
(Input 125/250V 60Hz)
Code
capacitor
(nominal value)
680pF
681
102
222
332
472
75.5 A/ 150 A max
0.13mA/ 0.25mA max
0.25mA/ 0.5 mA max
0.38mA/ 0.75mA max
0.5 mA/ 1.0 mA max
1000pF
2200pF
3300pF
4700pF
When the line to ground capacitor code is
different, the attenuation characteristic is
different.
*
4Options
D:DIN rail installation type
The terminal cover is retracted inside the unit
DIN rail installation type is option
The dimensions change when the option is set.
Refer to External view.
*
Features of NAC series
High-attenuation type of common mode noise from 150kHz to 1MHz
-Single Phase 250 VAC
-Push down type terminal block
Specifications
No.
Items
NAC-04-472
NAC-06-472
NAC-10-472
NAC-16-472
NAC-20-472
NAC-30-472
1
Rated Voltage[V]
AC 1f250 / DC250
2
Rated Current[A]
4
6
10
16
20
30
3
Test Voltage (Terminal-Mounting Plate)
2,500 VAC (Cutoff Current = 20mA), 1minute at room temperature and humidity
4
Isolation Resistance (Terminal-Mounting Plate) 500 VDC 100MWmin at room temperature and humidity
5
Leakage current 125/250V 60Hz
Voltage drop
0.5mA/1.0mA max
6
1.0V max
7
Safety agency approval temperatures
Operating temperature
Operating humidity
-25 to +85C(Refer to Derating Curve)
-40 to +85C(Refer to Derating Curve)
20 to 95%RH (Non condensing)
-40 to +85C/20 to 95%RH (Non condensing)
8
9
10
11
12
13
14
Storage temperature/humidity
Vibration
2
10 to 55Hz, 19.6m/s (2G), 3min. Period, 1hour each X, Y and Z axis
2
Impact
196.1m/s (20G), 11ms Once each X, Y and Z axis
Safety agency approvals
Case size (without projection) /Weight
UL1283, CSA C22.2 No.8 (C-UL), DIN EN60939 VDE0565 Teil3-1, ENEC (At only AC input)
53X41X92 mm [2.09X1.61X3.62 inches] (WXHXD) /300g max (Option : -D refer to external view)
Circuit Diagram
Derating Curve
Case
100
80
3
1
60
CY
CY
LOAD
LINE
40
20
2
4
0
-40
-30
-20
40
50 55 60
70
80
90
Ambient Temperature [C]
: Mounting Plate
CY : Line to ground capacitor
NA-1
NAH,NAC,NAM,NAP series
External view
As this product is adopted push-down type terminal block, this appearance is as follows.
1The terminal cover is retracted inside the unit.
2The screws for connecting the terminals are held in the up right position.
Standard Type
92
[3.62]
(2.5)
[0.1]
27
[1.06]
0.5
[3.23]
82
2-f4.8
2-Protection Earth
8
77
[0.19]
[0.31]
[3.03]
Mounting Hole
Input
Terminal
Output
Name Plate
Terminal
Output
Input
Terminal
Terminal
6-M4
Mounting Plate
Terminal cover
Terminal cover
¶ Closed the terminal cover
¶ Tolerance : 1 [ 0.04]
¶ Weight : 300g max
¶ Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]
¶ Case : PBT
¶ Dimensions in mm, [ ]=inches
¶ Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max
DIN rail installation Type
92
[3.62]
77
(11)
[0.43]
(2.5)
[0.1]
27
[1.06]
8
2-Protection Earth
[0.31]
[3.03]
Input
Terminal
Output
Name Plate
Terminal
Output
Input
Terminal
Terminal
6-M4
Mounting Plate
Terminal cover
Terminal cover
¶ Closed the terminal cover
¶ Tolerance : 1 [ 0.04]
¶ Weight : 300g max
¶ Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]
¶ Case : PBT
¶ Dimensions in mm, [ ]=inches
¶ Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max
DIN rail
Note when installing the EMI/EMC
¡
Filter on a DIN rail.
DIN rail
When the EMI/EMC Filter is grounded through
the DIN rail, the proper noise attenuation may not
be achieved.
Name Plate
Be sure to connect the protection earth (PE) of
the EMI/EMC Filter body to the earth.
It can connect the ground to either one only.
NA-5
相关型号:
©2020 ICPDF网 联系我们和版权申明