STMGFS154812-N2 [COSEL]
DC/DC CONVERTER 12V 16W;型号: | STMGFS154812-N2 |
厂家: | COSEL CO., LTD. |
描述: | DC/DC CONVERTER 12V 16W |
文件: | 总18页 (文件大小:2591K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC-DC Converters PCB Mount Value-added Type
Isolated
OCP
OVP
Remote
ON/OFF
Wide 4 :1
input
STMG-series
Feature
Isolated unit type DC-DC converter
Wide input voltage DC9-36V/DC18-76V
Various lineups
Available connector interface (option)
Available case cover (option)
Available DIN rail attachment (option)
Built in Overcurrent protection (recovery automatically)
Built in Overvoltage protection (STMG30/STMG80)
Built in Remote ON/OFF
Built in Output voltage adjustment (for single output, 10ꢀ)
Safety agency approvals
UL60950-1 C-UL EN62368-1 Complies (STMG15/STMG30)
UL62368-1 C-UL EN62368-1 Complies (STMG80)
CE marking
Low voltage Directive
RoHS Directive
5-year warranty (refer to Instruction Manual)
June 30, 2021
STMG-1
Ordering information
DC-DC Converters PCB Mount Value-added Type
STMGF
S
15
24
05 -O
5 6
STMGFS15
1
2
3
4
1Series name
2Single output
3Output wattage
4Input voltage
5Output voltage
6Optional
DIN rail installation type
(Option : N2)
-
G: Capacitor between
Input and Output is removed.
R: with Remote ON/OFF
(
Positive logic control)
J
: Input/Output Connector
JN1
N2
JN3
:
:
:
Connector with case cover
With DIN rail installation type
Connector with cover(plastic)
and DIN rail installation type
V : Output voltage setting
potentiometer externally
Connector with case cover
(Option : JN1)
-
Standard type
Connector type
(Option : J)
*When the option is set
specifications may vary.
-
*Please remove short piece on CN4 to enable remote ON/OFF function.
MODEL
STMGFS15243R3
STMGFS152405
STMGFS152412
STMGFS152415
MAX OUTPUT WATTAGE[W]
13.2
3.3
4
15
5
3
15.6
12
1.3
15
15
1
*1
VOLTAGE[V]
CURRENT[A]
DC OUTPUT
SPECIFICATIONS
MODEL
STMGFS15243R3
DC9 - 36
0.63typ
87typ
STMGFS152405
STMGFS152412
STMGFS152415
VOLTAGE[V]
*2
*2
INPUT
CURRENT[A]
0.71typ
88typ
5
0.73typ
89typ
12
0.70typ
89typ
15
EFFICIENCY[%]
VOLTAGE[V]
3.3
CURRENT[A]
4
3
1.3
1
LINE REGULATION[mV]
LOAD REGULATION[mV]
13.2max
60max
20max
60max
75max
100max
120max
200max
50max
80max
20max
48max
100max
100max
120max
150max
200max
150max
240max
48max
60max
120max
100max
120max
150max
200max
180max
290max
60max
0 to +60C 75max
RIPPLE[mVp-p]
*3
*3
-20 to +60
C
100max
0 to +60C 120max
RIPPLE NOISE[mVp-p]
OUTPUT
-20 to +60
C
200max
0 to +60C 50max
TEMPERATURE REGULATION[mV]
-20 to +60
C
80max
20max
*4
DRIFT[mV]
START-UP TIME[ms]
30max (Minimum input, Io=100ꢀ)
OUTPUT VOLTAGE ADJUSTMENT RANGE 2.97 - 3.63
4.50 - 5.50
4.97 - 5.14
10.80 - 13.20
11.85 - 12.25
13.50 - 16.50
14.83 - 15.33
*
]
5
OUTPUT VOLTAGE SETTING[V
3.29 - 3.41
PROTECTION
CIRCUIT AND
OTHERS
OVERCURRENT PROTECTION Works over 105ꢀ of rating and recovers automatically
REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF)
MODEL
STMGFS15483R3
STMGFS154805
STMGFS154812
STMGFS154815
MAX OUTPUT WATTAGE[W]
VOLTAGE[V]
CURRENT[A]
13.2
3.3
4
15
5
3
15.6
12
1.3
15
15
1
*1
DC OUTPUT
SPECIFICATIONS
MODEL
STMGFS15483R3
DC18 - 76
0.32typ
87typ
STMGFS154805
STMGFS154812
STMGFS154815
VOLTAGE[V]
*2
*2
INPUT
CURRENT[A]
0.36typ
88typ
5
0.37typ
88typ
12
0.35typ
89typ
15
EFFICIENCY[%]
VOLTAGE[V]
3.3
CURRENT[A]
4
3
1.3
1
LINE REGULATION[mV]
LOAD REGULATION[mV]
13.2max
60max
20max
60max
75max
100max
120max
200max
50max
80max
20max
48max
100max
100max
120max
150max
200max
150max
240max
48max
60max
120max
100max
120max
150max
200max
180max
290max
60max
0 to +60C 75max
RIPPLE[mVp-p]
*3
*3
-20 to +60
C
100max
0 to +60C 120max
RIPPLE NOISE[mVp-p]
OUTPUT
-20 to +60
C
200max
0 to +60C 50max
TEMPERATURE REGULATION[mV]
-20 to +60
C
80max
20max
*4
DRIFT[mV]
START-UP TIME[ms]
30max (Minimum input, Io=100ꢀ)
OUTPUT VOLTAGE ADJUSTMENT RANGE 2.97 - 3.63
4.50 - 5.50
4.97 - 5.14
10.80 - 13.20
11.85 - 12.25
13.50 - 16.50
14.83 - 15.33
*
5
OUTPUT VOLTAGE SETTING[V]
3.29 - 3.41
PROTECTION
CIRCUIT AND
OTHERS
OVERCURRENT PROTECTION Works over 105ꢀ of rating and recovers automatically
REMOTE ON/OFF
Provided (Negative logic L:ON, H:OFF)
June 30, 2021
STMG-2
STMGFS15
GENERAL SPECIFICATIONS
INPUT-RC-OUTPUT
ISOLATION INPUT-RC-FG
OUTPUT-FG
DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +70C, 20 to 95ꢀRH (Non condensing) (Refer to “Derating”), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 to 95ꢀRH (Non condensing), 9,000m (30,000feet) max
ENVIRONMENT
2
VIBRATION
10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis
2
IMPACT
196.1m/s (20G), 11ms, once each along X, Y and Z axis
SAFETY
OTHERS
AGENCY APPROVALS
CASE SIZE/WEIGHT
COOLING METHOD
UL60950-1, C-UL, EN62368-1 Complies
52×27×93mm [2.05×1.06×3.66 inches] (WXHXD) / 110g max (When the option is set, refer to the page STMG-4)
Convection/Forced air
*1 STMGFW15xx05/STMGFW15xx12/STMGFW15xx15 is available as single output, +10V/+24V/+30V
*2 Rated input 12V, 24V or 48V DC lo=100ꢀ
*3 Measured by 100MHz oscilloscpe or Ripple-Noise meter (Equivalent to KIKUSUI-GIKEN : RM103).
*4 Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C.
*5 Rated input voltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C.
*
Parailel operation with other model is not possible.
External view
Standard type
*External view of option G, R are the same as standard model.
External view of other type options, please refer to the page STMG-4.
Voltage Adjust
TB2
M3
TB1
M3
CN4
[f0.177]
2-f4.5
Mounting Hole
Point A
RC(
-)
2
1
RC(+)
-
+Vin
FG
Vin
-
Vout
+Vout
ꢀ.ꢀ
[0.22]
82 0.5
[3.23]
Name Plate
19.6 1.5
[0.77]
73.5 1.5
[2.89]
75.8 1.5
[2.98]
93
[3.66]
Terminal cover
*Tolerance
*Dimensions in mm, [ ]=inches
*Weight : 110g max
1
Mating
Connector
I/O Connector
CN4 B2B-XH
Terminal
Chain : SXH-001T-P0.6
Loose : BXH-001T-P0.6
Remote ON/OFF
XHP-2
*PCB material / thickness : FR-4 / 1.6mm
*Mounting plate : Iron (surface finishing : nickel plating) t=1.0 [0.04]
*Terminal block screw tightning torque M3 : 0.8N-m max
*CN4 has been installed short piece as factory setting (Except option R).
When remoto ON/OFF is used, please remove the installed short piece.
(Mfr.:J.S.T.)
June 30, 2021
STMG-3
STMGFS15
External view (Option type)
Connector type (
-J)
Case cover and connector type (-JN1)
*The specifications of terminal block
and Case cover type can not be set.
Voltage Adjust
CN1
CN4
Voltage Adjust
0.177]
Mounting Hole
CN1
[f
0ꢀ177]
Point A
2-f4ꢀ.
CN2
[f
2-f4.5
CN4
CN2
Mounting Hole
RC(
RC(+)
Vin
-
)
2
1
RC(
RC(+)
Vin
-
)
2
1
-
.
5
3
1
-
4
1
-Vout
+Vout
4
1
-Vout
+Vout
+Vin
FG
3
1
+Vin
FG
.ꢀ.
Name Plate
82 0ꢀ.
[3ꢀ23]
5.5
82 0.5
[3.23]
Name Plate
[0ꢀ22]
[0.22]
7.ꢀ8 1ꢀ.
75.8 1.5
[2.98]
[2ꢀ98]
93
93
[3ꢀ66]
[3.66]
DIN rail installation type (
-N2)
External voltage variable volume type (-V)
Voltage Adjust
CN5
2-f4.5
Mounting Hole
TB1
M3
TB1
M3
TB2
M3
TB2
M3
[f0.177]
CN4
CN4
Point A
Point A
RC(
-)
RC(
-)
2
1
2
1
3
1
RC(+)
RC(+)
-
Vin
-Vin
-
+
Vout
Vout
-Vout
+Vin
+Vin
FG
+Vout
FG
16.2 1.5
[0.64]
82 0.ꢀ
[3.23]
Name Plate
ꢀ.ꢀ
[0.22]
Name Plate
70.2 1.5
19.6 1.ꢀ
[0.77]
[2.77]
72.4 1.5
73.ꢀ 1.ꢀ
[2.89]
M4
[2.85]
84
93
FG
[3.31]
87.5
[3.44]
[3.66]
Terminal cover
Terminal cover
*Tolerance
1
Mating
Connector
I/O Connector
Terminal
*Dimensions in mm, [ ]=inches
*Weight : Standard & Connector type 110g max
Case cover & DIN rail installation type 120g max
*PCB material / thickness : FR-4 / 1.6mm
*Mounting plate : Iron (surface finishing : nickel plating) t=1.0 [0.04]
*Case : PBT
*Terminal block screw tightning torque M3 : 0.8N-m max
*CN4 has been installed jumper as factory setting (Except option R).
When remoto ON/OFF is used , please remove the installed jumper.
*Connector Type : Keep drawing current per pin below 2.5A for CN2.
Connector Type
Chain : SVH-21T-P1.1
Loose : BVH-21T-P1.1
Chain : SXH-001T-P0.6
Loose : BXH-001T-P0.6
Chain : SXH-001T-P0.6
Loose : BXH-001T-P0.6
Chain : SXH-001T-P0.6
Loose : BXH-001T-P0.6
CN1 B3P5-VH VHR-5N
Input
Connector Type
CN2 B4P-XH
CN4 B2B-XH
CN5 B3B-XH
XHP-4
XHP-2
XHP-3
Output
Remote ON/OFF
External voltage variable
volume type
(Mfr.:J.S.T.)
June 30, 2021
STMG-4
June 30, 2021
STMG-5
Ordering information
DC-DC Converters PCB Mount Value-added Type
STMGF
W
15
24
05 -O
5 6
STMGFW15
1
2
3
4
1Series name
2Dual output
3Output wattage
4Input voltage
5Output voltage
6Optional
G: Capacitor between
Input and Output is removed.
R: with Remote ON/OFF
DIN rail installation type
(Option : N2)
-
(
Positive logic control)
J
: Input/Output Connector
JN1
N2
JN3
:
:
:
Connector with case cover
With DIN rail installation type
Connector with cover(plastic)
and DIN rail installation type
*When the option is set
specifications may vary.
Standard type
Connector type
(Option : J)
Connector with case cover
(Option : JN1)
-
-
*Please remove short piece on CN4 to enable remote ON/OFF function.
MODEL
STMGFW152405 STMGFW152412 STMGFW152415 STMGFW154805 STMGFW154812 STMGFW154815
15 15.6 15 15 15.6 15
12 or +24 15 or +30 5 or +10 12 or +24 15 or +30
0.65 0.5 1.5 0.65 0.5
MAX OUTPUT WATTAGE[W]
*1
VOLTAGE[V]
CURRENT[A]
5 or +10
1.5
DC OUTPUT
SPECIFICATIONS
MODEL
STMGFW152405 STMGFW152412 STMGFW152415 STMGFW154805 STMGFW154812 STMGFW154815
VOLTAGE[V]
DC9 - 36
0.74typ
84typ
DC18 - 76
0.37typ
84typ
*2
*2
INPUT
CURRENT[A]
0.74typ
88typ
0.70typ
89typ
0.37typ
87typ
0.36typ
88typ
EFFICIENCY[%]
VOLTAGE[V]
5(+10)
1.5
12(+24)
0.65
15(+30)
0.5
5(+10)
12(+24)
0.65
15(+30)
0.5
CURRENT[A]
1.5
LINE REGULATION[mV]
40max
500max *5
250max
60max
600max
480max
100max
120max
150max
200max
150max
240max
50max
75max
750max
600max
100max
120max
150max
200max
180max
290max
60max
40max
500max *5
250max
100max
120max
150max
200max
50max
80max
50max
60max
600max
480max
100max
120max
150max
200max
150max
240max
50max
75max
750max
600max
100max
120max
150max
200max
180max
290max
60max
*3
*4
LOAD REGULATION[mV]
0 to +60C 100max
RIPPLE[mVp-p]
*6
*6
-20 to +60
C
120max
OUTPUT
0 to +60C 150max
RIPPLE NOISE[mVp-p]
-20 to +60
C
200max
0 to +60C 50max
TEMPERATURE REGULATION[mV]
-20 to +60
C
80max
50max
*7
DRIFT[mV]
START-UP TIME[ms]
30max (Minimum input, Io=100ꢀ)
5.24 11.76 12.50
OVERCURRENT PROTECTION Works over 105ꢀ of rating and recovers automatically
OUTPUT VOLTAGE SETTING[V]*8 4.93
-
-
14.60
-
15.51
4.93
-
5.24
11.76
-
12.50
14.60 - 15.51
PROTECTION
CIRCUIT AND
OTHERS
REMOTE ON/OFF
Provided (Negative logic L:ON, H:OFF)
INPUT-RC-OUTPUT
DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
ISOLATION INPUT-RC-FG
OUTPUT-FG
OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +70C, 20 to 95ꢀRH (Non condensing) (Refer to “Derating”), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 to 95ꢀRH (Non condensing), 9,000m (30,000feet) max
ENVIRONMENT
2
VIBRATION
10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis
2
IMPACT
196.1m/s (20G), 11ms, once each along X, Y and Z axis
SAFETY
OTHERS
AGENCY APPROVALS
CASE SIZE/WEIGHT
COOLING METHOD
UL60950-1, C-UL, EN62368-1 Complies
52X27X93mm [2.05X1.06X3.66 inches] (WXHXD) / 110g max (When the option is set, refer to the page STMG-7)
Convection/Forced air
*1 Single output +10V, +24V, +30V with no use of COM.
*2 Rated input 12V, 24V or 48V DC lo=100ꢀ
*8 Rated input voltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C.
Parailel operation with other model is not possible.
*
*3 Symmetrical loading from 5ꢀ to 100ꢀ.
*4 Symmetrical loading from 20ꢀ to 100ꢀ.
*5 Refer to the instruction manual 7.
*6 Measured by 100MHz oscilloscpe or Ripple-Noise meter (Equivalent to KIKUSUI-GIKEN :
RM103).
*7 Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C.
June 30, 2021
STMG-6
STMGFW15
External view
Standard type
Connector type (-J)
* External view of option G, R are the
same as standard model.
CN3
TB1
M3
TB2
M3
CN1
CN4
[
f
0.177]
[f
0.177]
Mounting Hole
CN4
2-f4.ꢀ
2-f4.5
Point A
Point A
CN2
Mounting Hole
RC(
-
)
2
1
RC(
RC(+)
Vin
-
)
2
1
RC(+)
4
-Vout
-
Vout
-
COM
5
3
1
-
Vin
1
4
COM
+Vout
+Vin
FG
COM
+Vout
+Vin
FG
1
5.5
[0.22]
82 0.5
[3.23]
5.5
[0.22]
82 0.5
Name Plate
Name Plate
[3.23]
93
19.6 1.5
[0.77]
[3.66]
73.5 1.5
[2.89]
93
[3.66]
Terminal cover
Case cover and connector type (
-JN1)
DIN rail installation type (-N2)
*The specifications of terminal block
and Case cover type can not be set.
CN3
TB1
M3
TB2
M3
CN1
[
f
0.177]
CN4
Point A
2-f4.5
CN4
CN2
Mounting Hole
RC(
-)
2
1
RC(
RC(+)
Vin
-
)
2
1
RC(+)
4
-Vout
-Vout
COM
+Vout
-Vin
-
5
COM
1
4
+Vin
FG
+Vin
3
1
COM
+Vout
1
FG
Name Plate
Name Plate
16.2 1.5
[0.64]
5.5
[0.22]
82 0.5
[3.23]
93
M4
FG
70.2 1.5
[2.77]
84
[3.66]
[3.31]
87.5
[3.44]
Terminal cover
*Tolerance
*Dimensions in mm, [ ]=inches
*Weight : Standard & Connector type 110g max
Case cover & DIN rail installation type 120g max
*PCB material / thickness : FR-4 / 1.6mm
*Mounting plate : Iron (surface finishing : nickel plating) t=1.0 [0.04]
*Case : PBT
*Terminal block screw tightning torque M3 : 0.8N-m max
*CN4 has been installed jumper as factory setting (Except option R).
When remoto ON/OFF is used , please remove the installed jumper.
*Connector Type : Keep drawing current per pin below 2.5A for CN2,CN3.
1
Mating
Connector
I/O Connector
Terminal
Connector Type
Chain : SVH-21T-P1.1
Loose : BVH-21T-P1.1
Chain : SXH-001T-P0.6
Loose : BXH-001T-P0.6
Chain : SXH-001T-P0.6
Loose : BXH-001T-P0.6
CN1 B3P5-VH VHR-5N
CN2,
Input
Connector Type
B4B-XH
XHP-4
Output
CN3
Remote ON/OFF
CN4 B2B-XH
XHP-2
(Mfr.:J.S.T.)
June 30, 2021
STMG-7
Ordering information
DC-DC Converters PCB Mount Value-added Type
STMGF
S
30
24
05 -O
5 6
STMGFS30
1
2
3
4
1Series name
2Single output
3Output wattage
4Input voltage
5Output voltage
6Optional
DIN rail installation type
(Option : N2)
-
G: Capacitor between
Input and Output is removed.
R: with Remote ON/OFF
(
Positive logic control)
J
: Input/Output Connector
N1
N2
N3
:
:
:
With case cover
With DIN rail installation type
With cover(plastic)
and DIN rail installation type
With case cover
(Option : N1)
Standard type
Connector type
(Option : J)
V : Output voltage setting
potentiometer externally
*When the option is set
specifications may vary.
-
-
*Please remove short piece on CN4 to enable remote ON/OFF function.
MODEL
STMGFS30243R3
STMGFS302405
STMGFS302412
STMGFS302415
MAX OUTPUT WATTAGE[W]
24.75
3.3
7.5
30
5
6
30
12
2.5
30
15
2
*1
VOLTAGE[V]
CURRENT[A]
DC OUTPUT
SPECIFICATIONS
MODEL
STMGFS30243R3
DC9 - 36
1.16typ
89typ
STMGFS302405
STMGFS302412
STMGFS302415
VOLTAGE[V]
*2
*2
INPUT
CURRENT[A]
1.39typ
90typ
5
1.40typ
89typ
12
1.40typ
89typ
15
EFFICIENCY[%]
VOLTAGE[V]
3.3
CURRENT[A]
7.5
6
2.5
2
LINE REGULATION[mV]
LOAD REGULATION[mV]
13.2max
60max
20max
60max
75max
100max
120max
200max
50max
80max
20max
48max
100max
100max
120max
150max
200max
150max
240max
48max
60max
120max
100max
120max
150max
200max
180max
290max
60max
0 to +60C 75max
RIPPLE[mVp-p]
*3
*3
-20 to +60
C
100max
0 to +60C 120max
RIPPLE NOISE[mVp-p]
OUTPUT
-20 to +60
C
200max
0 to +60C 50max
TEMPERATURE REGULATION[mV]
-20 to +60
C
80max
20max
*4
DRIFT[mV]
START-UP TIME[ms]
30max (Minimum input, Io=100ꢀ)
OUTPUT VOLTAGE ADJUSTMENT RANGE 2.97 - 3.63
4.50 - 5.50
4.97 - 5.14
10.80 - 13.20
11.85 - 12.25
13.50 - 16.50
14.83 - 15.33
*5
OUTPUT VOLTAGE SETTING[V]
3.29 - 3.41
OVERCURRENT PROTECTION Works over 105ꢀ of rating and recovers automatically
PROTECTION
CIRCUIT AND OVERVOLTAGE PROTECTION[V] Works over 120 to 160ꢀ of rating
OTHERS
REMOTE ON/OFF
Provided (Negative logic L:ON, H:OFF)
MODEL
STMGFS30483R3
STMGFS304805
STMGFS304812
STMGFS304815
MAX OUTPUT WATTAGE[W]
VOLTAGE[V]
CURRENT[A]
24.75
3.3
7.5
30
5
6
30
12
2.5
30
15
2
*1
DC OUTPUT
SPECIFICATIONS
MODEL
STMGFS30483R3
DC18 - 76
0.58typ
89typ
STMGFS304805
STMGFS304812
STMGFS304815
VOLTAGE[V]
*2
*2
INPUT
CURRENT[A]
0.70typ
90typ
5
0.70typ
89typ
12
0.70typ
89typ
15
EFFICIENCY[%]
VOLTAGE[V]
3.3
CURRENT[A]
7.5
6
2.5
2
LINE REGULATION[mV]
LOAD REGULATION[mV]
13.2max
60max
20max
60max
75max
100max
120max
200max
50max
80max
20max
48max
100max
100max
120max
150max
200max
150max
240max
48max
60max
120max
100max
120max
150max
200max
180max
290max
60max
0 to +60C 75max
RIPPLE[mVp-p]
*3
*3
-20 to +60
C
100max
0 to +60C 120max
RIPPLE NOISE[mVp-p]
OUTPUT
-20 to +60
C
200max
0 to +60C 50max
TEMPERATURE REGULATION[mV]
-20 to +60
C
80max
20max
*4
DRIFT[mV]
START-UP TIME[ms]
30max (Minimum input, Io=100ꢀ)
OUTPUT VOLTAGE ADJUSTMENT RANGE 2.97 - 3.63
4.50 - 5.50
4.97 - 5.14
10.80 - 13.20
11.85 - 12.25
13.50 - 16.50
14.83 - 15.33
*5
OUTPUT VOLTAGE SETTING[V]
3.29 - 3.41
OVERCURRENT PROTECTION Works over 105ꢀ of rating and recovers automatically
PROTECTION
CIRCUIT AND OVERVOLTAGE PROTECTION[V] Works over 120 to 160ꢀ of rating
OTHERS
REMOTE ON/OFF
Provided (Negative logic L:ON, H:OFF)
June 30, 2021
STMG-8
STMGFS30
GENERAL SPECIFICATIONS
INPUT-RC-OUTPUT
ISOLATION INPUT-RC-FG
OUTPUT-FG
DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +70C, 20 to 95ꢀRH (Non condensing) (Refer to “Derating”), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 to 95ꢀRH (Non condensing), 9,000m (30,000feet) max
ENVIRONMENT
2
VIBRATION
10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis
2
IMPACT
196.1m/s (20G), 11ms, once each along X, Y and Z axis
SAFETY
OTHERS
AGENCY APPROVALS
CASE SIZE/WEIGHT
COOLING METHOD
UL60950-1, C-UL, EN62368-1 Complies
52×27×117mm [2.05×1.06×4.61 inches] (WXHXD) / 140g max (When the option is set, refer to the page STMG-10)
Convection/Forced air
*1 STMGFW30xx05/STMGFW30xx12/STMGFW30xx15 is available as single output, +10V/+24V/+30V
*2 Rated input 12V, 24V or 48V DC lo=100ꢀ
*3 Measured by 100MHz oscilloscpe or Ripple-Noise meter (Equivalent to KIKUSUI-GIKEN : RM103).
*4 Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C.
*5 Rated input voltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C.
*
Parailel operation with other model is not possible.
External view
Standard type
*External view of option G, R are the same as standard model.
External view of other type options, please refer to the page STMG-10.
Voltage Adjust
TB2
M3
TB1
M3
[f0.177]
2-f4.5
CN4
Point A
Mounting Hole
RC(
-)
2
1
RC(+)
-
Vin
-
Vout
+Vin
+
Vout
FG
5.5
106 0.5
Name Plate
[0.22]
[4.17]
19.6 1.5
[0.77]
97.5 1.5
[3.84]
99.8 1.5
[3.93]
117
[4.61]
Terminal cover
*Tolerance
*Dimensions in mm, [ ]=inches
*Weight : 140g max
1
Mating
Connector
I/O Connector
CN4 B2B-XH
Terminal
Chain : SXH-001T-P0.6
Loose : BXH-001T-P0.6
Remote ON/OFF
XHP-2
*PCB material / thickness : FR-4 / 1.6mm
*Mounting plate : Iron (surface finishing : nickel plating) t=1.0 [0.04]
*Terminal block screw tightning torque M3 : 0.8N-m max
*CN4 has been installed jumper as factory setting (Except option R).
When remoto ON/OFF is used , please remove the installed jumper.
(Mfr.:J.S.T.)
June 30, 2021
STMG-9
STMGFS30
External view (Option type)
Connector type (
-J)
Case cover type (
-N1)
Voltage Adjust
0.177]
Mounting Hole
TB1
TB2
M3
Voltage Adjust
0.177]
Mounting Hole
CN1
[f
CN4
M3
2-φ4.5
[f
2-f4.5
CN2
CN4
Point A
RC(
-
)
2
1
RC(
RC(+)
Vin
+Vin
FG
-
)
2
1
5
3
1
RC(+)
-
Vin
-
-
Vout
1
4
-Vout
+Vout
+Vin
+
Vout
FG
Terminal Cover
ꢀ.ꢀ
106 0.5
[4.17]
Terminal Cover
Name Plate
5.5
[0.22]
106 0.5
[4.17]
99.8 1.5
Name Plate
[0.22]
19.6 1.5
[0.77]
[3.93]
97.5 1.5
[3.84]
117
[4.61]
99.8 1.5
[3.93]
117
[4.61]
DIN rail installation type (
-N2)
External voltage variable volume type (-V)
CN5
TB1
M3
Voltage Adjust
TB2
M3
TB2
M3
TB1
M3
[f
0.177]
2-f4.5
CN4
Point A
CN4
Point A
Mounting Hole
RC(
RC(+)
Vin
+Vin
FG
-
)
2
RC(
-)
2
1
3
1
1
RC(+)
-
-
Vin
-
V
out
-
+
Vout
Vout
+Vin
FG
+Vout
Name Plate
16 1.5
[0.63]
5.5
106 0.5
[4.17]
Name Plate
94.1 1.5
[0.22] 19.6 1.5
[0.77]
[3.70] 96.5 1.5
97.5 1.5
M4
FG
[3.84]
[3.80] 108.5
117
[4.61]
[4.27]
112
[4.41]
Terminal cover
Terminal cover
*Tolerance
1
Mating
Connector
I/O Connector
Terminal
*Dimensions in mm, [ ]=inches
*Weight : Standard & Connector type 140g max
Case cover & DIN rail installation type 160g max
*PCB material / thickness : FR-4 / 1.6mm
*Mounting plate : Iron (surface finishing : nickel plating) t=1.0 [0.04]
*Case : PBT
*Terminal block screw tightning torque M3 : 0.8N-m max
*CN4 has been installed jumper as factory setting (Except option R).
When remoto ON/OFF is used, please remove the installed jumper.
*Connector Type : Keep drawing current per pin below 5A for CN2.
Connector Type
Chain : SVH-21T-P1.1
Loose : BVH-21T-P1.1
Chain : SVH-21T-P1.1
Loose : BVH-21T-P1.1
Chain : SXH-001T-P0.6
Loose : BXH-001T-P0.6
Chain : SXH-001T-P0.6
Loose : BXH-001T-P0.6
CN1 B3P5-VH VHR-5N
Input
Connector Type
CN2 B4P-VH
CN4 B2B-XH
CN5 B3B-XH
VHR-4N
XHP-2
XHP-3
Output
Remote ON/OFF
External voltage variable
volume type
(Mfr.:J.S.T.)
June 30, 2021
STMG-10
June 30, 2021
STMG-11
Ordering information
DC-DC Converters PCB Mount Value-added Type
STMGF
W
30
24
05 -O
5 6
STMGFW30
1
2
3
4
1Series name
2Dual output
3Output wattage
4Input voltage
5Output voltage
6Optional
G: Capacitor between
Input and Output is removed.
R: with Remote ON/OFF
DIN rail installation type
(Option : N2)
-
(
Positive logic control)
J
: Input/Output Connector
N1
N2
N3
:
:
:
With case cover
With DIN rail installation type
With cover(plastic)
and DIN rail installation type
*When the option is set
specifications may vary.
Standard type
Connector type
(Option : J)
With case cover
(Option : N1)
-
-
*Please remove short piece on CN4 to enable remote ON/OFF function.
MODEL
STMGFW302405 STMGFW302412 STMGFW302415 STMGFW304805 STMGFW304812 STMGFW304815
20 30 30 20 30 30
12 or +24 15 or +30 5 or +10 12 or +24 15 or +30
1.25 1.25
MAX OUTPUT WATTAGE[W]
*1
VOLTAGE[V]
CURRENT[A]
5 or +10
DC OUTPUT
2
1
2
1
SPECIFICATIONS
MODEL
STMGFW302405 STMGFW302412 STMGFW302415 STMGFW304805 STMGFW304812 STMGFW304815
VOLTAGE[V]
DC9 - 36
0.98typ
85typ
DC18 - 76
0.49typ
85typ
*2
*2
INPUT
CURRENT[A]
1.42typ
88typ
1.44typ
87typ
0.71typ
88typ
0.72typ
87typ
EFFICIENCY[%]
VOLTAGE[V]
5(+10)
2
12(+24)
1.25
15(+30)
1
5(+10)
2
12(+24)
1.25
15(+30)
1
CURRENT[A]
LINE REGULATION[mV]
40max
500max *5
250max
60max
600max
480max
100max
120max
150max
200max
150max
240max
50max
75max
750max
600max
100max
120max
150max
200max
180max
290max
60max
40max
500max *5
250max
100max
120max
150max
200max
50max
80max
50max
60max
600max
480max
100max
120max
150max
200max
150max
240max
50max
75max
750max
600max
100max
120max
150max
200max
180max
290max
60max
*3
*4
LOAD REGULATION[mV]
0 to +60C 100max
RIPPLE[mVp-p]
*6
*6
-20 to +60
C
120max
OUTPUT
0 to +60C 150max
RIPPLE NOISE[mVp-p]
-20 to +60
C
200max
0 to +60C 50max
TEMPERATURE REGULATION[mV]
-20 to +60
C
80max
50max
*7
DRIFT[mV]
START-UP TIME[ms]
30max (Minimum input, Io=100ꢀ)
5.24 11.76 12.50
OVERCURRENT PROTECTION Works over 105ꢀ of rating and recovers automatically
OUTPUT VOLTAGE SETTING[V]*8 4.93
-
-
14.60
-
15.51
4.93
-
5.24
11.76
-
12.50
14.60 - 15.51
PROTECTION
CIRCUIT AND OVERVOLTAGE PROTECTION[V] Works over 120 to 160ꢀ of rating (Total of +V and -V)
OTHERS
REMOTE ON/OFF
Provided (Negative logic L:ON, H:OFF)
INPUT-RC-OUTPUT
DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
ISOLATION INPUT-RC-FG
OUTPUT-FG
OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +70C, 20 to 95ꢀRH (Non condensing) (Refer to “Derating”), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 to 95ꢀRH (Non condensing), 9,000m (30,000feet) max
ENVIRONMENT
2
VIBRATION
10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis
2
IMPACT
196.1m/s (20G), 11ms, once each along X, Y and Z axis
SAFETY
OTHERS
AGENCY APPROVALS
CASE SIZE/WEIGHT
COOLING METHOD
UL60950-1, C-UL, EN62368-1 Complies
52X27X117mm [2.05×1.06×4.61 inches] (WXHXD) / 140g max (When the option is set, refer to the page STMG-13)
Convection/Forced air
*1 Single output +10V, +24V, +30V with no use of COM.
*2 Rated input 12V, 24V or 48V DC lo=100ꢀ
*3 Symmetrical loading from 5ꢀ to 100ꢀ.
*4 Symmetrical loading from 20ꢀ to 100ꢀ.
*5 Refer to the instruction manual 7.
*7 Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C.
*8 Rated input voltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C.
*
Parailel operation with other model is not possible.
*6 Measured by 100MHz oscilloscpe or Ripple-Noise meter (Equivalent to KIKUSUI-GIKEN :
RM103).
June 30, 2021
STMG-12
STMGFW30
External view
Standard type
Connector type (-J)
* External view of option G, R are the
same as standard model.
CN1
TB2
M3
TB1
[
f
0ꢀ177]
2-f4ꢀ.
[
f
0.177]
CN4
CN2
2-f4.5
Point A
CN4
M3
Point A
Mounting Hole
Mounting Hole
RC(
RC(+)
Vin
-
)
2
RC(
RC(+)
Vin
-
)
2
1
1
-Vout
.
-
-Vout
-
1
3
COM
COM
3
1
+Vin
+Vin
+Vout
+Vout
FG
FG
.ꢀ.
106 0ꢀ.
[4ꢀ17]
Name Plate
5.5
106 0.5
[4.17]
Name Plate
[0ꢀ22]
[0.22] 19.6 1.5
[0.77]
117
97.5 1.5
[3.84]
[4ꢀ61]
117
[4.61]
Terminal cover
Case cover type (
-N1)
DIN rail installation type (-N2)
TB2
M3
TB1
M3
TB2
M3
TB1
M3
CN4
[
f
0.±77]
Point A
2-f4.5
CN4
Mounting Hole
RC(
-)
2
1
RC(
-)
2
±
RC(+)
RC(+)
-Vout
COM
+Vout
-Vout
COM
+Vout
-Vin
-
Vin
Vin
+Vin
FG
+
FG
Name Plate
16.3 1.5
Terminal Cover
5.5
±06±0.5
Terminal Cover
Name Plate
[0.64]
[4.17]
[0.22] ±9.6±±.5
[0.77]
94.1 1.5
[3.70] 108.5
M4
FG
97.5±±.5
[4.27] 112
[3.84] 117
[4.61]
[4.41]
Terminal cover
*Tolerance
1
Mating
Connector
I/O Connector
Terminal
*Dimensions in mm, [ ]=inches
*Weight : Standard & Connector type 140g max
Case cover & DIN rail installation type 160g max
*PCB material / thickness : FR-4 / 1.6mm
*Mounting plate : Iron (surface finishing : nickel plating) t=1.0 [0.04]
*Case : PBT
*Terminal block screw tightning torque M3 : 0.8N-m max
*CN4 has been installed jumper as factory setting (Except option R).
When remoto ON/OFF is used, please remove the installed jumper.
*Connector Type : Keep drawing current per pin below 5A for CN2.
Connector Type
Chain : SVH-21T-P1.1
Loose : BVH-21T-P1.1
Chain : SVH-21T-P1.1
Loose : BVH-21T-P1.1
Chain : SXH-001T-P0.6
Loose : BXH-001T-P0.6
CN1 B3P5-VH VHR-5N
Input
Connector Type
CN2 B3P-VH
CN4 B2B-XH
VHR-3N
XHP-2
Output
Remote ON/OFF
(Mfr.:J.S.T.)
June 30, 2021
STMG-13
Ordering information
DC-DC Converters PCB Mount Value-added Type
STMGF
S
30
24
05 -O
5 6
STMGFS80
1
2
3
4
1Series name
2Single output
3Output wattage
4Input voltage
5Output voltage
6Optional
R: with Remote ON/OFF
(Positive logic control)
Standard type
*When the option is set
specifications may vary.
*Please remove short piece on CN3 to enable remote ON/OFF function.
MODEL
STMGFS80243R3
STMGFS802405
STMGFS802412
STMGFS802415
MAX OUTPUT WATTAGE[W]
59.4
3.3
18
80
5
16
80.4
12
6.7
81
15
5.4
VOLTAGE[V]
CURRENT[A]
DC OUTPUT
SPECIFICATIONS
MODEL
STMGFS80243R3
DC9 - 36
2.75typ
90typ
STMGFS802405
STMGFS802412
STMGFS802415
VOLTAGE[V]
*1
*1
CURRENT[A]
3.70typ
90typ
5
3.64typ
92typ
12
3.67typ
92typ
15
INPUT
EFFICIENCY[%]
VOLTAGE[V]
3.3
CURRENT[A]
18
16
6.7
5.4
LINE REGULATION[mV]
LOAD REGULATION[mV]
13.2max
60max
20max
60max
75max
100max
200max
75max
150max
250max
50max
80max
20max
48max
100max
100max
120max
240max
100max
150max
270max
150max
240max
48max
60max
120max
100max
120max
240max
100max
150max
270max
180max
290max
60max
0 to +60C 75max
-20 to +60
lo=0 to 10% 200max
0 to +60C 75max
-20 to +60
RIPPLE[mVp-p]
C
100max
*2
*2
OUTPUT
RIPPLE NOISE[mVp-p]
C
150max
lo=0 to 10% 250max
0 to +60C 50max
-20 to +60
TEMPERATURE REGULATION[mV]
C
80max
20max
*3
DRIFT[mV]
START-UP TIME[ms]
30max (Minimum input, Rated load)
OUTPUT VOLTAGE ADJUSTMENT RANGE 2.97 - 3.63
4.50 - 5.50
4.97 - 5.14
10.80 - 13.20
11.85 - 12.25
13.50 - 16.50
14.83 - 15.33
*4
OUTPUT VOLTAGE SETTING[V]
3.29 - 3.41
OVERCURRENT PROTECTION Works over 105ꢀ of rating and recovers automatically
PROTECTION
CIRCUIT AND OVERVOLTAGE PROTECTION Works over 115 to 140ꢀ of rating
OTHERS
REMOTE ON/OFF
Provided (Negative logic L:ON, H:OFF)
MODEL
STMGFS80483R3
STMGFS804805
STMGFS804812
STMGFS804815
MAX OUTPUT WATTAGE[W]
VOLTAGE[V]
CURRENT[A]
59.4
3.3
18
80
5
16
80.4
12
6.7
81
15
5.4
DC OUTPUT
SPECIFICATIONS
MODEL
STMGFS80483R3
DC18 - 76
1.38typ
90typ
STMGFS804805
STMGFS804812
STMGFS804815
VOLTAGE[V]
*1
*1
INPUT
CURRENT[A]
1.85yp
90typ
5
1.82typ
92typ
12
1.83typ
92typ
15
EFFICIENCY[%]
VOLTAGE[V]
3.3
CURRENT[A]
18
16
6.7
5.4
LINE REGULATION[mV]
LOAD REGULATION[mV]
13.2max
60max
20max
60max
75max
100max
200max
75max
150max
250max
50max
80max
20max
48max
100max
100max
120max
240max
100max
150max
270max
150max
240max
48max
60max
120max
100max
120max
240max
100max
150max
270max
180max
290max
60max
0 to +60C 75max
-20 to +60C 100max
lo=0 to 10% 200max
0 to +60C 75max
-20 to +60C 150max
lo=0 to 10% 250max
0 to +60C 50max
-20 to +60C 80max
RIPPLE[mVp-p]
*2
*2
OUTPUT
RIPPLE NOISE[mVp-p]
TEMPERATURE REGULATION[mV]
*3
DRIFT[mV]
20max
START-UP TIME[ms]
30max (Minimum input, Rated load)
OUTPUT VOLTAGE ADJUSTMENT RANGE 2.97 - 3.63
4.50 - 5.50
4.97 - 5.14
10.80 - 13.20
11.85 - 12.25
13.50 - 16.50
14.83 - 15.33
*4
OUTPUT VOLTAGE SETTING[V]
3.29 - 3.41
OVERCURRENT PROTECTION Works over 105ꢀ of rating and recovers automatically
PROTECTION
CIRCUIT AND OVERVOLTAGE PROTECTION Works over 115 to 140ꢀ of rating
OTHERS
REMOTE ON/OFF
Provided (Negative logic L:ON, H:OFF)
June 30, 2021
STMG-14
STMGFS80
GENERAL SPECIFICATIONS
INPUT-RC-OUTPUT
ISOLATION INPUT-RC-FG
OUTPUT-FG
DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MWmin (20 15C)
OPERATING TEMP.,HUMID.AND ALTITUDE -20 to +70C, 20 to 95ꢀRH (Non condensing) (Refer to “Derating”), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 to 95ꢀRH (Non condensing), 9,000m (30,000feet) max
ENVIRONMENT
2
VIBRATION
10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis
2
IMPACT
196.1m/s (20G), 11ms, once each along X, Y and Z axis
SAFETY
OTHERS
AGENCY APPROVALS
CASE SIZE/WEIGHT
COOLING METHOD
UL62368-1, C-UL(CSA62368-1), EN62368-1 Complies
52×29×117mm [2.05×1.14×4.61 inches] (WXHXD) / 170g max
Convection/Forced air
*1 Rated input 12V, 24V or 48V DC lo=100ꢀ
*2 Measured by 100MHz oscilloscpe or Ripple-Noise meter (Equivalent to KIKUSUI-GIKEN : RM103).
*3 Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C.
*4 Rated input voltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C.
*
Parailel operation with other model is not possible.
External view
Standard type
*External view of option R is the same as standard model.
2-f4.5[2-f0.18]
Name plate
CN3
TB1
M3
Mounting Hole
PointA
Voltage Adjust
RC(–)
RC(+)
2
1
–Vin
+Vin
FG
–Vout
+Vout
8
TB2
M4
[0.32]
5.5
106±0.5
[4.17]
108.8
[4.28]
[0.22]
110.8
[4.37]
117
[4.61]
Terminal cover
*Tolerance
*Dimensions in mm, [ ]=inches
1
Mating
Connector
I/O Connector
Terminal
*Weight : 170g max
*PCB material / thickness : FR-4 / 1.6mm
Chain : SXH-001T-P0.6
Loose : BXH-001T-P0.6
Remote ON/OFF
CN3 B2B-XH
XHP-2
*Mounting plate : Iron (surface finishing : nickel plating) t=1.0 [0.04]
*Terminal block screw tightning torque M3 : 0.8N-m max
M4 : 1.6N-m max
(Mfr.:J.S.T.)
*CN3 has been installed jumper as factory setting (Except option R).
When remoto ON/OFF is used , please remove the installed jumper.
June 30, 2021
STMG-15
STMG-series
Assembling and Installation Method
Installation
(A)
(B)
(C)
(D)
(E)
TB1
(Input)
TB1
TB1
(Input)
(Input)
TB1
(Input)
TB1
(Input)
Normal mounting
Derating curve varies depending on the mounting direction.Refer to “Derating”
¡
¡
Please note that a power supply and chassis will become hot depending on mounting direction or operating condition.
In case of metal chassis, keep the distance between d1 for to
insulate between lead of component and metal chassis. If it is
less than d1, insert the insulation sheet between power supply
and metal chassis.
¡
d1=4mm min.
Derating
STMGFS80 Derating curve for input voltage
¿
100
80
70
0
0
9
12
18
36
36
76
18 24
Input Voltage [V]
STMGFS15/STMGFW15 Ambient temperature derating curve
¿
¡Specifications for ripple and ripple noise changese in the shaded area.
¡In the case of Convection Cooling
100
75
100
75
Natural Convection
Mounting Method A-E
50
50
Natural Convection
Mounting Method A-E
0
-20
0
-20
0
20
40
60
70
80
0
20
40
50
60
80
Ambient temperature Ta [C]
Ambient temperature Ta [C]
(1) Standard type (No Case cover type)
(2) Case cover type
June 30, 2021
STMG-16
STMG-series
Derating
In the case of Forced Air Cooling
¡
ꢀ Inꢀcaseꢀofꢀforcedꢀairꢀcooling,ꢀpleaseꢀhaveꢀsufficientꢀventilationꢀtoꢀkeepꢀtheꢀtemperatureꢀofꢀpointꢀAꢀinꢀInstructionꢀManual5ꢀatꢀ105 or below.
C
Please also make sure that the ambient temperature does not exceed the range shown in below.
100
100
75
Forced air
(0.5m3/min)
50
50
Forced air
(0.5m3/min)
0
0
-20
-20
0
20
40
60
70
80
0
20
40
50
60
80
Ambient temperature Ta [C]
Ambient temperature Ta [C]
(1) Standard type (No Case cover type)
(2) Case cover type
STMGFS30/STMGFW30 Ambient temperature derating curve
¿
Specificationsꢀforꢀrippleꢀandꢀrippleꢀnoiseꢀchangeseꢀinꢀtheꢀshadedꢀarea.
¡
In the case of Convection Cooling
¡
C B,D
E
B,C
E
A
100
75
A
D
75
50
25
0
50
25
0
-20
0
20
30
40
60
70
80
-20
0
20
40
60
70
80
25
35
Ambient temperature Ta [C]
(1) Standard type (No Case cover type)
Ambient temperature Ta [C]
(2) Case cover type
In the case of Forced Air Cooling
¡
ꢀ Inꢀcaseꢀofꢀforcedꢀairꢀcooling,ꢀpleaseꢀhaveꢀsufficientꢀventilationꢀtoꢀkeepꢀtheꢀtemperatureꢀofꢀpointꢀAꢀinꢀInstructionꢀManual5ꢀatꢀ105 or below.
C
Please also make sure that the ambient temperature does not exceed the range shown in below.
C B,D
E
A
100
75
50
25
0
Forced air
50
Forced air
(0.5m3/min)
(0.5m3/min)
-20
0
20
30
40
60
70
80
0
-20
0
20
40
60
70
80
25
35
Ambient temperature Ta [C]
(1) Standard type (No Case cover type)
Ambient temperature Ta [C]
(2) Case cover type
June 30, 2021
STMG-17
STMG-series
Derating
STMGFS80 Ambient temperature derating curve (Reference value)
¿
Specificationsꢀforꢀrippleꢀandꢀrippleꢀnoiseꢀchangeseꢀinꢀtheꢀshadedꢀarea.
¡
In the case of Convection Cooling
¡
When using the product, make sure that the temperature at point A is below the temperature shown in the instruction manual 5.
Please also make sure that the ambient temperature does not exceed 70
.
C
100
A - E
75
50
25
0
-20
0
20
40
60
70
80
Ambient temperature Ta [C]
Derating characteristics during natural air cooling (for reference)
Instruction Manual
◆ It is neccessary to read the “Instruction Manual” and “Before using our product” before you use our product.
Instruction Manual
https://www.cosel.co.jp/redirect/catalog/en/STMGFS/
https://www.cosel.co.jp/redirect/catalog/en/STMGFW/
https://en.cosel.co.jp/technical/caution/index.html
Instruction Manual
STMGFS
STMGFW
NOTICE
Before using our product
Basic Characteristics Data
Series/Parailel
Switching
Input
current
[A]
Inrush
current
protection
PCB/Pattern*4
operation availability
frequency
[kHz]
(reference)
Model
Circuit method
Single Double
Series
Parailel
sided sided operation operation
Material
STMGF15 Flyback converter
STMGF30 Forward converter
445-495
380-460
-
-
-
glass fabric base,epoxy resin
glass fabric base,epoxy resin
glass fabric base,epoxy resin
Yes
Yes
Yes
Yes
Yes
Yes
*1
*1
*1
*2
*2
*2
STMGFS80 Flyback converter 100-1500*3
*1 Refer to Specification.
*2 Refer to Instruction Manual.
*3 The value changes depending on input and load.
*4 MG series with the power supply unit, please refer to the basic characteristics of the MG series data.
June 30, 2021
STMG-18
相关型号:
©2020 ICPDF网 联系我们和版权申明