SSPA [CPI]
Rack-Mount Solid State Power Amplifiers; 机架式固态功率放大器![SSPA](http://pdffile.icpdf.com/pdf1/p00142/img/icpdf/SSPA_785280_icpdf.jpg)
型号: | SSPA |
厂家: | ![]() |
描述: | Rack-Mount Solid State Power Amplifiers |
文件: | 总2页 (文件大小:199K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
Rack-Mount Solid State Power Amplifiers
CPI Solid Inside and Out
C-Band
High Power SSPAs
Model S5CI Series 125
and 225 Watt C-band
Solid State Power
Amplifiers—Efficient
and Compact With CPI
Brick Inside.
CPI-Built RF Brick Inside
Global Applications
With CPI-built RF brick inside and plenty
of thermal margin, SSPA is rock-solid, highly
efficient and easy to maintain. Provides up
to 125 or 225 watts of power in a 5.25"
rack-mountable unit covering the
Meets International Safety Standards
EN-60950 and EN-60215, Electromagnetic
Compatibility 2004/108/EC and Harmonic
Standard EN-61000-3-2 to satisfy worldwide
requirements.
5.850 - 6.425 GHz frequency band.
Worldwide Support
Multi-Carrier Digital Operation
Highly linear: excellent AM/PM, phase noise
and spectral regrowth performance.
Backed by over three decades of satellite
communications experience, and CPI’s
worldwide 24-hour customer support network
that includes sixteen regional factory
service centers.
Simple to Operate
User-friendly microprocessor-controlled logic
with integrated RS422/485 computer interface,
digitally controlled attenuator, and optional
Ethernet interface.
811 Hansen Way
P.O. Box 51625, Palo Alto, CA 94303
tel: +1 (650) 846-3803
fax: +1 (650) 424-1744
e-mail: marketing@satcom.cpii.com
www.cpii.com/satcom
C-Band
SPECIFICATIONS, S5CI Rack-Mount SSPA
Electrical
Electrical (continued)
O P T I O N S :
Frequency Range
5.850 to 6.425 GHz (to 6.725 GHz optional)
Group Delay
0.03 ns/MHz linear max.
2
(in any 80 MHz band)
0.003 ns/MHz parabolic max.
• 1 RU Remote
Control Panel
RF Output
Saturated% min.
P1dB% min.
1.0 ns pk-pk ripple max.
125 W (50.97 dBm) or 225 W (53.50 dBm)1
100 W (50.0 dBm) or 200 W (53.0 dBm)1
Primary Power
100-240 VAC 10ꢀ% single phase;
47-63 Hz
• Redundant and
Power Combined
Subsystems
Power Consumption
800 W typ. for 125 W SSPA;
1500 W typ. for 225 W SSPA
Small Signal Gain (at max.
Gain Adjustment Range
Gain Setting Resolution
70 dB min. (at max. gain setting)
23 dB
• L-Band BUC
Power Factor
0.95 min.
0.1 dB
RF Output Monitor
-55 dB 3 nom. wrt output
• Extended
Frequency Range
(to 6.725 GHz)
Gain Stability
Over -10°C to +50°C
At constant temp. and drive
Environmental (Operating)
1.5 dB
0.25 dB
Ambient Temperature
Relative Humidity
Altitude
0°C to +50°C operating
• RF Input and
Output Monitors
Small Signal Gain Slope
0.04 dB/MHz max.
95ꢀ non-condensing
Small Signal Gain Variation
0.3 dB pk-pk across any 40 MHz band;
1.5 dB pk-pk across 575 MHz
10%000 ft. with standard adiabatic
derating of 2°C/1000 ft.% operating;
50%000 ft.% non-operating
• Ethernet Interface
Input VSWR
1.3:1 max.
• DC Power Supply
Redundancy
Module
High Power TVSS Option
Clamp Voltage
Output VSWR
3rd Order Intermod
Harmonic Output
Spurious
1.3:1 max.
440 VDC (line to line protection);
560 VDC (line to ground protection)
2 ms/250 J (line to line protection)
10%000 A repetitive
-25 dBc max. at 3dB total backoff from P1dB
-60 dBc max. at P1dB
Energy Absorption
Peak Current Shunt
• External Receive
Band Reject Filter
-60 dBc max. at P1 dB (-55 dBc w/
BUC option
Mechanical
Cooling
• High Power
Transient Voltage
Surge Suppressor
(TVSS)
Residual AM
-50 dBc below 10 kHz
-20 [1 +log F(kHz)] dBc%
10 kHz to 500 kHz
Forced air with integral blower
Type N female
RF Input Connection
RF Output Connection
-85 dBc above 500 kHz
CPR-137 waveguide flange%
grooved
Noise Power Density
-80 dBW/4 kHz in transmit band%
-135 dBW/4 kHz from 3.7 to 4.2 GHz
RF Output Monitor
Type N female
Phase Noise
10 dB below IESS phase noise profile% max.
1.0°/dB max. at 3dB backoff from P1dB
Dimensions (WxHxD)
19.0 x 5.25 x 26 in.
(483 x 134 x 661 mm);
19.0 x 7.00 x 26 in.
AM/PM Conversion
(483 x 178 x 661 mm) with DC
Power Supply Redundancy Option
Weight
76 lbs (34.6 kg) typ.% no options
SSPA with optional redundant hot-swappable power supplies
Note 1: For 5.850 to 6.725 GHz option% output power is lower. Check technical description or
contact your CPI representative for details.
Certificate Number: 30515
For more detailed information, please refer to the corresponding CPI Technical Description.
Note: Specifications may change without notice as a result of additional data or product refinement.
Please contact CPI before using this information for system design.
MKT 197, ISSUE 8
05/08 PDF
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00315/img/page/SSPB100060_1894858_files/SSPB100060_1894858_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00315/img/page/SSPB100060_1894858_files/SSPB100060_1894858_2.jpg)
SSPB100060
Rectifier Diode, 1 Phase, 2 Element, 100A, 600V V(RRM), Silicon, ROHS COMPLIANT PACKAGE-4
MICROSEMI
©2020 ICPDF网 联系我们和版权申明