T02UO-2G [CPI]
200W Outdoor TWT Amplifier; 200W户外TWT放大器
| 型号： | T02UO-2G |
| 厂家： | 
COMMUNICATIONS & POWER INDUSTRIES, INC. |
| 描述： | 200W Outdoor TWT Amplifier |
| 文件： | 总2页 (文件大小：157K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NEW 200W Outdoor TWT Amplifier
for Satellite Communications
Ku-Band
The T02UO-2G
200 Watt TWT Power
Amplifier — higher
efficiency in an
environmentally sealed
compact package
designed for outdoor
operation
note: photo is not necessarily representative of your desired configuration
Less Prime Power, More Efficient
Highly Compact
CPI's new environmentally sealed 200 W
Ku-band hubmount TWTA is the most efficient
amplifier in its class. Consuming only 650 W
prime power to achieve 175 W at the flange, the
Mini-Ku is at least 24% more efficient than any
similar product.
10% smaller and 25% lighter than any other
200 W TWTA.
Easy to Maintain
Modular design and built-in fault diagnostic
capability via remote monitor and control.
Reliable
Global Applications
Designed and built to survive in extremely
adverse environmental conditions. Operates in
Meets International Safety Standard EN-60215,
Electromagnetic Compatibility 2004/108/EC
and Harmonic Standard EN-61000-3-2 to satisfy
worldwide requirements.
°
ambient temperatures up to 60 C.
Digital Ready, Simple to Operate
User-friendly microprocessor-controlled logic.
Integrated Ethernet computer interface
and forward power detection over CIF are
now standard. A variety of optional
Worldwide Support
Backed by over three decades of satellite
communications experience and CPI’s worldwide
24-hour customer support network that includes
sixteen regional factory service centers.
configurations, including integral linearizers
and BUCs, is available.
811 Hansen Way
P.O. Box 51625, Palo Alto, CA 94303
tel: +1 (650) 846-3803
fax: +1 (650) 424-1744
e-mail: satcommarketing@cpii.com
www.cpii.com/satcom
Ku-Band
SPECIFICATIONS, T02UO-2G
Electrical
Electrical (continued)
Frequency
13.75 to 14.50 GHz (outputꢂ
wideband option 12.75 to 14.50 GHz)
950 MHz to 1700 MHz (input w/BUC option)
Intermodulation
-24 dBc max. with respect to the
sum of both carriers at total output
power 7 dB OBO (4 dB OBO with
optional linearizer)
Output Power
TWT
Flanꢁe
200 W min. (53.01 dBm)
175 W min. (52.43 dBm)
Primary Power
100-240 VAC 10ꢀ sinꢁle phaseꢂ
47-63 Hz
O P T I O N S :
Bandwidth
Gain
750 MHz (1750 MHz with wideband option)
Power Consumption
Power Factor
650 W typ.
0.95 min.
• Remote Control Panel
• Redundant Subsystems
35 dB min. at rated power output
(68 dB min. with SSIPA option);
41 dB min. at small siꢁnal
Environmental (Operating)
• Integrated 1:1 switch
control and drive
Ambient Temperature
-40°C to +60°C operatinꢁꢂ
includinꢁ solar loadinꢁ;
-40°C to +71°C non-operatinꢁ
(70 dB min. with SSIPA option)
Gain Stability
0.45 dB/24hr max.
(at constant drive and temp.)
• Integral Linearizer
Relative Humidity
Altitude
100ꢀ condensinꢁ
Small Signal Gain Slope
0.04 dB/MHz max.
• Extended Frequency ---
12.75 - 14.50 GHz
10ꢂ000 ft. with standard adiabatic
deratinꢁ of 2°C/1000 ft.ꢂ operatinꢁ;
50ꢂ000 ft.ꢂ non-operatinꢁ
Small Signal Gain Variation
1.0 dB pk-pk across any 80 MHz band;
3.5 dB pk-pk across the 750 MHz band
5.0 dB pk-pk across 1750 MHz
(wideband option)
• Integral L-Band Block
Upconverter (BUC
--- option is available
over 12.75 to 13.25 GHz
OR 13.75 to 14.50 GHz
frequency ranges only)
Shock
20 ꢁ pkꢂ 11 mSꢂ 1/2 sine
3 ꢁrms
Vibration
RF Level Adjust Range
Input VSWR
30 dB typ. (not available with low ꢁain version)
1.3:1 max.
Acoustic Noise
Mechanical
Cooling
65 dBA @ 3 ft. from amplifier
Output VSWR
2.2:1 max. (1.3:1 max. with optional
output circulator)
Forced air with inteꢁral blower
Load VSWR
2.0:1 max. continuous operation; any value for
operation without damaꢁe
• Attenuated Solid State IPA
L-Band Input Connection Type N female (BUC option only)
RF Input Connection
RF Output Connection
Type N female (standard)
MUXed External 10 MHz
Reference Phase Noise
Required (L-Band Input
950 - 1700 MHz) 1
-120 dBc/Hz at 10 Hz
-140 dBc/Hz at 100 Hz
-145 dBc/Hz at 1 kHz
-150 dBc/Hz at ≥10 kHz
(Level -3 to +7 dBm)
WR-75 waveꢁuide flanꢁeꢂ
ꢁrooved with UNC 2B 6-32
threaded holes
BUC option only
RF Output Monitor
Type N femaleꢂ 44 dB nom.
Single Sideband Phase Noise -63 dBc at 100 Hz offset
Dimensions (WxHxD)
8.5 x 8.5 x 15.0 in. max.
(216 x 216 x 381 mm)
BUC option only
-73 dBc at 1 kHz offset
-83 dBc at 10 kHz offset
-93 dBc at 100 kHz offset
-103 dBc at 1 MHz offset
-113 dBc at ≥10 MHz offset
Weight
24.25 lbs (11.0 kꢁ) with no options;
25.41 lbs (11.5 kꢁ) with BUC
Note 1: External 10 MHz reference must be multiplexed with the RF input signal.
Residual AM
Phase Noise
-50 dBc below 10 kHz
-20 [1.5 + loꢁ F(kHz)] dBc
10 kHz to 500 kHz
12 dB below IESS-308 continuous mask
(3 dB below mask with BUC option)
Spurious
-60 dBc max. at 175 W flanꢁe output
AM/PM Conversion
2.0°/dB max. for a sinꢁle carrier up to 7 dB
OBO (up to 4 dB OBO with linearizer option)
Harmonic Output
-60 dBc max. at rated power
Noise Power Density
(at maximum gain)
<-130 dBW/4 kHzꢂ below 12.7 GHz
<-70 dBW/4 kHzꢂ passband
<-66 dBW/4 kHzꢂ passband with linearizer
Certificate Number: 30515
For more detailed information, please refer to the corresponding CPI Technical Description.
Note: Specifications may change without notice as a result of additional data or product refinement.
Please contact CPI before using this information for system design.
MKT 249, ISSUE 10
02/09
PDF
相关型号：
©2020 ICPDF网 联系我们和版权申明